How To Fix Recovery Server Could Not Be Contacted On Mac (2026)

The message The recovery server could not be contacted appears when a Mac cannot reach the internet from macOS Recovery.

It usually stops a reinstall of macOS or an Internet Recovery startup before anything has changed on your disk.

Apple does not publish a page for that exact sentence, so this guide uses the network advice on its macOS Recovery and reinstall pages, which is what applies.

Quick answer: what to try, in order

OrderCheckWhat to do
1ConnectionJoin a working Wi-Fi network from Recovery, or plug in an Ethernet cable
2Network typeAvoid networks that need a browser sign-in, 802.1X security or PPPoE
3RouterRestart the router, or try a different network such as a phone hotspot
4Startup keysOn an Intel Mac try Command-R, Option-Command-R and Shift-Option-Command-R
5KeyboardUse the built-in keyboard or a Mac keyboard, and wait a few seconds before pressing keys
6LaterTry again after a while in case the problem is temporary

What the message means

macOS Recovery is the built-in set of tools for reinstalling macOS, repairing a disk or restoring from Time Machine.

Apple says that if built-in Recovery fails, the Mac tries to start Recovery over the internet and shows a spinning globe.

Installing from Recovery needs a connection to Apple, so a network that is down or blocked ends in this message.

Recognize a failed Internet Recovery

Apple says a spinning globe with a warning symbol, which is an exclamation point, means Internet Recovery failed.

Apple also says the warning screen and errors such as -2001F, -2002F and -2003F are usually network or internet problems.

For error -1008F Apple has a separate page, so do not apply the network steps below to that code.

Fix the connection first

  1. Start the Mac in macOS Recovery.
  2. If asked, choose a Wi-Fi network or connect an Ethernet cable.
  3. If the network does not appear or fails to join, move closer to the router.
  4. Try again once the Mac shows that it is connected.

Apple notes that an Ethernet connection may work better than Wi-Fi for Internet Recovery.

Use a network Recovery can accept

Apple says reinstalling from Recovery needs a broadband connection that uses DHCP over Wi-Fi or Ethernet.

Network typeResult with Recovery
Home Wi-Fi or Ethernet with DHCPWorks for installing macOS
Captive network that asks you to sign in on a web pageCan prevent installation
802.1X security, common at schools and officesCan prevent installation
PPPoECan prevent installation unless a router handles PPPoE for you

If you are on a hotel, school or office network, switch to home Wi-Fi or a hotspot that has no sign-in page.

Restart the router or try another network

Apple’s Wi-Fi guidance says restarting the router may help, and that if the internet works on another network the original network is the likely problem.

  1. Unplug the router, wait a minute, and plug it back in.
  2. When the network returns, start Recovery again.
  3. If it still fails, join a different network, such as a phone hotspot.

If the Mac can start macOS normally, our guide to Wi-Fi not working on a Mac covers fixing the connection itself.

Try each startup key combination

Apple lists three Intel key combinations, and each one can change which macOS version is offered.

Keys held at startupWhat Apple says it does
Command-RStarts local Recovery and installs the current version of the most recently installed macOS
Option-Command-RStarts Internet Recovery and may install the latest macOS compatible with your Mac
Shift-Option-Command-RStarts Internet Recovery and may install the macOS that came with your Mac, or the closest version still available

Apple’s advice for the warning globe is to try each combination, because one may succeed where another fails.

Start Recovery on an Apple silicon Mac

Apple silicon Macs do not use the key combinations above.

  1. Shut down the Mac, or hold the power button for up to 10 seconds if it will not shut down.
  2. Press and hold the power button until Loading startup options appears.
  3. Click Options, then click Continue.
  4. If asked, choose your startup disk and a user whose password you know.

Apple says Apple silicon Recovery installs the current version of the most recently installed macOS.

Check the keyboard on an Intel Mac

If the startup keys seem to do nothing, the problem may be the keyboard rather than the network.

  • Use a Mac laptop’s built-in keyboard if you can.
  • With an external keyboard, wait a few seconds after startup before pressing keys.
  • Plug in a wireless keyboard, or use a wired one.
  • Use a Mac keyboard, because a PC keyboard such as one with a Windows logo may not work.

If the Mac is set to start up in Windows with Boot Camp, Apple says to set it to start up in macOS first and then try again.

If you see a different startup screen

A blank screen, a question mark, a lock symbol or an exclamation point in a circle means the Mac did not fully start, which is a different problem.

Our guides to a flashing question mark and a Mac that will not turn on cover those screens.

What to try if the connection is fine

Apple’s general order for macOS install errors begins with free storage, then a stable internet connection, then installing from macOS Recovery.

If the install gets as far as an error but still fails, see our guide to the Mac that will not update macOS.

Apple lists repairing the startup disk next, then reviving or restoring firmware on Apple silicon or T2 Macs, then erasing the Mac as a last resort.

When to contact Apple

If every key combination and several different networks fail, Apple says to contact Apple Support.

Apple’s reinstall page also says that if Disk Utility cannot see or erase the startup disk, the Mac may need service.

Sources

Leave a Reply

Your email address will not be published. Required fields are marked *