How To Fix Wi-Fi: No Hardware Installed On A Mac (2026)
The message Wi-Fi: No hardware installed shows in the Wi-Fi menu on a Mac that cannot find its wireless hardware.
Apple does not publish a page that quotes that exact wording, so this guide follows Apple’s own steps for a Mac whose Wi-Fi is missing or will not connect.
The steps run from the free checks to Apple Diagnostics, and they stop at the point where the Mac needs service.
Quick answer: what to try, in order
| Order | Check | What to do |
|---|---|---|
| 1 | Restart | Shut the Mac down fully and start it again |
| 2 | Network settings | Open System Settings > Network and look for Wi-Fi in the list |
| 3 | Add the service | If Wi-Fi is missing, use Action > Add Service and choose Wi-Fi |
| 4 | Updates | Install macOS updates, using Ethernet or another network if needed |
| 5 | Safe mode | Start in safe mode to rule out startup software |
| 6 | NVRAM | On an Intel Mac, reset NVRAM with Option-Command-P-R at startup |
| 7 | Apple Diagnostics | Run the test and note any reference code |
What the message means
The Wi-Fi menu normally lists networks, so a line saying No hardware installed suggests the Mac is not detecting its Wi-Fi hardware at all.
That is different from a Mac that sees networks but cannot join one, which is covered by our guide to Wi-Fi not working on a Mac.
The cause can be a missing network service, a software fault or a hardware fault, so work through the list before assuming a repair.
Shut down and restart the Mac
- Choose Apple menu > Shut Down.
- Wait until the screen is black and the lights are off.
- Turn the Mac on again and open the Wi-Fi menu.
Apple notes that a restart also prompts the Mac to renew its internet address when the problem is the network instead of the hardware.
Check whether Wi-Fi is listed in Network settings
Apple says that if your Mac has wireless capability but Wi-Fi does not appear in Network settings, the Wi-Fi service may not be set up.
- Choose Apple menu > System Settings, then click Network in the sidebar.
- Scroll down if you do not see Network at first.
- Look for Wi-Fi in the list of services.
If Wi-Fi is listed, turn it on with the Wi-Fi status menu, which Apple names as the first step when a Mac cannot connect.
Add the Wi-Fi service
When Wi-Fi is missing from the list, Apple’s fix is to add it back as a network service.
- In System Settings > Network, click the Action pop-up menu and choose Add Service.
- Click the Interface pop-up menu and choose Wi-Fi.
- Type a name in the Service Name field.
- Click Create.
If Wi-Fi is not offered as an interface at all, the Mac may not be detecting the hardware, so continue with the steps below.
Install macOS updates
Apple lists updating macOS among its checks for a Mac that cannot reach the internet over Wi-Fi.
With no Wi-Fi you need another route, so use Ethernet or a different network if you have one.
If the update will not install, see our guide to a Mac that will not update macOS.
Start in safe mode
Apple says safe mode helps you tell whether software that loads at startup is causing a problem.
| Mac type | How to start in safe mode |
|---|---|
| Apple silicon | Shut down, hold the power button until startup options appear, select a volume, hold Shift and click Continue in Safe Mode |
| Intel | Turn on or restart the Mac and hold Shift immediately until the login window appears, then log in |
Safe Boot appears in the menu bar when it worked, and you can then check the Wi-Fi menu again.
If Wi-Fi returns in safe mode, the cause is likely software that loads at startup, and a normal restart will bring the problem back until that software is removed.
Reset NVRAM on an Intel Mac
Apple lists Option-Command-P-R, which resets NVRAM or PRAM, as a startup key combination for Intel Macs only.
- Shut down the Mac, holding the power button for up to 10 seconds if it will not shut down.
- Press the power button to turn the Mac on.
- Immediately press and hold Option, Command, P and R together, not one at a time.
- If nothing happens, wait a few seconds for the Mac to recognize the keyboard.
- Use the built-in keyboard, a wired keyboard or a Mac wireless keyboard plugged in.
- A PC keyboard may not work.
- Some key combinations do not work while a firmware password is set.
- If the Mac starts in Windows with Boot Camp, set the startup disk to macOS first.
Apple silicon Macs do not use this key combination.
Run Apple Diagnostics
Apple Diagnostics tests the Mac’s hardware and gives reference codes when it finds a fault.
| Mac type | How to start Apple Diagnostics |
|---|---|
| Apple silicon | Hold the power button until Options appears and release it, then hold Command-D until the Mac restarts |
| Intel | Turn the Mac on and hold D immediately, or Option-D if D does not work, and release at a progress bar or language prompt |
- Shut the Mac down first and unplug everything except the keyboard, mouse, display, Ethernet and power.
- Put the Mac on a hard, flat, stable surface with good ventilation.
- If asked, choose Run Offline unless Apple Support or a technician started an online session.
- In macOS Tahoe 26 and later you choose a specific diagnostic.
Write down any reference code, because Apple says to give it to the service provider.
When the Mac needs service
If Wi-Fi is still reported as missing after Apple Diagnostics, the wireless hardware may need repair.
Apple says you can take the Mac, with the reference code, to an Apple Authorized Service Provider, an Apple Store or an Independent Repair Provider.
Apple adds that Independent Repair Provider repairs are not covered by Apple’s warranty or AppleCare, though the provider may offer its own.
Get online in the meantime
Apple names Ethernet as an alternative connection for Recovery, so a wired connection is the likeliest way to get online while Wi-Fi is down.
Apple’s Wi-Fi guidance also suggests trying a different network to learn whether the fault is with your Mac or with the original network.
Sources
- Apple Support: If you don’t see Wi-Fi in Network settings on Mac
- Apple Support: If you can’t connect to a Wi-Fi network on Mac
- Apple Support: If your Mac isn’t connecting to the internet over Wi-Fi
- Apple Support: Start up your Mac in safe mode
- Apple Support: Mac startup key combinations
- Apple Support: Use Apple Diagnostics to test your Mac