How To Fix Pixel Touchscreen Not Responding (2026)
Your Pixel screen is ignoring your taps, or it reacts to touches you did not make.
Google has a short list of fixes for this, and most of them take less than a minute each.
This guide goes from the quickest physical checks to built-in diagnostics and, as a last step, repair, and it takes about 15 minutes.
Quick answer: what to try first
| Try this | Where | Works for |
|---|---|---|
| Remove case, screen protector, stickers and gloves | On the phone | All Pixel models |
| Clean the screen | On the phone | All Pixel models |
| Touch diagnostics | Settings > Display & touch > Touch diagnostics | Pixel 9, 9 Pro and 9 Pro XL |
| Adaptive touch | Settings > Display & touch > Touch sensitivity | Pixel 9, 9 Pro and 9 Pro XL |
| Screen protector mode | Settings > Display & touch > Touch sensitivity | Pixel 8a and earlier, including Fold |
| Software update | Settings > System > Software updates | All Pixel models |
Step 1: Check what is touching or covering the screen
Start with the physical causes, because they are the easiest to rule out.
- Case or screen protector: remove it and test again.
- Gloves: take them off.
- Stickers: peel off any that cover the screen or the sensors.
- Dirt: clean the screen.
Google warns that you may not be able to reapply a screen protector once it is off.
Is it only happening in one app?
If the touch problem shows up in a single app, the screen is probably fine.
Google’s advice in that case is to contact the app developer.
You can update that app from Google Play first, or restart the phone and try again.
Step 2: Restart the phone
On a Pixel 6 or later, hold Power and Volume up for a few seconds, then tap Restart.
On a Pixel 5a or earlier, hold the Power button for about 30 seconds, until the phone restarts.
If the screen will not respond to the on-screen Restart button, these button holds are still available.
Step 3: Run Touch diagnostics on a Pixel 9
- Open Settings.
- Tap Display & touch.
- Tap Touch diagnostics and run the test.
Google lists this for the Pixel 9, Pixel 9 Pro and Pixel 9 Pro XL.
If you share diagnostics data, the phone may send your account info, IMEI, model name and touchscreen hardware signals.
Step 4: Install the latest software update
Open Settings > System > Software updates and install anything that is waiting.
Google puts this step right after the diagnostics test if the test does not fix the problem.
Step 5: Adjust gesture navigation and Adaptive touch
If the problem is with swipes and gestures, change the sensitivity.
- Open Settings > System > Navigation mode.
- Tap Gesture navigation.
- Tap the settings gear and adjust the sensitivity.
Then open Settings > Display & touch > Touch sensitivity and turn Adaptive touch on or off to see which works better.
Step 6: Try Screen protector mode on older Pixels
On a Pixel 8a or earlier, including the Pixel Fold, go to Settings > Display & touch > Touch sensitivity.
Turn Screen protector mode on or off and test both ways.
Google says to try each setting to see which one helps.
Why does the screen only fail with certain apps installed?
A downloaded app can cause screen trouble, and safe mode tests that.
Follow our guide to starting a Pixel in safe mode, which temporarily disables downloaded apps.
If the screen works normally in safe mode, restart to exit it and remove recently downloaded apps one at a time, testing after each.
Safe mode also turns on airplane mode, so switch it off if you need calls, Wi-Fi or GPS.
How do the fixes differ by Pixel model?
| Pixel model | Setting to use | Path |
|---|---|---|
| Pixel 9, 9 Pro, 9 Pro XL | Touch diagnostics, Adaptive touch | Settings > Display & touch |
| Pixel 8a and earlier, including Fold | Screen protector mode | Settings > Display & touch > Touch sensitivity |
| All models | Gesture navigation sensitivity | Settings > System > Navigation mode > Gesture navigation |
Step 7: Use the Software Repair tool or reset
Google’s page for restarting and crashing phones lists two advanced options.
- Update and Software Repair tool: back up first, connect the phone to a computer by USB cable and follow the steps at pixelrepair.withgoogle.com.
- Factory data reset: back up first, because a reset removes all data and uninstalls apps.
Treat both as the last software steps before repair.
Step 8: Remove accessories and free up storage
Take off cases, external battery packs and other accessories, and make sure nothing covers the sensors or buttons.
Google also notes that phones can have problems when less than 10% of storage is free.
Check Settings > Storage and clear space if it is low.
Which fix matches which symptom?
| Symptom | Start with |
|---|---|
| Screen ignores taps everywhere | Remove case and protector, clean the screen, restart |
| Screen reacts too much or to accidental touches | Screen protector mode or Adaptive touch |
| Gestures do not register | Gesture navigation sensitivity |
| Only one app misbehaves | Update the app, then contact its developer |
| Fails after installing an app | Safe mode, then remove recent apps |
| Nothing helped | Software Repair tool, then repair |
Other screen problems that need different fixes
Flickering, cracks and lines are covered on a separate Google page about screen appearance, not touch.
If the screen is on but the fingerprint reader fails, see our guide to Pixel fingerprint not working.
For a general Android version of this problem, see an unresponsive Android touch screen.
When to get your Pixel repaired
If touch still fails after these steps, the screen may need repair.
Repair options depend on your warranty status and country, and Google covers repairs both in and out of warranty, but you pay for repairs that are not covered.
Sign in to your Google Account, open the Google Store repair page, choose your device and list the issues.
Then pick walk-in or mail-in service where it is offered.
Before you send the phone, back up your data and remove the SIM or transfer the eSIM.