How To Fix Slack Desktop App Not Opening Or Loading (2026)

When the Slack desktop app will not open or load, your team messages stay out of reach.

Slack’s help center covers this with fixes for loading errors, outdated installs and network blocks.

Work through the fixes below in order, starting with the cache restart that Slack names first.

Quick answer: Slack desktop app will not open or load

What you seeFirst fix
“Slack cannot connect”Click Restart Slack under the error, which clears the cache and restarts the app
“For some reason, Slack couldn’t load”Help, then Troubleshooting, then Clear Cache and Restart
“Something went wrong, but we’re looking into it”Reload with Ctrl+R on Windows or Cmd+R on a Mac, then check slack-status.com
Old version that will not updateUpdate from Help, then Check for Updates, or uninstall and reinstall
Works at home but not at the officeAsk your network administrator about firewall, proxy and WebSocket rules

Slack groups these problems by the message on screen, so match your message first.

The steps below follow the Windows app, with the Mac differences noted where Slack gives them.

What the error messages mean

MessageCause Slack lists
Slack cannot connectNetwork, proxy, firewall, antivirus or VPN settings
For some reason, Slack couldn’t loadBrowser extensions, a security device, or an issue on Slack’s end
Sorry! Something went wrong, but we’re looking into itA server error
Grey banner: Last updated less than a minute agoWebSocket trouble, so new messages may not arrive automatically

Slack’s own article lists these four messages for desktop and browser use.

Fix 1: use the Restart Slack button

For the “Slack cannot connect” message, Slack’s first step is on the error screen itself.

  1. Click Restart Slack below the error message.
  2. Wait while the app clears its cache and restarts.
  3. If the same message returns, move on to the network fixes further down.

Slack says this button clears the cache as part of the restart.

Fix 2: clear the cache and restart

This is Slack’s listed fix when the app says it could not load.

  1. Open Help in the menu bar, or click the three-line icon at the top left if you are on Windows 10.
  2. Select Troubleshooting.
  3. Click Clear Cache and Restart.

If you cannot reach the menu because the window never draws, go to the update and reinstall fixes below.

Fix 3: reload and check Slack’s status

For the “Something went wrong” message, Slack tells you to reload first.

  • Press Ctrl+R on Windows or Linux, or Cmd+R on a Mac, from the desktop app.
  • If it persists, open slack-status.com to see whether Slack lists a known incident.
  • If no incident appears, contact Slack, because the fault is not a known outage.

Our Slack notifications guide covers the app once it does load.

Fix 4: update the Slack desktop app

Slack recommends running the latest version and says to check which install you have first.

Install typeHow to find itHow to update
Windows, direct downloadClick the three-line icon, then Help, then About SlackThree-line icon, Help, Check for Updates, then Restart to Apply Update
Windows, Microsoft StoreAbout Slack names the Microsoft StoreMicrosoft Store, the three-dots button, Downloads and updates, then Get updates
Mac, direct downloadSlack menu, then About SlackSlack menu, Check for Updates, then Restart to Apply Update
Mac, App StoreAbout Slack names the App StoreApp Store, Updates, then Update next to Slack

If your Windows version number starts with MSQ, Slack says your organization manages updates, so contact your IT team or Slack admins.

Fix 5: run Slack’s connection test

Slack points to a built-in test page when the app loads slowly or fails.

  1. Open slack.com/help/test in a browser.
  2. Read the result for each check.
  3. If it reports errors, contact your network administrator.

Admins can also use my.slack.com/help/test, where the two WebSocket rows, Flannel Primary and Flannel Backup, show a checked circle on success and a warning icon on failure.

Fix 6: check antivirus and ad blockers

Slack names software that can interfere with the connection.

  • Antivirus and ad-blocking tools it lists: Avast, McAfee, Norton, AVG and AdBlock Plus.
  • Other interfering software it lists: Avira Browser Safety, Browser Guard, Pokki, Smart Panel, Visual Discovery by Superfish, and spyware or adware.

Slack says to turn the antivirus or ad blocker off temporarily to test, and if that fixes it, make sure Slack is allowed in that software.

Turn protection back on after the test.

Fix 7: uninstall and delete the app data

Slack gives this reset for updates that fail or an install that stays on an old version.

Quit Slack first, and note that Slack says these steps delete local app data.

  1. Open Task Manager and confirm no Slack.exe or Update.exe process is running.
  2. In Settings, open Apps and then Apps and features, find Slack, and uninstall it.
  3. Press Windows key + R, type %AppData%, and delete the Slack folder.
  4. Repeat with %LocalAppData%.
  5. Download Slack again from slack.com/downloads/windows.

For the Microsoft Store version, Slack adds a step that deletes the Slack folder under the app’s package path in your user profile, then reinstalls from the Store.

On a Mac, Slack has you move Slack to the Trash, clear its Application Support folder and download it again from slack.com/downloads/mac.

Check that your system is supported

SystemMinimum Slack lists
WindowsWindows 11 version 23H2 or later, and Windows Server 2016
macOSmacOS 14 or later
Desktop app version4.47.59 or above on all platforms

Slack says it updates these requirements in May and November, so recheck its page if your system is older.

Network and firewall settings

On a work or school network, the block is often outside the app.

  • Slack keeps a persistent connection using WebSockets over port 443.
  • Admins should allow every URL listed at my.slack.com/help/urls.
  • If a proxy decrypts SSL, it must support WebSockets or exempt wss-primary.slack.com, wss-backup.slack.com and wss-mobile.slack.com.

Send this list to your administrator rather than changing network settings yourself.

Collect Net Logs for Slack support

When nothing works, Slack asks for a Net Log from the desktop app.

  1. Open Help, or the three-line icon on Windows 10, and select Troubleshooting.
  2. Click Restart and Collect Net Logs.
  3. Use Slack until the problem happens, then click Stop Logging in the pop-up.
  4. Find the zip file in your Downloads folder and send it through Slack’s support request form.

Slack’s form is at slack.com/help/requests/new.

A different Microsoft chat app has its own loading fix in our Teams stuck loading guide.

If you are on the free plan and older messages are missing, read our Slack free plan 90-day history guide.

Official sources

Leave a Reply

Your email address will not be published. Required fields are marked *