|

How To Turn On Dynamic Lock In Windows 11 (2026)

Dynamic lock is a Windows 11 setting that locks your PC when the phone paired with it moves away.

It only needs Bluetooth, so there is no camera or extra hardware to buy.

This guide shows how to pair the phone, switch the setting on, and what to check when the PC does not lock.

Quick answer: turn on Dynamic lock

StepWhat to do
1Pair your phone with the PC over Bluetooth
2Open Start > Settings > Accounts > Sign-in options
3Scroll to Additional settings and find Dynamic lock
4Tick the box that lets Windows lock the device when you are away
5Walk away with the phone and check that the PC locks

Microsoft also gives the shortcut ms-settings:signinoptions, which opens the same Sign-in options page.

What Dynamic lock does

Microsoft says Windows locks the device when the Bluetooth signal of the paired phone drops below a set level.

Its support page adds that the PC locks within a minute after you move out of Bluetooth range.

Microsoft Learn says the lock only happens if the signal falls and the PC is idle.

Learn also calls it an extra barrier, not a replacement for locking the PC yourself.

What you need before you start

  • A Windows 11 PC with Bluetooth, which Microsoft says most PCs have built in, or a USB Bluetooth adapter.
  • A phone, because Microsoft Learn says Phone is the only supported device type.
  • The phone paired with the PC before you turn the setting on.

Pair your phone with the PC

  1. Open Start, select Settings, then Bluetooth & devices, and make sure the Bluetooth switch is on.
  2. Turn on Bluetooth on the phone and make it discoverable, which depends on the phone.
  3. Select the Network, Sound or Battery icon on the taskbar.
  4. Select the arrow next to the Bluetooth tile, then pick your phone under New devices.
  5. Follow any prompts on both screens, then select Done.

Microsoft says paired devices reconnect on their own when Bluetooth is on and they are in range.

If the phone is missing from the list, scroll through Your devices, because New devices may sit lower on the page.

Our guide to turning on Bluetooth and pairing a device in Windows 11 covers the same steps in more detail.

Turn on Dynamic lock in Settings

  1. Open Settings and select Accounts.
  2. Select Sign-in options.
  3. Scroll down to Additional settings.
  4. Select Dynamic lock.
  5. Tick the box that lets Windows automatically lock your device when you are away.

Windows Report and AllThings.how both name that checkbox as allowing Windows to lock the device when you are away.

Microsoft warns that the setting can vary by device configuration, so it may look different on your PC.

Check that it works

  1. Keep the paired phone in your pocket.
  2. Walk out of Bluetooth range of the PC.
  3. Wait up to a minute.
  4. Look at the PC screen to confirm it shows the lock screen.

Windows Report suggests this same walk-away test.

Microsoft does not give the Bluetooth range or the signal threshold on its support page.

What Dynamic lock will not do

LimitSource detail
It needs the phone to move awayThe lock follows the Bluetooth signal, so it will not lock a PC if the phone stays beside it
It waits for idleMicrosoft Learn says the PC does not lock if it is not idle when the signal drops
It does not replace lockingLearn calls it an additional barrier, not a substitute for locking the PC
Range variesLearn says signal readings are relative and differ by environment, so results can vary
Only phones countLearn lists Phone as the only currently supported device class

Why the PC may not lock

CauseWhat to try
The box is not tickedGo back to Settings > Accounts > Sign-in options and tick it
The phone is not pairedPair the phone again from Bluetooth & devices
Bluetooth is offTurn the Bluetooth switch on in Settings > Bluetooth & devices
The phone stayed in rangeMove farther away and wait up to a minute
The Bluetooth driver is faultyInstall Windows updates, then restart the PC

If Dynamic lock is greyed out

A Microsoft Q&A thread describes the box greyed out with the message that the option is managed by your organization.

That points to a policy set on a work or school PC, so ask the IT administrator instead of trying to override it.

The thread shows two different policy names and no accepted answer, so we do not name one here.

Fix Bluetooth connection problems

Microsoft lists these fixes, in order, for a device that will not connect.

  1. Run the Bluetooth troubleshooter in the Get Help app.
  2. Turn Bluetooth on in Settings > Bluetooth & devices, and keep the phone close.
  3. Select More options (…) > Remove device, then select Add device to pair again.
  4. Charge the phone, then pair again.
  5. Turn Bluetooth off, wait 10 seconds and turn it on.
  6. Check for updates in Settings > Windows Update.
  7. Restart the PC.

AllThings.how reports that Dynamic lock can fail when Phone Link starts at sign-in.

Its suggested test is to open Phone Link > Settings > General, turn off starting Phone Link when you sign in, and restart.

That is a user-reported fix, not a Microsoft instruction, so treat it as something to try rather than a guarantee.

Presence sensing is a different feature

Some Windows 11 PCs have a presence sensor that can react when you leave, and it needs no phone.

ItemDynamic lockPresence sensing
Detects you withA paired Bluetooth phoneA built-in or connected presence sensor
WhereSettings > Accounts > Sign-in optionsSettings > System > Power & battery > Screen and sleep
Locks the PCYes, when the phone moves awayOnly as an option when an external display is connected

To control how soon Windows asks for a sign-in after sleep, read how to change when Windows 11 asks you to sign in.

If face or fingerprint sign-in stops working, see fixing Windows Hello face or fingerprint.

Microsoft sources: Sign-in options in Windows, Dynamic lock on Microsoft Learn and Troubleshoot Bluetooth not connecting.

Leave a Reply

Your email address will not be published. Required fields are marked *