How To Fix Tribit XSound Go Not Charging Problem
The Tribit XSound Go not charging issue can be caused by several factors. It could be due to the Bluetooth speaker software glitch, a defective wall charger, defective battery, or a defective speaker circuit. To fix this you will need to perform a series of troubleshooting steps on the device.
The Tribit XSound Go is a portable Bluetooth speaker that is capable of delivering a loud sound making it perfect for outdoor activities. It has a waterproof design allowing you to bring it with you on the beach or pool. Some of its features include a built-in mic for handsfree calls, Bluetooth 5.0, and a 24 hour playback time on a single charge just to name a few.
Technical specifications of the Tribit XSound Go:
- Driver size: 2 x 40mm, 1 x Passive radiator
- Output power: 2 x 6W
- Connectivity: Bluetooth V4.2
- Wireless range: Up to 66 feet
- Battery Capacity: 3.7V, 4400mAh
- Charging time: 4 hours @ 5V/1A
- Playtime: Up to 24 hours (varies by volume level and music files)
- Weight: 390g
- Dimensions (H x W x D): 56 x 59 x 170(mm)
What to do when your Tribit XSound Go won’t charge
One problem that you might encounter with your XSound Go Bluetooth speaker is when it does not appear to be charging when you connect its charger. This can be an annoying issue especially if the speaker is running low on power as you won’t be able to use it when the power gets drained. Here are the troubleshooting steps you need to do to fix the problem.
Method 1: Perform a factory reset on Tribit XSound Go
Sometimes this problem is caused by the software of the phone freezing. A factory reset or hard reset should be done in this case which will delete the data on this Bluetooth speaker and bring it back to its default settings.
Time needed: 2 minutes.
Reset the speaker
- Turn on the speaker.
You can do this by pressing on the Power button.
- Press and hold the Volume + and Volume – buttons for 5 seconds
This will reset the speaker.
After performing these steps try checking you can charge the Bluetooth speaker.
Method 2: Clean the speaker charging port to fix not charging issue
Sometimes dirt or debris will find its way inside the charging port of this speaker. When this happens it can prevent your speaker from being charged when you connect a charger to it. If you find any dirt or debris in the port then you can remove this using a toothpick or simply by blowing into it. Once the charging port of the speaker is free from debris try checking if you can charge it.
Method 3: Replace the charger to fix Tribit XSound Go not charging issue
There’s a possibility that the charger you are using to charge the speaker is defective. Some of the reasons why a charger won’t work is if its cord is damaged or if the adapter itself has a faulty circuit. Try using a different charging cord and wall charger to charge the speaker. If you have an Android phone with a micro USB charging port then you can try using its charger to charge the speaker.
Method 4: Defective battery
If the battery of the speaker is defective then you won’t be able to charge it. If this is the cause of the problem then replacing the battery will fix this. It’s recommended that you have this done at a service center.
Some reasons as to why a battery will get damaged is repeated overcharging or constant exposure to heat such as when you leave the speaker under the sun.
Method 5: Defective circuit board
The internal circuit of this speaker will get damaged if it gets in contact with water. If this is what’s causing the problem then you will need to have this fixed at a service center.
Having the Tribit XSound Go not charging issue can be a frustrating experience. Hopefully, this solution will help you fix the problem.
Visit our TheDroidGuy Youtube Channel for more troubleshooting videos.