How to Fix Samsung TV Motion Blur and Judder

If your Samsung TV is experiencing motion blur or judder during fast-moving scenes, this guide provides several troubleshooting methods to help improve your viewing experience. Follow the step-by-step instructions under each method to reduce or eliminate these motion artifacts.

Method 1. Adjust Auto Motion Plus Settings

Modifying the Auto Motion Plus settings can help reduce unwanted motion blur and judder on your display.

Access the Settings Menu: Press the Home button on your remote and navigate to Settings > Picture > Expert Settings.
Locate Auto Motion Plus: Scroll down to find the Auto Motion Plus option.
Modify Settings: Toggle the feature on or off, or adjust the blur reduction and judder reduction levels according to your preference.
Test the Changes: Play content with fast-moving scenes to determine if the adjustments have improved the motion quality.

Method 2. Change the Picture Mode

Selecting the appropriate picture mode can minimize excessive processing that may cause motion artifacts.

Open Picture Settings: Navigate to Settings > Picture on your Samsung TV.
Select a Picture Mode: Choose a mode like Standard or Movie which generally applies less aggressive motion processing compared to modes like Dynamic.
Fine-Tune Options: If available, adjust individual settings related to motion clarity within the chosen mode.
Evaluate the Results: View content with rapid motion to see if the judder and blur have been reduced.

Method 3. Update the TV’s Firmware

Keeping your TV’s firmware up-to-date can resolve known issues and improve overall performance, including motion handling.

Access Software Update Settings: Go to Settings > Support > Software Update on your TV.
Check for Updates: Select the option to Check for Updates.
Download and Install: If an update is available, follow the on-screen instructions to download and install it.
Restart and Test: After the installation is complete, restart the TV and check if the motion performance has improved.

Method 4. Optimize Input Source and Cable Quality

High-quality input sources and cables ensure a stable signal, which can reduce motion artifacts caused by poor data transmission.

Inspect HDMI Cables: Ensure that the HDMI cables connecting your external devices to the TV are not damaged and are securely attached.
Switch Ports or Cables: Try connecting to a different HDMI port or replace the cable with a higher-quality one to rule out cable issues.
Verify Source Settings: Check that the connected device is outputting video at a refresh rate compatible with your TV.
Test the Signal: Play a high-motion video to determine if the improved connection quality minimizes motion blur and judder.

Method 5. Perform a Power Cycle

Power cycling your TV can reset internal processes that might be causing temporary motion display issues.

Turn Off the TV: Use the remote or the physical power button to switch off your TV.
Unplug the TV: Disconnect the TV from the power outlet and wait at least 60 seconds.
Discharge Residual Power: Optionally, press and hold the TV’s power button for 10–15 seconds to ensure all residual power is discharged.
Reconnect and Restart: Plug the TV back in, power it on, and test the motion display with your content.

Method 6. Contact Samsung Support or a Professional Technician

If all troubleshooting methods fail, professional assistance may be required to address persistent motion issues.

Document the Issue: Record your TV’s model number, firmware version, and detailed information about the motion blur or judder issue.
Visit the Samsung Support Website: Look for additional troubleshooting guides or warranty information on Samsung’s official support page.
Contact Customer Service: Reach out to Samsung customer support or an authorized service provider for further assistance.
Follow Professional Guidance: Arrange for a service appointment if recommended, and follow the technician’s instructions for repair or adjustments.