|

How To Fix A Surface Red Bar And Unlocked Lock At Startup (2026)

A red bar across the top of the Surface screen with an unlocked lock icon is a start-up warning, not a crash.

Microsoft says the screen means Secure Boot is turned off.

The fix is a short trip into Surface UEFI, and it does not need any tools.

Quick answer: turn Secure Boot back on

ItemDetail
What you seeA red bar at the top of the screen with an unlocked lock icon
What it meansSecure Boot is turned off
Where to fix itSurface UEFI > Security > Secure Boot > Change Configuration
Applies toSurface Pro, Surface Laptop, Surface Go, Surface Studio and Surface Book

What the red bar and unlocked lock mean

Microsoft’s page says that if you see this screen, Secure Boot is turned off.

Secure Boot helps stop malicious software from loading while the PC starts.

The warning stays on screen at start-up until the setting is switched back on.

Before you start

You only need the Surface itself, because everything happens on the UEFI screen at start-up.

If you set a UEFI password in the past, have it ready, because Microsoft says UEFI passwords cannot be reset and Microsoft cannot retrieve them.

Devices that belong to a school or company may have locked firmware settings, so ask the IT administrator if the options will not change.

Turn Secure Boot on in Surface UEFI

  1. Fully power off the Surface and wait about 10 seconds.
  2. Hold the volume-up button, then press and release the power button.
  3. When the Microsoft or Surface logo appears, keep holding volume up until the UEFI screen opens.
  4. Open the Security tab.
  5. Under Secure Boot, select Change Configuration.
  6. Choose a Secure Boot certificate keyset, which Microsoft’s example shows as Microsoft only.
  7. Select Exit, then select Restart to save the change and reboot.

The path in one line

Security > Secure Boot > Change Configuration > choose the keyset > Exit > Restart.

The same path appears in Microsoft’s manual Secure Boot certificate update steps for earlier Surface models.

Open UEFI from Windows instead

If Windows starts normally, you can reach the same screen without the button combination.

  1. Go to Settings > System > Recovery.
  2. Next to Advanced startup, select Restart now.
  3. Choose Troubleshoot > Advanced Options > UEFI Firmware Settings.
  4. Select Restart.

After the restart

The red bar should be gone when the Surface starts again.

If it returns, repeat the steps and confirm the Security tab shows Secure Boot with a keyset selected.

Microsoft says most people can keep the default security settings, so avoid changing other options on that screen.

Why Secure Boot certificates are in the news

Microsoft is replacing the Secure Boot certificates it issued in 2011, and they begin expiring in June 2026.

Most users need to do nothing, because the newer 2023 certificates arrive automatically through Windows Update.

Surface devices released in 2024 and later already include the updated UEFI Secure Boot database.

Check the certificate status in Windows

Open the Windows Security app and go to Device security > Secure Boot to see the status.

BadgeMeaningWhat Microsoft says to do
Green checkmarkAll required updates are appliedNothing
Yellow cautionAn older certificate is in useKeep the device online and fully updated, and contact the manufacturer if a limitation is reported
Red stop iconA boot security update cannot be delivered to the current boot configurationVisit aka.ms/getsecureboot

Manual UEFI update for earlier Surface models

Earlier models that do not want to wait for Windows Update can apply the certificate change by hand.

Microsoft warns that this triggers BitLocker recovery, so back up your BitLocker recovery key before you begin.

The steps are the same as above: Security, Change Configuration, Microsoft only, then Exit and Restart now.

Minimum UEFI versions with Secure Boot updates

Surface modelMinimum UEFI version
Surface Go 311.200.143.0
Surface Go 48.200.143.0
Surface Laptop Go 226.102.143.0
Surface Laptop Go 310.200.143.0
Surface Laptop 4 (Intel)23.200.143.0
Surface Laptop 4 (AMD)4.200.140.0
Surface Laptop 59.200.143.0
Surface Laptop Studio23.200.143.0
Surface Laptop Studio 216.200.143.0
Surface Pro 717.200.140.0
Surface Pro 7+23.200.143.0
Surface Pro 823.200.143.0
Surface Pro 912.200.143.0
Surface Pro 9 with 5G18.7.235.0
Surface Pro X WiFi10.703.140.0
Surface Laptop SE7.9.139.0
Surface Studio 2+20.101.143.0
Surface Book 317.200.140.0

What the Windows Security messages say

The Secure Boot page in Windows Security shows a short message next to the badge.

Message (paraphrased)Action
Secure Boot is on and all required updates are appliedNone
Secure Boot is on, but the device uses an older boot trust configurationInstall the latest Windows updates and restart if prompted
A known issue has temporarily paused certificate updatesNone, because updates resume automatically once the issue is resolved
Hardware or firmware limitations prevent the automated updateContact the device manufacturer

Microsoft says a green checkmark alone does not confirm the update, so read the text to see that Secure Boot is on and all required certificate updates are applied.

Dismissing the warning

Microsoft advises against dismissing a warning if the device has not received the updated certificates.

For a yellow caution, select Dismiss under the status message.

For a red warning, select I accept the risks, don’t remind me, which requires administrator privileges.

Secure Boot and USB recovery drives

Newer Surface recovery images require the 2023 Secure Boot certificate, according to Microsoft’s recovery drive page.

Microsoft’s USB boot page adds that if you installed a Windows Insider build, you should turn Secure Boot off and back on so a USB drive is recognized.

If a drive still will not start the Surface, open Boot configuration > Advanced options in UEFI and make sure Enable Boot from USB devices is on.

If the warning will not go away

Open the Surface app or the Microsoft support page, describe the problem and select Get Help.

You can also ask in the Microsoft community forums or open the Get Help app.

Official sources

Leave a Reply

Your email address will not be published. Required fields are marked *