How To Fix Authenticator Authentication Did Not Complete (2026)

You tried to sign in with Microsoft Authenticator and the screen says Authentication did not complete.

Microsoft has a short support page for this exact message, and it lists six likely causes.

The steps below follow that page and two other Microsoft Authenticator support pages, and they start with the quickest checks.

Quick answer

Work down the list in order, because the first three fixes take seconds.

Likely causeWhat Microsoft says to do
The app is lockedUnlock Microsoft Authenticator on your device
Silent notificationsTurn on notifications for the app and check your text messages
Outdated appInstall the latest version of Microsoft Authenticator
Network problemConfirm the device is online, and try switching between Wi-Fi and mobile data
Wrong date or timeMake sure the device date and time are correct
Forgotten passwordReset the password

Unlock the app first

Microsoft says the box where you enter the number may not appear while the app is locked.

  1. Open Microsoft Authenticator on your phone.
  2. Unlock it with your device PIN or biometric if it asks.
  3. Go back to the sign-in screen and try again.

Microsoft’s FAQ describes App Lock as a setting that asks for your device PIN or biometric each time you open the app or approve a sign-in.

What App Lock does

App Lock is found on the Settings page inside Microsoft Authenticator.

DetailWhat Microsoft says
What it asks forYour device PIN or biometric
WhenEach time you open the app or approve a sign-in
DefaultOn once you set up a device PIN or biometric
LimitIt cannot fully stop access, because device registration can happen elsewhere

Turn on notifications and check your texts

If notifications are silent, you may never see the prompt that finishes the sign-in.

Microsoft’s page also says authentication codes may have arrived silently in your text messages, so look there.

  1. Open Microsoft Authenticator and tap Settings.
  2. Tap Notification Settings.
  3. Make sure Show notifications is on.

Microsoft also says to turn off Do Not Disturb or Quiet mode, because they can block notifications.

Update the app

An old version can fail even when everything else is correct.

Microsoft says it does not support Authenticator versions that are more than 12 months old.

  1. Update Microsoft Authenticator from your phone’s app store.
  2. Open the app, tap Settings, and make sure App updates is on.

Microsoft also recommends updating your device and related security apps such as Microsoft Defender and the Intune Company Portal.

Check the connection

Sign-in notifications need the internet, while codes do not.

MethodNeeds internet on the phone?
Sign-in notification you approveYes
Verification code shown in the appNo

That difference comes from Microsoft’s FAQ, which says the codes do not require you to be online.

  1. Switch between Wi-Fi and mobile data.
  2. Make sure Airplane mode is off.
  3. If you use a VPN, disconnect it and try again.

Fix the date and time

Authenticator needs an accurate local time to work properly.

Microsoft says that if your clock is set to manual, you should change it to automatic, restart the device and confirm the time is correct.

Microsoft ties this fix to notifications that always show as expired.

The same clock check is the first thing to try when Google’s app misbehaves, as our guide to Google Authenticator not working explains.

Location checks on work accounts

Microsoft says Authenticator denies a sign-in when the locations reported by GPS do not match.

The app asks for location permission because an admin may require periodic checks that you are in an allowed country.

Microsoft says only the country name is stored and reported to your admin, and exact coordinates are never saved on its servers.

If that applies to you, ask your IT admin rather than changing settings on your own.

Reset the password if you do not remember it

Microsoft lists a forgotten password as one reason you cannot finish signing in.

Follow our guide to changing or resetting your Microsoft account password.

If you are at a Windows lock screen, use the forgotten Microsoft password guide for Windows 11 instead.

Use a code if the notification will not arrive

The app generates a verification code on the phone, and that code works without internet.

Microsoft says the active code changes every 30 seconds, so an old one cannot be reused.

Microsoft warns never to read your code to anyone who calls or texts you, because real companies should not ask for it.

Notifications do not work for third-party accounts such as Google or Facebook, so those accounts use codes only.

Check for an old phone still running the app

Installing Authenticator on a new phone does not remove it from the old one.

Microsoft says to delete the app from the old phone and unregister that device from your account’s security page.

Our guide to moving Microsoft Authenticator to a new phone covers the whole switch.

Other messages that look similar

Microsoft’s troubleshooting page treats these as separate errors.

MessageWhat Microsoft says to do
Enable push notifications to receive alertsTurn on push notifications in device Settings, confirm the network works, remove the account and try again
We could not complete the sign-in at this timeConfirm push notifications and the network are on, remove the account, then sign in again

For the full notification checklist, read how to fix Microsoft Authenticator not sending notifications.

If it still fails

Microsoft says to send your log files before you contact anyone.

  1. Open Microsoft Authenticator.
  2. Open the top-level menu or settings.
  3. Select Send feedback.

Then contact Microsoft Support or post in the Microsoft Authenticator app forum, and describe the problem and the steps you tried.

On a work or school account, Microsoft says to contact your IT admin.

If the code for another sign-in method never arrives

A missing text or email code is a different problem from this error.

See fixing a Microsoft security code that does not arrive for that one.

Official sources

Leave a Reply

Your email address will not be published. Required fields are marked *