How To Fix “This Accessory May Not Be Supported” On iPhone (2026)
The alert “This accessory may not be supported” appears when your iPhone or iPad cannot work properly with something plugged into its charging port.
Apple names three likely causes: a damaged accessory, an accessory that is not Apple-certified or not supported by your device, or a damaged or dirty port.
Work through the steps below in order, because the first few fixes take only a minute each.
Quick answer
| Step | What to do |
|---|---|
| 1 | Update iOS or iPadOS to the latest version. |
| 2 | Check that the accessory works with your iPhone or iPad model. |
| 3 | Unplug the accessory and plug it back in. |
| 4 | Look for damage or debris on both connectors and gently clean the device port. |
| 5 | Connect the charger directly, with no adapters in between, and try another cable or charger. |
| 6 | If the alert appears with nothing plugged in, book service with Apple. |
What the alert means
Apple’s support article uses the title “Accessory may not be supported” for the alert on iPhone, iPad and iPod touch.
When you are charging, Apple’s charging article describes a closely related alert called “Accessory Not Supported or Certified”.
Both point to the same short list of causes, so the same checklist applies.
| Possible cause | What it looks like |
|---|---|
| Damaged accessory | The alert appears with one cable or adapter but not with another. |
| Accessory not certified or not supported | A cheap or unbranded charger or a device that does not match your model. |
| Dirty or damaged port | The alert appears with several different accessories. |
| Charger not built to charge devices | A USB charger that is not designed for charging phones or tablets. |
Update iOS or iPadOS first
Apple says some accessories need the latest software before they work.
Install any available update, then plug the accessory in again.
If the update itself fails, follow our guide to a failed or stuck iPhone software update.
Check that the accessory fits your model
If this is the first time you use the accessory, confirm that it works with your exact device.
Apple notes that some accessories only work with certain iPhone, iPad or iPod touch models.
When you cannot tell, the maker of the accessory is the one to ask.
Reconnect the accessory
Disconnecting and reconnecting the accessory is the step Apple lists to clear the alert.
- Unplug the accessory from the iPhone or iPad.
- Wait a few seconds.
- Plug it back in firmly.
Inspect and clean the connectors
If the alert stays, look at the connector on the accessory and on the device for damage or debris.
Apple says to gently remove any debris you find and to clean the device’s connector.
For the port itself, do not push cotton swabs or paper towels inside it, which is Apple’s warning in its liquid-damage guidance.
If the port might be wet, see what to do when you see Liquid Detected in the connector.
If the alert appears while charging
Apple’s charging page gives a short list for the “Accessory Not Supported or Certified” alert.
- Connect the device directly to the charger, with no adapters or other equipment in between.
- Remove debris from the charging port.
- Restart the device.
- Try a different USB cable or charger.
- Update to the latest version of iOS.
If the device will not turn on after a restart, try a force restart on the iPhone.
For a tablet that charges slowly or not at all, use our iPad charging guide.
Using a USB-C iPhone or a Lightning adapter
iPhone 15 and later have a USB-C connector, and Apple says to use a USB-C cable with a power adapter that supports USB Power Delivery.
Apple also warns that devices and cables that are not USB-C compliant may not work as expected.
| Item | What Apple says |
|---|---|
| USB-C power adapter | A 20W adapter or higher charges faster. |
| Cable in the iPhone box | Supports charging and USB 2 speeds. |
| USB-C to Lightning Adapter | Works with iPhone and iPad models that have a USB-C connector, with up to 24W output when charging. |
| Adapter use | Use only one device or cable at a time with the adapter for best results. |
Apple adds that some combinations of adapters, cables and car systems can disrupt wired CarPlay, in which case a direct USB-A to USB-C cable is the fallback.
Check the Wired Accessories setting
If the accessory is recognised but does not work after you unlock the device, Apple advises disconnecting it, unlocking the device and reconnecting it.
On USB-C models you can review the permission under Settings > Privacy & Security > Security > Wired Accessories.
| Option (USB-C models) | Effect |
|---|---|
| Always Ask | You approve every accessory every time. |
| Ask for New Accessories | You approve an accessory the first time it connects. |
| Automatically Allow When Unlocked | Accessories are approved when connected to an unlocked device, which is the default. |
| Always Allow | All accessories are approved automatically, even when the device is locked. |
Lightning models offer only Automatically Allow When Unlocked, which is the default, and Always Allow.
Apple says storage accessories always need an unlocked device, whatever you choose.
Connecting other devices to a USB-C iPhone
Apple says iPhone 15 and later can charge small USB Power Delivery devices at up to 4.5 W, such as AirPods or an Apple Watch.
USB-C devices connect with a USB-C cable, while Lightning devices connect with an Apple USB-C to Lightning cable.
A car with a USB-A port needs a compliant USB-C to USB-A cable, according to Apple.
Third-party accessories can slow your connection
Apple notes that some third-party USB-C accessories and cables can interfere with wireless connections and slow Wi-Fi or mobile data.
Performance should recover once you disconnect the accessory, and Apple suggests unplugging accessories when you finish or trying a different cable.
The company points to its Thunderbolt 4 (USB-C) Pro Cable as one designed to reduce this interference.
When to contact Apple
If the alert appears when no accessory is connected, Apple says the device may need service.
If it only appears with one accessory, the accessory is the likely fault and its manufacturer is the right contact.
Apple’s charging page says that a device that still will not turn on or charge after the basic steps may need service.