Solving the Tribit StormBox Micro II Not Turning On Problem Once and For All

Why is my Tribit StormBox Micro 2 Bluetooth speaker not working?

Is your Tribit StormBox Micro II portable Bluetooth speaker not turning on? This could be caused by a software glitch, bad battery, faulty charging cable, or a defective charger. To fix this you will need to perform a series of troubleshooting steps.

The Tribit StormBox Micro II is one of the latest compact and portable Bluetooth speaker models designed for people who enjoy music on-the-go. It is a water-resistant little speaker that offers an impressive audio quality and a long battery life. Its main advantage is that it is easy to take with you anywhere you go, whether it’s a picnic, a camping trip, or just a relaxing day in the park.

Technical Specifications:

  • Connectivity Range: 120FT
  • Output power: 10W
  • Battery type & capacity: 3.6V/4700mAh
  • System frequency response: 70Hz-20kHz
  • Dimensions: 99.8mm*99.8mm*42.9mm
  • Weight: 315g
  • Voice Assistant integration: Support both Apple and Android

Why is my Tribit StormBox Micro 2 Bluetooth speaker not working?

One of the issues that you might experience with your Tribit StormBox Micro 2 Bluetooth speaker is when it does not turn on. This can be an annoying experience especially if you are about to use it to listen to your favorite music.

Here’s what you need to do to fix this Tribit StormBox Micro 2 not turning on issue.

Solution 1: Press the power button of your Tribit StormBox Micro 2

The first troubleshooting step you should try when your Tribit speaker is off is to press and hold for a second the power button. If all goes well then your Tribit StormBox Micro 2 should turn on. If it doesn’t then proceed to the next step.

Solution 2: Charge your Tribit StormBox Micro 2 battery

One of the factors that can cause this power issue on your Tribit StormBox Micro 2 speaker is because its battery life is drained. You should make sure that the built-in battery of your speaker is fully charged then check if this will fix the problem.

Charging Tribit StormBox Micro 2

Connect one end of the USB-C cable to a power source, such as a wall adapter or a computer.

Connect the other end of the cable to the USB-C port on the speaker. The speaker will begin charging immediately.

Check the battery level: You can check the battery level on the speaker’s LED indicator. When the LED is red, the battery is low and needs to be charged. When the LED is blue, the battery is fully charged.

Wait for the battery to fully charge: It should take about 2-3 hours to fully charge the Tribit Stormbox Micro II.

Disconnect the cable: Once the speaker is fully charged, disconnect the cable from both the speaker and the power source.

Solution 3: Factory reset your Tribit Stormbox Micro 2

Performing a hard reset or factory reset will erase the data and settings done on the speaker and bring it back to its default settings. This is a useful troubleshooting step when experiencing problems caused by faulty configuration settings.

How to factory reset Tribit StormBox Micro 2

Press and hold the Power button for at least 8 seconds.

Solution 4: Bring your Tribit Stormbox Micro 2 speaker to a service center

There are instances when your speaker will not turn on because of hardware issues. The possible causes are as follows:

Dead battery.

Faulty circuit board caused by a short circuit.

Damaged charging port.

If the problem is hardware related then you will need to have this fixed at the nearest service center.

Frequently Asked Questions

  1. <strong>Is the Tribit StormBox Micro II waterproof?</strong>

    Yes, the Tribit StormBox Micro II has an IP67 rating, which means it is water-resistant and can be used in various wet environments, such as rain or near a pool. However, it is not completely waterproof and should not be submerged in water.

  2. <strong>Can the Tribit StormBox Micro II be paired with other Bluetooth speakers for a stereo sound?</strong>

    Yes, the Tribit StormBox Micro II supports TWS (True Wireless Stereo) technology, which allows you to pair two StormBox Micro II speakers for a stereo mode experience.

  3. <strong>Does the Tribit StormBox Micro II have a microphone for making phone calls?</strong>

    Yes, the Tribit StormBox Micro II has a built-in microphone, allowing you to take phone calls while the speaker is connected to your device.

  4. <strong>How to connect Tribit StormBox Micro II in party mode?</strong>

    For Party mode make sure both StormBox 2 speakers are turned on. Long press the Bluetooth button on speaker A for 5 seconds to enter party mode. Long press the Bluetooth button on speaker B for 1 second to enter pairing mode. When you hear the prompt tone “Party Mode” both speakers are now connected.

  5. <strong>How to connect Tribit StormBox Micro 2 in stereo mode?</strong>

    For stereo mode make sure both speakers have entered party mode. Short press the Bluetooth button of any of the speakers. Release the button once you hear “Stereo Mode”.

Posts You Might Like

Leave a Comment