How To Fix AMD Graphics Driver Writing To Your SSD (2026)
Some Radeon owners found the AMD graphics driver writing to their SSD constantly, even while the PC sat idle.
AMD has acknowledged the problem and shipped fixes, so this is fixable with a driver update.
This guide explains what was reported, how to check your own PC, and how to update or roll back, in about 15 minutes.
Quick answer: what to do about AMD driver SSD writes
| What you see | Likely cause | What to try |
|---|---|---|
| atieclxx.exe writing to disk while idle | The AMD External Events Utility in the Radeon driver | Update to Adrenalin 26.11.1 or newer |
| RX 5000 or RX 6000 card on Windows 10 | Covered later than newer cards | Adrenalin 26.11.2 WHQL |
| Update causes a new game problem | Known issues in the new release | Roll back in Device Manager |
What was reported?
Outlets reported that a Radeon background process, atieclxx.exe, was writing to the system drive at idle.
TechPowerUp cited user figures from 0.3 MB/s to 5 MB/s, which would add up to roughly 26 GB to 432 GB a day if it never stopped.
Tom’s Hardware had earlier covered a related report of log writes to an EEUDumps folder whenever windows were moved or resized.
Which Adrenalin versions are affected?
TechPowerUp named Adrenalin 26.10.1 and 26.10.2, but AMD’s own support article does not list affected driver versions.
AMD says the issue applies to Radeon RX 7000 and RX 9000 series cards, and one outlet noted it did not appear on every system.
Treat the version list as reported, not confirmed by AMD.
Did AMD fix it?
As of November 21, 2026, AMD lists the issue as resolved and points to Adrenalin 26.11.1.
| Driver | Date | What AMD lists |
|---|---|---|
| 26.11.1 Optional | November 12, 2026 | Fixes idle writes on RX 7000 and newer, plus writes when moving or resizing windows |
| 26.11.2 WHQL | About November 18 to 19, 2026 | Fixes idle writes on RX 5000 and RX 6000 on Windows 10 |
Our guide to the NVIDIA version of this SSD write bug covers the green-team side.
Step 1: Check Resource Monitor
Close your games and leave the PC idle for a few minutes first.
- Search the Start menu for Resource Monitor and open it.
- Click the Disk tab.
- In Processes with Disk Activity, look for atieclxx.exe and read its write speed in bytes per second.
Task Manager’s Disk column works too, and our Task Manager usage guide shows where to look.
Step 2: Confirm your driver version
Right-click Start, open Device Manager and expand Display adapters.
Right-click your Radeon entry, choose Properties and open the Driver tab to read the version and date.
AMD’s release notes list 26.20.15.16 as the Windows driver version for 26.11.1, so you can compare it there.
Step 3: Update to a fixed driver
Download the driver from AMD’s driver pages and run the installer, choosing Express Install for default components.
- RX 7000 or newer: 26.11.1 or the newer 26.11.2 both carry the fix.
- RX 5000 or RX 6000 on Windows 10: choose 26.11.2.
- RX 6000 and Crimson Desert: AMD says the game may not launch on 26.11.2, so it suggests 26.11.1 instead.
AMD also lists that Smart Access Memory may turn off after installing on Windows 10, so check it afterward.
Step 4: Use AMD’s Clean Install option
AMD’s install page says to remove any existing graphics driver before installing a new package.
Choose Custom Install, then the Clean Install option, which removes detected Radeon software and AMD drivers and forces a reboot.
Warning: Save your work first, because the PC restarts and the installation continues on its own afterward.
AMD also offers a Cleanup Utility that creates a restore point and recommends safe mode, but it leaves chipset drivers alone.
Step 5: Roll back if the new driver misbehaves
Microsoft’s method works for Radeon cards the same way as for any display driver.
- Open Device Manager and expand Display adapters.
- Right-click your Radeon card, choose Properties, then the Driver tab.
- Click Roll Back Driver and confirm with Yes.
The button only works if Windows kept an earlier version, as explained in our driver rollback guide.
Should you switch off the External Events Utility?
Before the fix, reports said disabling that service stopped the writes, but it reportedly disrupted FreeSync and hotkeys.
AMD’s support article lists no workaround and says to update instead, so this is no longer worth the side effects.
If you did disable it, turn it back on in Services after updating.
How do you know the fix worked?
Restart the PC, wait a few minutes at the desktop and repeat the Resource Monitor check.
If atieclxx.exe no longer shows steady writes, the update did its job.
One commenter in the coverage said the process still wrote constantly after the update, which is an unverified single report.
When to contact AMD support
Contact AMD if writes continue on 26.11.2 or if the installer fails after a clean install.
AMD has not quantified wear, and the coverage cites no confirmed drive failures from this bug.
Official sources: AMD SSD write issue FAQ, Adrenalin 26.11.1 release notes, Adrenalin 26.11.2 release notes, AMD install guide.