How To Fix Android Auto Not Connecting Or Not Working (2026)
Android Auto fails to connect when the phone, the cable, the car or the saved car list is the weak link.
The car screen then stays on its normal menu, says no device is found, or the phone only charges.
This guide follows Google’s Android Auto Help pages, and every step below comes from them.
Quick answer: what to check first
| Symptom | Likely cause | First thing to try |
|---|---|---|
| Phone only charges, car shows nothing | Cable or car port | Swap in a short, certified cable |
| Worked before, stopped today | Worn cable | Replace the cable |
| Car does not offer Android Auto | Feature off or car not compatible | Turn it on in the infotainment settings |
| Phone connects to an old car instead | Saved car list | Use Forget all cars, then plug in again |
| Wireless never starts after Bluetooth pairing | Phone or car lacks wireless support | Check 5 GHz Wi-Fi support and car compatibility |
Menu names can differ a little between phone brands, so follow the closest wording on your screen.
Check the phone requirements
Google says a wired connection needs an Android phone running Android 11.0 or later with an active data plan.
Android Auto is built into the phone, so you do not install a separate app from the Play Store.
Google also states that Android Auto is not available on devices that run Android (Go edition).
Most features will not work outside the countries on Google’s list, which includes the United States, Canada, the United Kingdom, Australia, Japan and Taiwan.
Your phone also needs mobile service, shown by signal bars, before you start.
Confirm the car supports Android Auto
Google says your car must support Android Auto or have a compatible aftermarket unit, and a USB port alone is not enough.
Check Google’s Android Auto compatibility page, or ask your dealer or vehicle manufacturer if you are unsure.
For wireless use, confirm that your specific car model supports wireless Android Auto, because that is a separate feature.
Fix the USB cable first
Google says some cables do not work with some cars, and replacing the cable often fixes a connection that used to work.
| Cable rule from Google | What to do |
|---|---|
| Length | Use a cable under 3 feet (1 meter) |
| Hubs and extensions | Avoid them |
| Best first choice | The cable that came with your phone |
| Third-party cable | Pick one that meets USB Implementers Forum standards |
| Certification check | Search the USB.org products page by brand or model, certified within the past two years |
If your cable is long or has no certification, try a short certified one before changing anything else.
Run the wired setup correctly
These are the steps from Google’s Set up Android Auto page.
- Park the car in P with the infotainment system on.
- Plug one end of the USB cable into the car’s USB port and the other into your phone.
- Follow the on-screen setup on the phone and the car screen.
- Accept the prompt if the phone asks you to update Android Auto.
Google tells you to allow time for the first setup before you drive.
Check the car or receiver
Google lists three checks on the car side.
- Setting: confirm Android Auto is turned on in the car’s infotainment system.
- Restart: restart the infotainment system.
- Aftermarket unit: on a Pioneer, Kenwood or similar receiver, check the maker’s website for a firmware update.
Your vehicle manual or manufacturer has the exact menu names for turning the feature on.
Forget saved cars and start fresh
Google gives this reset for when you switch between cars, and it is also a clean restart for a bad saved connection.
- Unplug your phone from the car.
- Open Settings, then go to Connected devices, Connection preferences, Android Auto, Previously connected cars.
- Tap the menu icon in the top right corner.
- Tap Forget all cars.
- Plug the phone into the car again.
If you use wireless Android Auto
Google says wireless needs a compatible phone with an active data plan and 5 GHz Wi-Fi support.
Any phone running Android 11.0 is compatible with wireless projection, but it must still support 5 GHz Wi-Fi.
The wireless pairing steps below come from Google’s setup page.
- On your phone, open Settings and go to Bluetooth.
- On the steering wheel, press and hold the voice command button to open the pairing menu for a new phone.
- Follow the on-screen steps to pair the phone with the car over Bluetooth.
- Accept the prompt if the phone asks you to update Android Auto.
Google recommends keeping Bluetooth, Wi-Fi and Location Services turned on during setup.
After pairing, Android Auto should start within a few seconds, and if it does not you may need to tap the Android Auto icon on the car display.
If no pairing menu appears, check your car manufacturer’s instructions.
If you have a car with no wireless support, see our guide to using Android Auto wirelessly in a wired-only car.
EU phones and 5 GHz
Google notes that in the EU a smartphone must meet extra regulatory requirements to use 5 GHz Wi-Fi in a car.
It says Google Pixel 3 and newer models meet this requirement.
To confirm 5 GHz Wi-Fi support on any other phone, contact the phone’s manufacturer.
Best order to try the fixes
| Step | Action | Source |
|---|---|---|
| 1 | Confirm Android 11.0 or later, mobile service and a supported country | Google requirements page |
| 2 | Confirm the car supports Android Auto | Google compatibility page |
| 3 | Replace the cable with a short, certified one | Google troubleshooting page |
| 4 | Turn Android Auto on and restart the car system | Google troubleshooting page |
| 5 | Forget all cars and reconnect | Google troubleshooting page |
| 6 | Update receiver firmware if it is aftermarket | Google troubleshooting page |
If a connection works for a while and then drops, use our guide on Android Auto that keeps disconnecting.
If your phone will not pair over Bluetooth at all, see how to fix Bluetooth not connecting on Android.
For the voice assistant on the car screen, read why Android Auto now uses Gemini.
When to ask for more help
Google’s page says to post in the Android Auto Help community if the fixes do not work.
For car-specific menus and compatibility questions, Google’s setup page says to contact your vehicle manufacturer.