How To Turn Off Vibration And Adaptive Triggers In GTA 6 (2026)
The controller buzzes and the triggers push back every time you shoot or drive in GTA 6.
You can turn most of it off, either inside the game or in your console settings.
This guide covers the DualSense options on PS5, the system-level intensity settings and the vibration switch on Xbox.
Quick answer: how to turn off vibration and triggers
| Goal | Where (as of November 21, 2026) |
|---|---|
| Stop trigger resistance | Settings, Controller tab, DualSense features, turn off Adaptive Triggers Resistance |
| Stop trigger rumble | Same group, turn off Adaptive Triggers Vibration |
| Lower general rumble | Vibration and Haptics Strength slider |
| Xbox rumble | Profile and system, Settings, Accessibility, Controller, Vibration settings |
What GTA 6 does with the DualSense
A third-party guide says a June 2026 PlayStation Blog post from Rockstar and Sony confirmed haptics and adaptive triggers on PS5.
The same guide says Xbox pads lack adaptive trigger hardware, and Xbox cloud gaming and Windows are separate cases.
In-game option names below come from outlets rather than Rockstar documentation, so labels may shift after updates.
Step 1: Open the Controller tab
- Pause the game and open Settings.
- Press R1 once to move from Control Scheme to the Controller tab.
- Scroll down to the DualSense Wireless Controller Features group.
Two outlets give this same path, and a third confirms the group name and options.
Step 2: Turn off the adaptive triggers
- Set Adaptive Triggers Resistance to Off, which removes the simulated push on L2 and R2.
- Set Adaptive Triggers Vibration to Off, which stops the trigger rumble during shooting and driving.
All Things How reports both are on by default.
Adaptive Speed Limiter is a separate toggle that caps vehicle speed while you hold R2 at its resistance point, so leave it alone unless you want it off too.
Step 3: Lower the vibration strength
Use the Vibration and Haptics Strength slider in the same group to reduce general rumble.
One guide reports it defaults to 10, the top of the slider, so a lower number softens everything.
Another guide describes it only as a slider, and I could not confirm whether the lowest value fully disables vibration.
Should you turn off both trigger settings?
You do not have to, because the two toggles are independent and each controls a different effect on L2 and R2.
One guide suggests switching both off if the triggers feel stiff during long sessions, which is a comfort choice rather than a fix.
Try resistance alone first, play a few minutes, and then decide whether the trigger rumble also bothers you.
Step 4: Change vibration and trigger intensity on PS5
- Open Settings on the PS5.
- Go to Accessories, then Controller (General).
- Adjust Vibration Intensity and Trigger Effect Intensity.
Sony says Trigger Effect Intensity appears in games that support adaptive triggers, and that a DualSense Edge can hold separate values for each profile.
One third-party guide claims the options include Off, but Sony’s page does not list the choices, so check what your console shows.
Step 5: Turn off vibration on Xbox
- Press the Xbox button to open the guide.
- Select Profile and system, then Settings.
- Choose Accessibility, then Controller, then Vibration settings.
- Pick your controller and select Configure.
- On a standard Xbox Wireless Controller, switch vibration off.
Microsoft says an Elite Series 2 controller instead uses profile sliders under Edit, then Vibration.
For Xbox cloud gaming in a browser, Microsoft lists a separate switch under Settings, Input, Controller vibration, and notes vibration is unsupported on Android, iPadOS and iOS.
PS5 versus Xbox at a glance
| Feature | PS5 | Xbox Series X|S |
|---|---|---|
| In-game options | Reported in the Controller tab | Not described by the outlets I read |
| System setting | Vibration Intensity, Trigger Effect Intensity | Vibration settings under Accessibility |
| Adaptive triggers | DualSense feature | Not reported for Xbox pads |
Do system settings override the game?
Sony describes its intensity settings as controller-wide, and one outlet says an Off value there blocks every game, though I did not verify that in GTA 6.
That means you could leave the in-game sliders alone and use the console setting if you want one change for everything.
If you prefer per-game control, keep the console setting normal and use the in-game toggles instead.
What if the controller still vibrates?
Check that you changed the correct controller, since Xbox asks you to pick one when several are connected.
Square resets a selected row to default and Triangle resets the whole Controller tab, so avoid those buttons by accident.
For weak or missing rumble problems rather than too much, see our guide to controller not working or drifting, and the broader change controls guide for button layouts.
When to contact PlayStation, Xbox or Rockstar support
Contact PlayStation or Xbox support if a vibration setting will not save or the controller rumbles with the option set to off.
Contact Rockstar if the in-game DualSense group is missing entirely from the Controller tab.
Official sources: PlayStation general controller settings, Xbox: change controller vibration.