How To Program HomeLink Garage Door Opener In A Tesla (2026)

HomeLink lets a Tesla open a garage door, gate or similar device from the touchscreen.

You program each device from the Controls screen, and the car can then open and close it automatically as you come and go.

This guide follows Tesla’s Model Y owner’s manual section on HomeLink and Tesla’s HomeLink support page.

Quick answer: program HomeLink in a Tesla

TaskWhere Tesla says to do it
Add a deviceTouch the HomeLink icon at the top of the Controls screen, then Create HomeLink
Change auto open and closeHomeLink icon > HomeLink Settings > select the device
Fix a device that opens late or not at allHomeLink icon > HomeLink Settings > device > Reset Location
Remove a deviceHomeLink icon > HomeLink Settings > device > Delete
Number of devicesUp to three radio-frequency devices

Check your car has HomeLink first

Tesla says not every car has HomeLink, because availability depends on the build date, market region and options chosen at purchase.

Tesla’s support page describes HomeLink as a retrofit for Model 3 and Model Y that you buy in the Tesla Shop.

Only a Tesla service technician can install it, and after checkout you book a service appointment in the Tesla app.

Our guide on how to schedule or cancel a Tesla service appointment covers that booking.

Do not use HomeLink with a device that lacks safety stop and reverse features, because Tesla warns this raises the risk of injury or death.

Pick the right transmit mode

ModeUse it for
Standard ModeDevices operated by a remote control, the most common mode
D-ModeDevices with no remote where the receiver has a Learn, Program or Smart button, mainly in North America
UR-ModeWorks like D-Mode and is common in Europe, the Middle East and Asia

Each device can use a different mode, and you can check compatibility in the device’s product information or at homelink.com.

How to program a device

  1. Park with the front bumper in front of the device and clear people and objects from its path.
  2. Put a fresh battery in the remote, which Tesla recommends.
  3. Touch the HomeLink icon at the top of the Controls screen, then Create HomeLink.
  4. Enter a device name, then touch Enter or Add New HomeLink.
  5. Choose a mode, touch Set Mode, then touch Start and follow the instructions.
  6. Complete the training steps when prompted, then touch Save.
  7. Test the device.

Tesla warns that the device may move during programming.

It also says you may need to repeat programming several times before it works.

Train the receiver in time

For a device with a Learn, Program or Smart button, you have about 30 seconds after pressing that button.

In that time return to the car, touch Continue, and press the trained HomeLink device name twice.

Tesla suggests having an assistant help, because the window is short.

If Standard Mode will not pair

  • Stand in front of the car and hold the remote within 5 cm of the Tesla emblem, pointing it at the front bumper.
  • Hold the button until the headlights flash, and note that some remotes need up to three minutes.
  • Some remotes need repeated short presses of about one second instead of one long press.
  • Replace the remote’s batteries if the headlights do not flash.

If D-Mode or UR-Mode will not pair

  • Park with the bumper as close as possible to the door or gate.
  • Press the receiver’s Learn, Program or Smart button, not the remote’s buttons.
  • Follow the touchscreen instructions right away, because learning mode usually lasts only three to five minutes.

How to open and close it

Touch the device’s HomeLink icon on the touchscreen to operate it.

The icon appears at the top of the touchscreen when you approach a known location and disappears when you drive away.

Tesla says the icon does not appear if the HomeLink screen or a popup is already open.

Set up auto open and auto close

SettingWhat it does
Auto-open when arrivingOpens the device as you approach, with a distance you set using the arrows
Auto-close when leavingCloses the device as you drive away
Auto-fold mirrorsFolds the mirrors on arrival, useful in narrow garages
ChimeSounds when an auto-open or auto-close signal is sent

Go to the HomeLink icon, then HomeLink Settings, and select the device.

Tesla says HomeLink stores the car’s GPS location when you pair, and uses it to judge your distance.

When auto open and close trigger

  • Auto-open triggers when the car approaches within the set distance in Drive, and does not trigger if the car is already within the area.
  • Auto-close triggers when you shift from Park to Reverse and move at least seven meters in Reverse.
  • Shifting gears several times within the set distance may interfere with Auto-close.
  • Touch Skip Auto-Open or Skip Auto-Close during the countdown message to prevent either action.

HomeLink does not know whether a door is open or closed, so an auto-open on an open door closes it.

Do not rely on HomeLink to confirm that a device has fully closed.

If it does not open on approach

Tesla says to reset the device’s location if it sometimes does not open on approach or the touchscreen does not show the notification.

Park as close as possible to the device, then go to HomeLink Settings, select the device and touch Reset Location.

Delete a device before you sell the car

Go to HomeLink Settings, select the device and touch Delete.

Tesla recommends deleting devices before selling the vehicle for security reasons.

A factory reset also erases HomeLink settings along with other personal data, such as saved addresses.

Older cars and Valet Mode

On older vehicles, changing one device’s mode changes all of them, so use Change Transmit Mode with care.

Tesla says incompatible devices may stop working after that change.

HomeLink is inaccessible in Valet Mode, as covered in our Tesla Valet Mode guide.

Where to get help

Tesla’s manual lists HomeLink at www.homelink.com or 1-800-355-3515.

Sources: Tesla Model Y Owner’s Manual: HomeLink and Tesla Support: Automatic Garage Opener, HomeLink.

Leave a Reply

Your email address will not be published. Required fields are marked *