|

How To Fix Apple Watch Showing The Wrong Time After Daylight Saving (2026)

Updated November 21, 2026: MacRumors reported on October 26 that several Apple Watch owners in the UK and central Europe saw the wrong hour after the clocks went back, and Apple published its own support document on November 1.

The problem is narrow: the Always On display shows a time that is one hour off while your wrist is down, but the correct time appears as soon as you raise your wrist or tap the screen.

This guide explains how to recognize the problem, what Apple says about it, and the fixes in order from easiest to most involved.

Quick answer: wrong hour on the Always On display

What you seeLikely causeFix
Watch face an hour off with the wrist downDaylight saving bug on the Always On display, confirmed by AppleSwitch watch faces, then switch back
Correct time after a tap or wrist raiseOnly the dimmed display is wrongRestart the watch if the face switch does not help
Nothing changes by itselfApple says the glitch clears on its ownWait until midnight after the time change
Alarms ring at the right timeAlarms are not affected, per AppleNo action needed for alarms

What users reported

Reports so far: MacRumors said on October 26, 2026 that five people on its forums described the problem after the UK and Europe set their clocks back on October 25.

Those owners said the Always On display kept showing summer time, one hour ahead, while the watch showed the right time once activated.

The report ties the problem to watchOS 27 but says it is unclear which versions or watch models are affected.

For most of the United States, clocks went back on Sunday, November 1, 2026, the same day Apple published its support document.

What Apple says

Apple has acknowledged it: its support document says the incorrect time appears only on the Always On display when your wrist is down.

Apple says alarms and other Apple Watch features are not affected.

The document does not announce a software fix, so no update is confirmed to cure it as of today.

It does recommend keeping your watch updated for the latest bug fixes and security updates.

Confirm it is this problem

Quick test: compare the time shown with your wrist down against the time after you raise your wrist or tap the display.

  1. Let the watch screen dim with your wrist down.
  2. Look at the time on the dimmed face.
  3. Tap the display or raise your wrist.
  4. If the second time is correct and the first is off by an hour, you have the issue Apple describes.

If the time is wrong even after waking the screen, this is a different problem and the steps below may not apply.

Fix 1: do nothing and wait until midnight

Apple says that if you do nothing, the problem resolves itself at midnight following the time change.

This is the lowest-effort option and safe, since nothing on the watch changes.

If the wrong hour still appears after midnight, move on to the next fix.

Fix 2: switch to another watch face and back

This is the first fix Apple lists.

  1. With the current watch face showing, touch and hold the display.
  2. Swipe to a different face, then tap it.
  3. Touch and hold the display again.
  4. Swipe back to your usual face and tap it.

Apple’s guide also notes that you can turn on Swipe to Switch Watch Face in Settings > Clock to move between faces by swiping.

Fix 3: restart the Apple Watch

Restarting is the second fix in Apple’s document, and three people on the MacRumors forum said it cleared the problem.

  1. Hold the side button until the power sliders appear.
  2. Tap the Power icon, then drag the Power Off slider to the right.
  3. Keep holding the side button until the Apple logo appears.

You cannot restart the watch while it is charging, so take it off the charger first.

Fix 4: force restart if it will not power off

Apple says to use a force restart only if you cannot power off the watch normally or the problem continues.

  1. Hold the side button and the Digital Crown together.
  2. Keep holding for at least 10 seconds, until the Apple logo appears.

A force restart does not erase anything on the watch.

Fix 5: update watchOS

Apple recommends staying current, even though it has not tied this glitch to a specific update.

On your iPhone:

  1. Open the Apple Watch app.
  2. Tap My Watch, then go to General > Software Update.
  3. If an update is available, tap Download and Install.

On the watch: open Settings, tap General, then tap Software Update.

Things to know about the Always On display

  • You find the setting under Settings > Display & Brightness > Always On on the watch.
  • Always On is not available in Low Power Mode, so the face stays dark until you tap the display.
  • If the screen is fully dark, you are not seeing this bug, because the problem is a wrong hour on a dimmed face.
FixWhereErases data?
Wait until midnightNowhere, no actionNo
Switch watch face and backTouch and hold the faceNo
RestartSide button, Power Off sliderNo
Force restartSide button plus Digital Crown, 10 secondsNo
Software updateWatch app > My Watch > General > Software UpdateNo

Will an update fix it for good?

Apple has not said so, and its support document describes only the two workarounds and the midnight self-correction.

A report from TechBetweenTheLines says the watchOS 27.2.1 release notes of November 9 do not mention the time display, so do not expect that update to be a cure.

If the glitch returns at the next time change, the same two steps should be your first move.

When to contact Apple Support

  • The time is wrong even when you tap the display or raise your wrist.
  • The wrong hour is still there after midnight, a face switch and a restart.
  • Alarms or other features also fail, which Apple says this issue should not cause.
  • The watch will not restart or update.

Sources: Apple Support: If your Apple Watch shows the wrong time after daylight saving time changes, Apple: Restart Apple Watch, Apple: Change Apple Watch faces, Apple: Update Apple Watch software, MacRumors report, October 26, MacRumors, November 1, TechBetweenTheLines.

Leave a Reply

Your email address will not be published. Required fields are marked *