How To Fix Electrify America Not Starting A Charge (2026)

An Electrify America charger that will not start is usually waiting on a step you can still complete.

The common causes are a missed time window, a payment problem or a connector that did not seat properly.

This guide follows the steps in Electrify America’s own FAQ and charging pages.

Quick answer: why a session will not start

ProblemWhat to try
Nothing happens after you plug inPresent payment within about 45 seconds, or the session times out
Phone tap does nothingPlug in first and follow the charger screen, then tap the reader
App will not start the chargeTurn on location services, log in and match the Charger ID
Payment declinedUpdate your payment method in the app
Charger shows an errorStop, unplug, reconnect and start a new session, or move to another charger

Start within the time limit

Electrify America says you have about 45 seconds after plugging in to present payment.

If you use Swipe to Start, plug in within 45 seconds of swiping.

When the time runs out, stop the session and begin again.

Fix a phone tap that does not start

Members using a phone tap should plug in the connector first and follow every step on the charger screen.

Only then tap the phone on the RFID reader.

PhoneWhat to do
AndroidTurn on NFC and unlock the screen, and the app does not need to be open
iPhoneUse Apple Wallet or the app, and tap the reader on the right side of the charger

Fix the app not starting a charge

  1. Turn on location services and log in to the Electrify America app.
  2. Stand near the charger and select the station.
  3. Match the Charger ID with the last two digits shown on your charger.
  4. Tap Start Charging.
  5. Push the connector firmly into the port until you hear a click.

Charging may take a few minutes to begin after you start it.

Starting as a guest

Plug in and follow the touchscreen prompts.

Enter a Visa or Mastercard, and insert a chip card fully if it has a chip.

Guests must resubmit payment each time they start a new session.

Fix a declined or failed payment

If a payment declines during a session, Electrify America says you must update your payment method to continue.

  1. Open the app.
  2. Go to Account, then Payments.
  3. Select Add a Payment Method.

If the method on file is invalid, charging will not proceed.

Authorization holds explained

A hold is a temporary reservation on your card and not a charge.

ItemWhat Electrify America says
Member starting hold$20 when you start
Extra member holds$10 more at $18, $28, $38 and every $10 after that
What you payOnly the final session cost plus taxes and fees
Release timeDepends on your bank

Holds may appear even on sessions covered by a promotion.

When the charger shows an error

  1. Check that the cable clicked in, and unplug and reconnect it if not.
  2. If a session is still active, press Stop in the app or on the charger.
  3. Unplug the cable, unlocking the car if needed, then reconnect.
  4. Start a new session and resubmit payment.

If the error continues, move to another charger and report the problem to the Contact Center number above the charger screen.

If the connector is stuck

  1. Confirm the session has stopped.
  2. Confirm the vehicle is unlocked.
  3. Relieve any tension on the cable.
  4. If the connector button is stuck down, push the connector in until it clicks, then press the button and pull straight out.

If it still will not release, call 1-833-632-2778 and do not force it.

Charging stops early or slows down

What you noticeElectrify America’s explanation
Slows near 80%Many vehicles slow around 80% state of charge, which is normal
Reduced powerSome chargers run at lower power for maintenance but still work
Cold weatherCold lowers the power your EV accepts
Slower than the labelYour car may not accept a connector’s maximum, and Balanced chargers share power

Check the Network Status page for stations offline for upgrades, maintenance or outages.

Real-time charger availability is shown in the app, so look there before you drive to a station.

Plug&Charge and starting from the car

Plug&Charge is available at all Electrify America stations, but only for EVs that support it.

To check whether your car qualifies, contact your vehicle manufacturer or read the owner’s manual.

You can also start from the car through Apple CarPlay or Android Auto, which Electrify America says need iOS 16 or later, or Android 9 or later.

Login and one-time code trouble

You need the app to create an account and log in.

The app sends a one-time code by SMS or email, and signing in with a passkey skips that code.

If you receive a code you did not request, reset your password right away in the app or on the website.

Reading the charger labels

Each charger shows connector icons at the top that should match your vehicle’s port.

Lightning bolts at the bottom show the power level, so choose the charger whose connector fits your car.

LabelMeaning
Hyper-Fast (green)CCS connector, up to 350 kW
Ultra-Fast (teal)CCS connector, up to 150 kW
CHAdeMO (blue)Up to 50 kW
Balanced tagShares a power cabinet with the neighboring charger

Beware of QR codes at chargers

Electrify America says it will never ask you to complete payment by scanning a QR code.

If you see a suspicious QR code or sticker, select the station in the app, tap Support, then Report Issue.

When to contact Electrify America

Call Customer Assistance at 1-833-632-2778, which the company lists as available 24/7.

For a problem at a specific charger, use the Contact Center number above the charger screen.

For another network, see how to fix ChargePoint not starting a charge.

Tesla drivers can read how to use a Tesla Supercharger with a non-Tesla EV.

Our EVs versus gas cars guide covers ownership costs.

Sources: Electrify America FAQ, How to Charge Your EV and What to Expect When You Charge.

Leave a Reply

Your email address will not be published. Required fields are marked *