How To Fix Slow Printing In Windows 11 (2026)
A printer that takes minutes to start a job, or crawls through each page, is often held back by a setting and not by a fault.
Microsoft says the cause is often simple, such as print quality settings, network delays, or outdated drivers.
Here are Microsoft’s five checks for Windows 11, followed by the speed settings printer makers point to.
Quick answer: speed up slow printing
| Step | What to do |
|---|---|
| 1. Lower the quality | Start > Settings > Bluetooth & devices > Printers & scanners, select the printer, then Printing preferences |
| 2. Match the paper | Set Paper Type to the paper that is actually in the tray |
| 3. Test with a cable | Switch from Wi-Fi to USB or Ethernet for one job |
| 4. Update firmware | Get the latest printer firmware from the maker’s support site |
| 5. Simplify the job | Compress large images, or print in draft or standard mode |
| 6. Check spooling | Printer properties > Advanced tab, then turn on the three spooling options |
Step 1: Lower the print quality
- Select Start > Settings > Bluetooth & devices > Printers & scanners.
- Select your printer.
- Select Printing preferences, which Microsoft’s page lists under Manage.
- Under Paper/Quality, choose a Print Quality level that is not higher than you need.
- Select OK and print the page again.
The Printing preferences window comes from the printer’s driver, so the tab may have a different name on your model.
Brother, for example, puts a Resolution setting on the Basic tab and says higher resolutions take longer to print.
Step 2: Match the paper type
In the same Printing preferences window, Microsoft says to confirm that Paper Type matches the paper in the tray.
Epson gives the same advice in its manuals, listing the right paper type as the first setting for fastest printing.
Check for a photo or glossy paper setting left on from an earlier job when plain documents print slowly.
Step 3: Try a wired connection
If the printer is on Wi-Fi, Microsoft suggests switching to USB or Ethernet for a moment to see whether network delay is the cause.
Epson notes that on a wireless network, interference, network traffic and weak signal strength can all slow printing.
If the same file prints quickly over a cable, the printer is fine and the Wi-Fi link needs the attention.
Epson also says a printer plugged into a USB hub should be connected directly to the computer instead.
Step 4: Update the printer firmware
Firmware is the software inside the printer, and it is updated separately from the Windows driver.
Microsoft’s instruction is to check the printer maker’s support site and install any firmware update listed there.
For the Windows side, our guide to updating a printer driver in Windows 11 covers the driver.
Step 5: Make the print job simpler
Large, image-heavy files take longer to prepare before the first page comes out.
- Simplify the document where you can.
- Compress large or high-resolution images.
- Print in draft or standard mode instead of the best quality mode.
If you do not need color, printing in black and white in Windows 11 is covered in a separate guide.
Step 6: Check the spooling options
Microsoft marks this step as advanced, so try it after the simpler checks above.
- Select Start > Settings > Bluetooth & devices > Printers & scanners.
- Select your printer, then select Printer properties.
- Open the Advanced tab.
- Turn on “Spool print documents so program finishes printing faster”.
- Turn on “Start printing after last page is spooled”.
- Turn on “Print spooled documents first”.
- Select Apply, then OK.
Microsoft says these settings help the printer prepare jobs more efficiently, reduce pauses and avoid network delays.
Where each speed setting lives
| Setting | Where to find it | Set it to |
|---|---|---|
| Print Quality | Printing preferences > Paper/Quality | No higher than the job needs |
| Paper Type | Printing preferences > Paper/Quality | The paper in the tray |
| Spooling options | Printer properties > Advanced | All three turned on |
| Resolution (Brother) | Printing Preferences > Basic | A lower value |
| High Speed (Epson) | Printer properties > More Options | Enabled |
| Quiet Mode (Epson, Brother) | Varies by model; see the manual | Off |
Turn off Quiet Mode on the printer
Quiet Mode makes a printer less noisy by running it slower.
Brother states plainly that Quiet Mode slows printing, and that it is off by default on the laser model its FAQ covers.
Epson’s slow-printing page also starts by telling you to make sure Quiet Mode is off.
Neither page gives one path that fits every model, so check your model’s manual for where the switch is.
Other speed checks from printer makers
- Epson: turn on any high speed setting in the printer software, and select a lower print quality.
- Epson: make sure the ink drying time has not been increased for double-sided printing.
- Epson: close programs you are not using and free up space on the hard drive.
- Epson: if printing slows after a long run, let the printer rest for 30 minutes with the power on.
- Brother: make sure the back cover is closed firmly and the duplex tray is seated securely.
Which fix matches what you see
| What you see | Try first |
|---|---|
| Long wait before the first page | Steps 3 and 6 |
| Each page prints slowly | Steps 1 and 2, then Quiet Mode |
| Only photos or PDFs with images are slow | Step 5 |
| Slow only over Wi-Fi | Step 3 |
| Nothing prints and jobs pile up | Clear the print queue in Windows 11 |
If printing is still slow
Run through the steps once more with a one-page text document, so a heavy file is not skewing the result.
If that page is slow over USB at a standard quality setting, contact the printer maker’s support with the model number and what you have tried.
Microsoft’s wider guide, Fix printer connection and printing problems in Windows, is the next stop for anything that is not about speed.
Sources
Steps come from Microsoft Support’s Troubleshoot slow printing issues in Windows, Epson’s Printing is Slow manual page, and Brother’s The print speed is slow FAQ.