How To Fix A Honeywell Home Thermostat Offline (2026)

A Honeywell Home Wi-Fi thermostat that shows a strike-through Wi-Fi icon has lost its connection to your network.

Honeywell Home says the heating and cooling keep working while it is offline, so the job is getting the app link back.

This guide follows the official Honeywell Home support articles, from the quick power cycle to the Wi-Fi reset for each model family.

Quick answer

Start with the router, then the thermostat, and only reset Wi-Fi if both fail.

What you seeTry this first
Strike-through Wi-Fi icon or offline in the appCheck the router has power and is broadcasting, then power cycle it
Alert saying Wi-Fi Signal LostWait for reconnection, then check the router
Still offline after a router restartPower cycle the thermostat and prepare your phone
Cannot register on your home networkRegister through a phone hotspot, then run a Wi-Fi reset
Changed router or Wi-Fi nameReset Wi-Fi from the app

What offline means for your thermostat

Honeywell Home says the thermostat keeps running your heating and cooling during a Wi-Fi outage.

Shortcuts, geofencing and humidification levels are managed only through the app, so they stop until the connection returns.

You can still change the temperature on the thermostat itself, and it reconnects on its own once the network is back.

What keeps working and what stops

Honeywell Home’s compatibility article separates the two clearly.

FeatureWhile offline
Heating and coolingKeeps running
Changing the temperature on the thermostatStill works
Shortcuts, geofencing and humidification levelsStop, because only the app manages them
ReconnectingHappens automatically when the network returns

If you see a Wi-Fi Signal Lost alert

Honeywell Home says the thermostat may rejoin the network by itself, so give it a little time first.

  1. Wait for the thermostat to reconnect.
  2. Select a different network in the app configuration menu if you have one.
  3. If it still cannot reconnect, troubleshoot the router to find the cause.

Check and restart the router

Confirm the router has power and is broadcasting your home Wi-Fi network.

Power cycle the router using its manual, and expect the thermostat to reconnect once the network is restored.

Our router troubleshooting guide covers the router side.

Power cycle the thermostat

Honeywell Home’s offline article says to remove the thermostat from the wall for 30 seconds and then reattach the faceplate.

For the TH/RTH6000 and TH8320/RTH8000, the article says to wait at least one minute before reattaching it.

Restart the router with the thermostat off the wall

If a TH/RTH6000 or TH8320/RTH8000 did not reconnect, the order of these steps matters according to Honeywell Home.

  1. Take the thermostat off the wall.
  2. Turn off the router and wait one minute.
  3. Turn the router back on.
  4. Put the thermostat back on the wall.

Prepare your phone

A phone that is not set up correctly can block registration.

  • Turn off mobile data, connect to your home Wi-Fi and forget other Wi-Fi networks in range, or use Airplane mode.
  • Some Android phones block connections to unsecured Wi-Fi, which you can disable under Settings > Network & Internet > Wi-Fi > Wi-Fi Preferences.

Register through a phone hotspot

Honeywell Home says a mobile hotspot gets around network security that may be blocking registration.

After it registers successfully, run a Wi-Fi reset to move the thermostat to your home Wi-Fi.

Network settings Honeywell Home requires

If the steps above fail, the support article says your internet provider may need to verify or change some settings.

SettingRequirement
BandDedicated 2.4 GHz network with its own name; only the T9 and T10 can use 5 GHz
Signal pathConnect directly to the router; boosters, satellites and extenders are not recommended
Network typeEnterprise, guest and web-login networks are not supported
SecurityWPA2-AES recommended
AddressingDHCP enabled; static IP networks are not supported
UPnP and P2PShould be on
Band steeringTurn it off

Our post on whether 2.4GHz and 5GHz should be one network or two explains the shared-name issue.

Not supported versus incompatible

Honeywell Home separates networks it cannot support from networks the thermostat cannot talk to at all.

A not supported network may still work, but customer care cannot help with it, while an incompatible network will not work.

Which Wi-Fi reset fits your model

The right reset depends on the family, and the articles do not mix them.

ModelReset methodNeeds
T5, T5+ and T6 ProReset WiFi in the Resideo app, or Add a New DeviceThe app and your account
TH/RTH6000 and TH8320/RTH8000Setup-mode reset with functions 38 and 39A phone or laptop to reach the setup page
Any model that cannot register on your networkRegister through a phone hotspot, then reset Wi-FiA phone that can create a hotspot

Honeywell Home also says that if the thermostat was connected before and you have not changed your network or router, you should try other steps before a full reset.

Reset Wi-Fi from the app on a T5, T5+ or T6 Pro

Honeywell Home gives two methods for these models.

  1. Log in to the Resideo app and select the thermostat.
  2. Tap the settings icon in the top-right corner.
  3. Scroll to the bottom and choose Reset WiFi.
  4. Follow the prompts to reconnect, or to join a different network.

If the thermostat is gone from your account or you cannot find Reset WiFi, tap Add a New Device or the plus button and follow the prompts.

Reset Wi-Fi from the menu on a TH/RTH6000 or TH8320/RTH8000

If a power cycle and router restart did not work, these models have a setup-mode reset.

  1. Press and hold More, or hold Fan and Up until two sets of numbers appear.
  2. Confirm function 38 (or 890) is set to 1.
  3. Change function 39 (or 0900) to 0, and the screen flashes WiFi setup.
  4. On a phone or laptop, join the network named NewThermostat_123456; the last six digits may differ.
  5. Open the Thermostat WiFi Setup page, or go to 192.168.1.1 in a browser if it does not open.
  6. Pick your home Wi-Fi network and wait up to three minutes for the status.

When to contact Honeywell Home support

Technical Support is 1-800-633-3991, Monday to Friday 9am to 8pm CT and Saturday and Sunday 9am to 5:30pm CT.

Contractors can call the same number and choose the Contractor option.

If the screen is dark instead of offline, see our Honeywell Home thermostat blank display fix.

Sources: Honeywell Home offline thermostat article, TH/RTH6000 and TH8320 Wi-Fi article and T5 and T6 Pro Wi-Fi reset article.

Leave a Reply

Your email address will not be published. Required fields are marked *