How To Fix The Huawei Mate 20 Pro Black Screen of Death Issue
The #Huawei #Mate20Pro is a high-end Android smartphone model which was first released in the market last November 2018. It has a good build quality which is made of an Aluminum frame with glass on both the front and back. It uses a 6.39 inch OLED screen having a resolution of 1440 x 3120 pixels which is protected by Corning Gorilla Glass 5. It sports a triple rear camera system and a single 24MP selfie camera on the front. Under the hood, you will find the HiSilicon Kirin 980 octa core processor which is paired with 8GB of RAM. Although this is a solid performing device there are instances when certain issues can occur which we will be addressing today. In this latest installment of our troubleshooting series we will tackle the Huawei Mate 20 Pro Black Screen of Death issue.
If you own a Huawei Mate 20 Pro or any other Android device for that matter then feel free to contact us using this form. We will be more than happy to assist you with any concerns that you may have with your device. This is a free service we are offering with no strings attached. We however ask that when you do contact us try to be as detailed as possible so that an accurate assessment can be made and the correct solution can be given.
How To Fix The Huawei Mate 20 Pro Black Screen of Death Issue
The Black Screen of Death is a term given to a device whose screen is not working. When this problem occurs, nothing can be seen on the phone screen as it is just black, hence the term. The device might still be getting notifications, calls, or text messages when this issue occurs or it might not be functioning at all.
If this happened after you dropped your phone or had your device in contact with water then it’s very likely that this is caused by a damaged hardware component in which case you will need to have the phone repaired at a service center.
If this just happened randomly then there’s a possibility that it is caused by a software glitch. Listed below are the necessary troubleshooting steps that you need to do if this is a software related issue.
Fully charge the phone battery
What you will want to do first is to make sure that the problem is not caused by a drained battery. To eliminate this possibility you will have to make sure that the battery is fully charged by following the steps listed below.
- Clean the charging port of the phone using a can of compressed air making sure to remove any dirt or debris stuck in it.
- Fully charge the phone with a charging cord and wall charger that have been tested to work on another device.
- If the phone does not charge with a wall charger then try charging the device from a computer USB port.
Once the battery is fully charged check if the Huawei Mate 20 Pro Black Screen of Death issue still occurs.
Perform a soft reset
Your phone will usually store the most commonly used data to make it run better. This data however can get corrupted and can cause this problem. If this is what’s causing the problem then you will need to restart your phone as this will usually remove the temporary data stored in the phone.
- Press and hold the Power and Volume down key for up to 45 seconds.
- Wait as the device restarts.
Check if the Huawei Mate 20 Pro Black Screen of Death issue still occurs.
Start the phone in Safe Mode
There’s a chance that an app you downloaded from the Google Play Store can cause this particular issue. This can be due to bugs present in the app or due to compatibility issues between the app and your phone. To check if this is what’s causing the problem you will have to start the phone in Safe Mode as only the pre-installed apps are allowed to run in this mode.
- Power off the phone by holding down the power button for a few seconds.
- Press and hold the power button and release it when you see the Huawei logo on screen.
- After releasing the Power key, immediately press and hold the Volume down key.
- Keep holding the Volume key till the phone completely boots up.
- Once the phone boots up, “Safe mode” should appear on the bottom of the screen
If the screen works in this mode then the problem could be caused by an app you downloaded. Find out what app this is and uninstall it.
Wipe the cache partition of the phone
There are cases when the cached data stored in the dedicated partition of the phone can become corrupted. When this happens this will usually cause certain issues to occur on the phone. To eliminate the possibility that this is what’s causing the problem you will have to wipe the cache partition of the phone from the recovery mode.
- Turn off the device.
- Press and hold the Volume Up button.
- While holding the Volume Up button, connect USB charger to the phone.
- Within a few seconds, your phone will boot into the recovery mode.
- Now, remove the USB charger.
- Use volume buttons to highlight ‘wipe cache partition’ and use power key to select it
- Reboot the system once the process is completed
Check if the Huawei Mate 20 Pro Black Screen of Death issue still occurs.
Perform a factory reset
In case the above steps fails to fix the problem then you should try doing a factory reset in recovery mode. Take note that this will erase your phone data.
- Turn off the device.
- Press and hold the Volume Up button.
- While holding the Volume Up button, connect USB charger to the phone.
- Within a few seconds, your phone will boot into the recovery mode.
- Now, remove the USB charger.
- Use volume buttons to highlight select wipe cache/factory reset and use power key to select it
- Reboot the system once the process is completed
Check if the issue still persists. If it does then this might already be caused by a faulty hardware component. The best thing to do right now is to bring the phone to a service center and have it checked.