How To Fix Outlook.com Can’t Send Or Receive Email (2026)
Your Outlook.com or Hotmail account will not send mail, will not receive mail, or both.
Microsoft lists a short set of causes for this, and most are quick to check.
Work through the checks below in order, which should take about 10 minutes.
Quick answer: the most likely causes
| Symptom | Likely cause | First check |
|---|---|---|
| Cannot send or receive anything | Microsoft cloud storage or mailbox is full | Check storage first |
| Cannot send or receive, storage fine | Recent password change or temporary account block | Update the password, then check for a block |
| Cannot send with a large file | Attachment over 25 MB | Share a OneDrive link instead |
| Send fails with a bounce message | Problem on the recipient side | Read the non-delivery receipt reason |
| Mail missing from inbox | Junk, Other tab, rules or forwarding | Check each one |
Microsoft puts storage first on its own troubleshooting page, so start there.
Step 1: Check whether storage is full
When your Microsoft cloud storage is full, you cannot send or receive Outlook.com email.
Microsoft says messages sent to you while storage was full are returned to the sender and cannot be recovered.
Open Outlook.com, select Settings, then Account, then Storage, to see what is using the space.
We cover the whole cleanup in our Outlook.com storage full guide.
Step 2: Check your password and account block
If storage is not full, Microsoft points to two account issues.
- Recent password change: update the password in every app and device that still uses the old one.
- Temporary block: your account can be blocked after unusual sign-in activity.
For the block, follow our locked Microsoft account guide.
If a verification code never arrives, see Microsoft security code not arriving.
Why can I not send email from Outlook.com?
Microsoft lists several causes for sending failures, each with its own fix.
| Cause | What to do |
|---|---|
| Attachment over 25 MB | Outlook cannot send it; use a OneDrive link instead |
| Non-delivery receipt with a correct address | Open Sender Support in Outlook.com and read the reason in the receipt |
| Brand new account | A low sending quota is temporary and rises as the account builds credibility |
| Signature causing an error | Remove the signature and send again |
| Recipient filters your mail | Ask the recipient to add your address to their safe senders list |
| Recipient not in your contacts | Add the people you email to your Outlook.com Contacts |
What does a non-delivery receipt tell me?
A non-delivery receipt, often called a bounce, usually states why the message failed.
- Invalid email address: the recipient does not exist.
- Mailbox full: the recipient cannot accept messages.
- Server issues: the recipient mail server is down or having problems.
- Spam filters: the recipient server blocked the message as spam.
If the address is correct, Microsoft sends you to Sender Support in Outlook.com.
What if the message is stuck in Drafts or Outbox?
Microsoft has a separate page for email that will not leave Outlook.com, and it lists four things to check.
| What to check | What to do |
|---|---|
| Message sitting in Drafts or Outbox | Find the stuck message in either folder and send it again |
| Attachment over 25 MB | Remove it and attach a smaller file, or upload to OneDrive and attach a link |
| Full inbox or Junk folder | Right-click Junk Email, then select Empty folder |
| Desktop Outlook on PC or Mac | Go to Send/Receive, then Send/Receive all folders |
The Microsoft page does not give wait times or retry intervals for stuck mail.
If a message keeps sitting in the Outbox after these checks, go back to step 1 and rule out storage.
How many emails can I send per day?
Microsoft publishes limits for Microsoft 365 subscribers and says limits are lower for non-subscribers, without giving those numbers.
| Limit | Microsoft 365 subscribers |
|---|---|
| Recipients per day | 5,000 |
| Recipients per message | 500 |
| Non-relationship recipients per day | 1,000 |
| Email attachment size | 25 MB |
| OneDrive share link | 2 GB |
A non-relationship recipient is someone you have never emailed before.
Microsoft says limits can vary with your usage history, so a new or rarely used account may be held lower.
Third-party accounts connected to Outlook.com follow the limits of their own provider, not Microsoft’s.
Microsoft does not say what happens when you hit a sending limit or when the limit resets, so contact support if you are blocked.
How can I raise my sending limit?
Microsoft does not promise results, but it suggests these steps.
- Keep your phone number, alternate email and profile information up to date.
- Use a password with upper and lower case letters, numbers and special characters.
- Add the people you email to your Outlook.com Contacts.
- Communicate with your contacts regularly.
- Use the Microsoft Authenticator app.
- Get a Microsoft 365 subscription.
Why can I not receive email in Outlook.com?
When mail does not arrive, Microsoft tells you to check the places where it can hide.
- Open the Other tab and check whether filters are keeping messages out of view.
- Open the Junk Email folder and review your Junk Email settings.
- Right-click a good message and choose Mark as not junk, and repeat for each one.
- Check whether email forwarding is turned on.
- Check your rules for anything that hides the messages you want.
If messages look out of order, select the Filter icon, then Sort, then Date.
What if Gmail or Yahoo mail will not work in Outlook?
Third-party mail services must support modern authentication and IMAP to work with Outlook Mobile and desktop apps.
If IMAP or POP is active on the account, it may interfere with the connected app, so Microsoft says to disable both and try again.
One error Microsoft calls out is that the recipient server did not accept your requests to connect.
For that error, Microsoft says to update your email address, which relates to adding or removing an email alias.
What to do if nothing works
- Use the interactive troubleshooter on the Microsoft support page.
- Select Help on the Outlook.com menu bar and type your question.
- If self-help fails, scroll to Still need help and select Yes.
- If you cannot sign in, use Microsoft’s separate support request link.
A specific missing message with no error is something Microsoft asks the sender to chase through Sender Support.