How To Fix EVgo Not Starting A Charge (2026)
An EVgo charger that will not start is usually down to the app, a payment method or a charger that only looks free.
EVgo’s help center lists a short set of checks for each cause.
This guide follows those EVgo help articles and gives the Charging Crew number for when they do not work.
Quick answer: why an EVgo session will not start
| Problem | What EVgo says to try |
|---|---|
| App will not load or log in | Update the app and your phone, log out and back in, restart, then reinstall |
| Charger grayed out in the app | It is under maintenance or reserved, so use another charger at the site |
| Payment method error | Add or update a valid payment method in your EVgo account |
| Charger looks free but will not start | Another vehicle may be plugged in, so look for a Simultaneous EV Charging sign |
| Weak signal in a garage | Use your RFID Program Card as a backup |
| Still stuck | Call the EVgo Charging Crew at 877-494-3833, available 24/7 |
Start a charge with the EVgo app
- Open the app when you arrive at the station.
- Select your station from the suggested nearby locations, or search by charger or location name.
- Confirm the charger name shown above or below the charger screen.
- Choose the connector that fits your vehicle.
- Plug the connector into the charge port and listen for a click.
- Tap Start Charging.
- Choose whether to get push notifications about the session.
EVgo says that if you start the charge before plugging in, you have 120 seconds to connect the fast-charge connector.
If the charger cannot recognize your vehicle, the app shows an error message.
Fix the EVgo app not working
EVgo’s general app troubleshooting covers login, loading and charge-starting problems.
- Install the latest version of the EVgo app.
- Update your phone.
- Log out and log back in, and fully close the app first if that helps.
- Fully close the app so it is not running in the background.
- Restart your phone.
- Uninstall and reinstall the EVgo app.
Also turn on location services, since EVgo says they help the app recognize the station.
When the charger is grayed out in the app
EVgo says a charger appears unavailable in the app if it is under maintenance or reserved.
An unavailable charger will not start even at the credit card reader.
Pick another charger at the same location, or change your map filters if no connector fits your car.
A charger that looks free but is in use
EVgo says a charger can look available while another vehicle’s cable is already in use.
Check the station for a Simultaneous EV Charging sign, which means another vehicle is plugged in.
The dedicated spot can be usable for parking even while the charger is occupied.
Fix a payment method error
EVgo states that you need a valid payment method on file to start a charge.
- Open your EVgo account payment settings.
- Add or update your payment method.
- Try the charge again, and EVgo says the app should process it and start the charge.
If your payment method is current and the error continues, call the Charging Crew.
Other ways to start a charge
| Method | How it works |
|---|---|
| Autocharge+ | Enroll first, then plug in a CCS connector and the charger starts once your vehicle is tied to your account |
| EVgo RFID Program Card | Select the connector, plug in, choose RFID on the charger screen and tap the card on the reader |
| Credit card at the station | Select the connector, plug in, choose credit card and swipe, tap or insert your card |
| Call the Charging Crew | Be ready to verify your name, email and the last 4 digits of your card |
Some stations do not accept payment outside the app or an RFID card, and if there is no card reader EVgo says to call for help.
Why EVgo says to avoid the credit card reader
EVgo says a session started at the card reader is not tied to your EVgo account.
It also incurs a session fee and does not appear in your account, so use the RFID Program Card instead if you have one.
If the connector will not release
EVgo’s Stuck Connector Guide lists these steps after charging ends.
- Completely end the session, and tap End Session on the charger screen if needed.
- Unlock your vehicle and any charging port lock.
- Gently press and hold the latch on the connector.
- Pull straight back to disconnect.
On a fast charger the session must be fully stopped first, and if energy is still flowing the connector stays locked to protect you, your car and the station.
EVgo notes that a 2021 or newer vehicle with a charging schedule may not release the connector while it waits to charge later.
For a CCS connector with a rigid release button, EVgo says to use the emergency stop only if you are certain the session has stopped, and the Charging Crew can talk you through it.
How to stop a session
| Charger type | How to stop |
|---|---|
| DC fast charger | Select Stop on the charger screen, after choosing your connector if the button is not showing |
| Level 2 charger | Unplug the connector and return it to its dock |
| Fast charger limits | Stops automatically after 120 minutes or when the battery is full |
| Level 2 limits | Stops automatically when the battery is full |
EVgo warns that a Level 2 connector left plugged in after charging stops may restart charging to offset battery energy loss.
Use the emergency stop only in an emergency
Most fast chargers have a red emergency stop button.
EVgo says to call the Charging Crew first if you think you need it, and to reset it afterward by twisting the red button clockwise until it pops out.
If you do not reset it, the charger may stay disabled for the next driver.
When to call EVgo
The EVgo Charging Crew is available 24/7, every day of the year, at 877-494-3833.
For app problems that phone agents cannot fix, EVgo points drivers to its App issue form.
Related guides
For other networks, see Electrify America not starting a charge and ChargePoint not starting a charge.
If you drive a Tesla, read how to fix a stuck Tesla charge cable.
Non-Tesla drivers can also see how to charge at a Tesla Supercharger.
Sources: EVgo: Start a charging session, EVgo: General app troubleshooting, EVgo: Stuck Connector Guide and EVgo: Stop a charging session.