How To Install Gigabyte Control Center And Update Center (2026)
Gigabyte Control Center, also called GCC, is the company’s one app for fan control, RGB lighting and driver updates.
It only runs on supported Gigabyte products, so the first job is to check that your hardware qualifies.
This guide uses Gigabyte’s own GCC page, its motherboard manual and its quick start guide.
Quick answer: how to install Gigabyte Control Center
| Step | What to do |
|---|---|
| 1 | Confirm a supported Gigabyte board, graphics card or laptop is installed. |
| 2 | Connect to the internet and turn off any VPN. |
| 3 | Download GCC from Gigabyte’s GCC page or your product’s Utility section. |
| 4 | Accept the End User License Agreement and install. |
| 5 | Open Update Center and install the drivers and apps you want. |
Which products GCC supports
Gigabyte says the application only runs on supported products, so install the product before you download GCC.
| Product type | Series named on Gigabyte’s page |
|---|---|
| Intel motherboards | Z890, Z790, Z690, B860, B760 and B660 |
| AMD motherboards | X870, X670, B850, B650, B550 and A520 |
| NVIDIA graphics cards | GeForce RTX 50, 40, 30 and 20 Series, and GTX 1660 Series |
| AMD graphics cards | Radeon RX 9000, 7000, 6000 and 5000 Series |
| Laptops | Intel 14th, 13th and 12th Gen Series |
The page links to a longer support list, so check it if your exact model is not in the table.
Windows versions
GCC runs on Windows 10 and Windows 11.
Gigabyte recommends Windows 11 for better compatibility.
Where to download GCC
- The GIGABYTE Control Center page on gigabyte.com.
- The Utility section of your supported product’s page.
- The Support section of the Gigabyte site.
Install from the pop-up after a fresh Windows install
Gigabyte’s motherboard manual describes a second route that starts right after you install the operating system.
- Connect the computer to the internet.
- Wait for the dialog in the bottom-right corner of the desktop that asks about downloading drivers and Gigabyte applications through GCC.
- Click Install.
- Click Accept when the End User License Agreement appears.
- On the GIGABYTE CONTROL CENTER screen, tick the drivers and applications you want.
- Click Install.
If the install dialog never appears
The manual says to enable the downloader in the BIOS.
The path it gives is Settings, then Gigabyte Utilities Downloader Configuration, then Gigabyte Utilities Downloader, which should be set to Enabled.
Menu names can differ by board, so use your own board’s manual if the option looks different.
If the installation fails
Gigabyte gives a four-point checklist for failed installs.
| Check | Why it matters |
|---|---|
| Your products are supported by GCC | GCC only runs on supported products. |
| Stable internet, no VPN | GCC downloads its parts online. |
| Antivirus or optimizer software is not blocking GCC processes | Security tools can interrupt the install. |
| Virtual platforms such as Android emulators are closed | Gigabyte lists this as a condition during installation. |
If it still fails after those checks, Gigabyte says to contact its customer service through e-Support.
Open GCC after installing
- In Desktop mode, click the GCC icon in the notification area.
- If GCC is closed, open it from the GCC icon under All apps in the Start menu.
- Pick an app on the main menu to run it.
Use Update Center to update drivers and apps
Update Center connects to Gigabyte’s servers to download drivers and software for your products.
Gigabyte says it checks regularly for BIOS, firmware, driver and software updates.
Updates are installed only with your consent, and the release notes or details button shows version information.
On the main menu you can also click the Update center icon to update an app online.
What the main GCC pages show
| Page | What it does |
|---|---|
| Home | Lists detected, configurable products and quick-link buttons. |
| Device | Lists configurable products by function, with tabs such as RGB Fusion, FAN Control and Sidekick for monitors. |
| Update Center | Shows detected versions and available updates, which you install from the same page. |
Laptop features in GCC
Gigabyte’s quick start guide describes extra pages that appear on supported laptops.
| Feature | What it does |
|---|---|
| Dashboard | Shows the CPU and GPU model, usage and temperature, storage health, battery capacity, power plan and fan status. |
| Fan Control | Sets the power mode to Energy Saving, Normal, Turbo or Customized. |
| General AI | Offers an AI Boost toggle and scenarios such as Creator, Turbo, Game and Meeting. |
| File Drop | Transfers files to another computer on the same network that also has GCC installed. |
| USB recovery drive | Creates a recovery drive using Gigabyte’s Smart USB backup technology. |
Which pages you see depends on your product, since GCC lists only the features your hardware supports.
RGB Fusion inside GCC
RGB Fusion in GCC is installed through Update Center when supported components are detected.
The older RGB Fusion 2 runs on its own, and both can run at the same time.
If both control the same effects, the last adjustment you make takes effect.
Remove older Gigabyte software first
If your product supports both GCC and older Gigabyte software, Gigabyte recommends uninstalling the older software and installing only GCC to avoid errors.
Gigabyte’s GCC page does not give uninstall steps for GCC itself.
A 2023 memory protection update
In a December 13, 2023 press release, Gigabyte said it had received reports of unexpected behavior with certain memory modules and GCC.
It said some DDR modules did not comply with JEDEC specifications, which made SPD write protection fail.
A motherboard BIOS update enabled SPD write protection, and a GCC update, version rev.23.12.06.01 at that time, strengthened SPD protection.
Always download the current build from Gigabyte’s page and not an old copy.
Official sources
- Gigabyte: GIGABYTE Control Center
- Gigabyte: motherboard manual, GCC and driver installation
- Gigabyte: GCC software update press release