|

How To Fix iPhone Alarm Flashes But Makes No Sound Or Vibration On iOS 27 (2026)

Updated November 21, 2026: An Apple Support Community thread opened on September 16, 2026 has drawn 121 “me too” replies by November 5, according to the site TechBetweenTheLines, from owners on iOS 27.0 through 27.2.

The symptom is the same in every report: the alarm fires on time and the flashlight blinks, but the iPhone makes no sound and does not vibrate, and some people sleep through it.

This guide covers the causes owners have found, with steps from the simplest check to the most disruptive, plus what Apple has and has not said.

Quick answer: why a silent alarm happens

What you seeLikely causeFix
Alarm slider set low in Sounds & HapticsSeparate alarm volume on iOS 27, which some owners found turned down after updatingRaise Alarms and Timers or turn on Match Ringtone Volume
You wear an Apple Watch that has not updatedSoftware mismatch between watch and iPhone, per two ownersUpdate the watch to watchOS 27 or unpair an unsupported one
Sleep alarm only vibrates the watchIntended behavior when you sleep with the watch, per TechBetweenTheLinesTurn on Always Play on iPhone
Third-party alarm app fires lateDeveloper-reported AlarmKit problem, open at last checkAdd a backup alarm in the Clock app

What owners are reporting

Reports: the main thread began on September 16, and TechBetweenTheLines counted 106 replies by October 29 and 121 by November 5.

Owners say the problem survived the iOS 27.0.1 and 27.2 updates.

One reader with an older iPhone wrote on October 26 that alarms stopped sounding while the phone was on silent.

The same site says the problem is not limited to one iPhone model.

Has Apple acknowledged it?

No. TechBetweenTheLines says Apple has not commented, and I found no Apple support article describing the problem.

The site’s author filed a Feedback Assistant report on October 27, but that is a report, not a fix.

Some owners with no Apple Watch and the volume turned up still have silent alarms, so there may be more than one cause.

Step 1: run a test alarm

  1. Open the Clock app, then tap Alarms.
  2. Tap the Add button and set the time two minutes ahead.
  3. Tap Done and lock the iPhone.
  4. Watch whether it sounds and vibrates when the time comes.

Testing first saves you from guessing, and you can repeat it after each fix below.

Step 2: check the alarm volume

Apple says the alarm volume lives in Settings > Sounds & Haptics, under Alarms and Timers.

  1. Open Settings and tap Sounds & Haptics.
  2. Under Alarms and Timers, drag the slider up.
  3. Or turn on Match Ringtone Volume so the alarm follows your ringtone volume.
  4. Run another test alarm.

Apple also says you can turn on Change with Buttons to adjust the alarm volume with the side volume buttons.

Step 3: do not blame Silent mode

Apple states that your alarm still sounds when Silent mode or a Focus such as Do Not Disturb is on.

So a silent alarm is not caused by those settings under normal behavior.

With headphones connected, Apple says the alarm plays at its set volume through both the iPhone speakers and the headphones.

Step 4: check a paired Apple Watch

What owners found: one person updated a paired watch to watchOS 27 and alarms started sounding again, and another unpaired an older watch that could not run watchOS 27 and had the same result.

The site’s author guesses the devices disagree about which one should ring, but that is a theory Apple has not confirmed.

  1. On your iPhone, open the Apple Watch app.
  2. Tap My Watch, then go to General > Software Update.
  3. If an update is available, tap Download and Install.
  4. Run another test alarm.

Warning: unpairing backs up the watch to the iPhone, but you must set the watch up again to use it, so keep it as a last resort.

Step 5: check your sleep and wake-up alarm

TechBetweenTheLines says that if you sleep wearing your watch with a Sleep schedule, the iPhone can stay silent while the watch taps your wrist.

The site says to turn on Always Play on iPhone to hear the alarm on both devices.

  • Open Clock, tap Alarms, then tap Change on the Sleep and Wake Up alarm.
  • Scroll to Alarm Options and look for the setting there.
  • The same site also points to Health > Sleep > Your Schedule > Edit > Alarm Options.

Apple’s own page on changing a wake-up alarm lists Sounds & Haptics, Alarm volume and Snooze in Alarm Options but does not mention Always Play on iPhone, so I could not confirm that setting on Apple’s side.

Step 6: add a backup alarm if you use another alarm app

A developer reported to Apple that iOS 27 may not notify apps built on AlarmKit when an alarm fires until the app is reopened.

That report was still open when TechBetweenTheLines wrote about it.

Until it is sorted out, set a second alarm in the built-in Clock app.

Step 7: restart the iPhone

Turn the iPhone off and on using the normal power-off option, then run a test alarm.

If it will not respond, Apple’s force restart works the same on models with Face ID or a Home button.

  1. Press and quickly release the volume up button.
  2. Press and quickly release the volume down button.
  3. Press and hold the side button.
  4. Release it when the Apple logo appears.

A restart does not erase your data.

When to contact Apple Support

  • The test alarm is still silent after the volume, watch and restart steps.
  • You have no Apple Watch and the alarm volume is up, as some owners do.
  • You depend on the alarm for work or medication and cannot trust it.

You can also send feedback through Apple’s Feedback Assistant, and in the meantime set a backup alarm on another device.

Sources: Apple: Set an alarm on iPhone, Apple: Change your wake up alarm, Apple: Restart iPhone, Apple: Update Apple Watch software, TechBetweenTheLines alarm report, TechBetweenTheLines iOS 27 problem tracker.

Leave a Reply

Your email address will not be published. Required fields are marked *