Tesla FSD Speed Profiles: Sloth, Chill And Mad Max (2026)

You change the Tesla FSD speed profile at Controls > Self-Driving > Speed Profile, or by rolling the right scroll button up or down on the steering wheel.

The profile decides how fast the car drives with Full Self-Driving (Supervised) engaged and how often it changes lanes to keep up.

This guide follows Tesla’s Model Y owner’s manual and Tesla’s FSD support pages, which describe the profiles a little differently.

Quick answer: the five speed profiles

ProfileWhat Tesla’s manual says
SlothDrives at or below the speed limit (the default)
ChillDrives in slower lanes with minimal lane changes
StandardDrives at normal speed and adjusts to the flow of traffic
HurryDrives faster with more frequent lane changes
Mad MaxDrives faster than Hurry, with more frequent lane changes

Tesla’s support page for Canada lists the same five names and says the list may include others, so your car could show more.

How to change the speed profile

  1. Touch Controls on the touchscreen, then Self-Driving.
  2. Touch Speed Profile.
  3. Pick one of the profiles.

You can also tap Self-Driving on the screen while FSD is engaged and change it there.

On the steering wheel, roll the right scroll button up or down to move between profiles.

Tesla’s manual says your choice becomes the default the next time you use the feature and is saved to your driver profile.

If the car restores a different profile when someone else drives, see our guide to setting up and switching Tesla driver profiles.

What the car uses besides the profile

Tesla’s manual says the car also uses navigation data, historical data from other Tesla vehicles, nearby traffic speed and posted speed limits.

That means the profile is a preference, not a fixed speed, and it does not replace your responsibility for the car.

Tesla’s FSD page states that you are responsible for speed and control whether FSD is enabled or not.

Where Tesla’s pages disagree

The two sources do not describe Sloth the same way.

SourceHow it describes Sloth
Model Y owner’s manual (US)Drives at or below the speed limit, and it is the default
Tesla FSD support page (Canada)Drives more slowly than Chill, with less frequent lane changes

Both agree that Sloth is the slowest profile, so use it if you want the most relaxed drive.

The manual page we read does not mention a Max Speed offset setting, which Tesla’s Australian support page lists under customization.

Menus can differ by region, software version and car, so trust what your own touchscreen shows.

Turn FSD on before the profile matters

The profile only applies once FSD (Supervised) is available on your car.

Tesla’s manual says to enable it while the car is in Park.

  1. Touch Controls > Self-Driving > Full Self-Driving (Supervised).
  2. Read the popup and touch Yes.

If you do not see the option, see our guide to the FSD subscription price and how to subscribe.

What must be true to engage

RequirementDetail from the manual
SpeedBelow 85 mph (140 km/h)
DriverSeated with the seat belt buckled
HeadlightsOn or Auto
ClosuresDoors, trunk and frunk closed
ChargingNo charge cable connected
ModesNot in Valet Mode, Track Mode or another restricted mode
CamerasClean, unobstructed and calibrated, with maps updated

If the car refuses to start, check Valet Mode first, because the manual lists it as a blocker.

How to start and stop FSD

To start, press the right scroll button while the feature is available, or tap Start Self-Driving on the touchscreen.

If the car is in Park, tapping Start Self-Driving makes it shift and pull out, and Tesla says to press the brake if prompted.

The manual lists these actions as ending it.

  • Press the brake pedal.
  • Press the right scroll button.
  • Steer manually.
  • Shift out of Drive.
  • Open a door or the trunk.
  • An Automatic Emergency Braking event occurs.
  • Release the seat belt or leave the driver’s seat.
  • Ignore repeated attention reminders.

It also ends if the feature becomes unavailable, for example when a camera is obscured.

Other settings that change how it drives

SettingWhat it does
Use HOV LanesLets you choose, before you use FSD, whether the route may use High Occupancy Vehicle lanes
Brake ConfirmRequires a brief brake press to confirm each start from Park

Tesla says FSD starts its own lane changes without asking for confirmation.

You can signal a preference with the turn signals, but a signal may not cancel a lane change or turn already in progress, so steer or use other controls to cancel it.

What Tesla’s US support page adds

Tesla’s US FSD page lists Sloth, Chill, Standard, Hurry and Mad Max under Controls > Self-Driving > Speed Profile.

It says each profile changes the car’s speed and how often it changes lanes.

The same page puts the Use HOV Lanes choice under Controls > Navigation, so look there if you want routes to include or avoid those lanes.

It also says you can engage FSD at any speed below 85 mph.

Attention warnings still apply

Tesla’s US page says a strikeout happens when FSD disengages for the rest of a trip after several audio and visual inattentiveness warnings.

A strikeout is forgiven after half a week if no new one occurs, and three or five strikeouts, depending on configuration, suspend FSD for a week.

Picking a faster profile does not change those rules, and our guide to how Tesla FSD strikes work shows where to check yours.

Which profile to pick

For a first drive, Sloth or Chill keeps lane changes to a minimum, according to Tesla’s descriptions.

Hurry and Mad Max trade a calmer ride for faster driving and more lane changes, so keep your hands ready.

Whatever you pick, the cabin camera and wheel sensors still check that you are paying attention, as covered in our guide to Autopilot vs FSD.

Sources: Model Y Owner’s Manual: Full Self-Driving (Supervised), Tesla Canada: Full Self-Driving (Supervised) and Tesla Australia: Full Self-Driving (Supervised).

Leave a Reply

Your email address will not be published. Required fields are marked *