| |

How To Reset Google Pixel Buds (2026)

Resetting Google Pixel Buds clears every setting so the buds can be paired again like new.

Google’s help center gives one 30-second reset for the current models and a separate case-button reset for the original 2017 buds.

This guide covers the steps, the lights to watch and the situations where Google says a reset is required.

Quick answer: reset Pixel Buds in 30 seconds

Do these steps in order and keep the case lid open the whole time.

StepWhat to do
1Forget Google Pixel Buds in your phone’s Bluetooth settings
2Connect the charging case to power with a USB-C cable
3Seat both earbuds in the case and leave the lid open
4Hold the pairing button on the back of the case for 30 seconds
5Release when the status light stops bouncing and turns off
6Pair again when the light bounces white

What a reset does

Google says a reset restores all settings to their defaults, including the device name and your feature preferences.

On Pixel Buds Pro 2 and Pixel Buds 2a it also removes the ability to find the buds with Find Hub until you set them up again.

Expect to go through setup afterwards as if the buds were new.

When a reset is the right fix

Google’s help pages name several situations where a reset is part of the official fix.

SituationWhat Google says
Pro 2 or 2a bought second-hand, refurbished or from a resellerReset is mandatory to transfer ownership and enable Find Hub tracking
Find when disconnected is missing on a Pro 2 or 2aReset the buds, then set them up again with Fast Pair
Buds will not connect after you forget and re-pair themReset is the third step on Google’s pairing page
Audio cuts in and out or skipsReset is one of the listed fixes, after the firmware update and a one-minute rest in the case
You received a replacement earbud or caseReset, then set up again so the new part syncs with your set

Before you reset

Start by opening the Bluetooth settings on your phone and forgetting Google Pixel Buds.

Connect the charging case to a power source with a USB-C cable.

Place both earbuds in the case and leave the lid open.

Google warns that if the buds are not seated correctly, the reset will not start.

Step-by-step reset for current Pixel Buds

  1. Forget the buds in Bluetooth settings on your device.
  2. Plug the case into power with the USB-C cable.
  3. Seat both buds in the case with the lid open.
  4. Press and hold the pairing button on the back of the case for 30 seconds.
  5. Keep the case open for the whole 30 seconds.
  6. Release the button when the earbud status light stops bouncing and turns off.

On the original Pixel Buds, Google says the status light is inside the open case.

What the lights mean during a reset

LightMeaning
Light bouncing before you startBuds are in pairing mode, not reset
Blinking orange and whiteReset in progress
Light stops bouncing and turns offRelease the pairing button
Bouncing white againBuds are reset and ready to pair

Pair the buds again

Leave the case open with the buds securely seated.

Press and hold the pairing button for 3 seconds until the light bounces white.

Follow the pop-up notification that appears on your phone.

Google adds that some Android devices need the buds added as a new device in Bluetooth settings.

Check each earbud before you assume a reset is needed

If one earbud seems dead, test it on its own first.

Plug the case in, take the buds out, then insert each one and watch its status light.

Status light on insertionMeaning
Blinks when insertedThe case detects the bud
OrangeThe bud is charging
WhiteThe bud is fully charged

Our Pixel Buds not charging guide covers a bud that never lights up.

Fix order when audio cuts out

Google lists these fixes for audio that cuts in and out or skips, in this order.

  1. Update to the latest firmware.
  2. Put the earbuds in the charging case for one minute, then take them out.
  3. Reset the Pixel Buds.
  4. Check that your internet connection works.
  5. Keep the earbuds close to your device with few obstructions between them.

The full audio checklist is in our Pixel Buds sound problems guide.

Reset after replacing one earbud or the case

Google says you can replace a left or right earbud, the charging case or the ear tips.

The steps are to identify the part, buy it through the Google Store by searching for Pixel Buds replacement, and then sync it with your set.

To sync the new part, reset your Pixel Buds and set them up again.

Replacement factDetail from Google
Parts offeredIndividual earbuds, charging case, ear tips
WarrantyCovers malfunctions, not accidental water or physical damage
AvailabilityVaries by area and is not guaranteed
CasesPixel Buds Pro and A-Series cases are marked with an asterisk; cases for other models are US only

Reset the original 2017 Pixel Buds case

The 2017 buds use a case button and LEDs instead of the pairing button.

If the buds do not respond in the case, remove them and hold the case button for 40 seconds.

White LEDs appear at first and turn off after 7 seconds, so keep holding.

At 40 seconds the leftmost LED dimly flashes amber 7 times, which means the case reset.

After that, hold the case button for 3 seconds while the green LED shows and pair when a single white LED pulses.

If the reset does not help

Google’s pairing page also links an interactive Pixel Buds Pairing Troubleshooter for guided help.

Google’s audio page says to clean dirt from the microphone and speaker holes and warns not to insert anything inside these openings.

Try the pairing steps in our Pixel Buds not pairing guide.

If a bud still fails after a reset, Google’s replacement page says warranty claims are for malfunctions.

Official pages used: Reset your Google Pixel Buds, Troubleshoot a pairing issue and Replace lost or damaged Pixel Buds.

Leave a Reply

Your email address will not be published. Required fields are marked *