Roomba Not Charging: How To Fix It (2026)

A Roomba that will not charge usually shows a numbered charging error or a light pattern instead of finishing its cycle.

Most of those errors trace back to dirty charging contacts, a base without power, or a battery that needs to be reseated.

The steps below follow iRobot’s own support articles, starting with the fastest checks.

Quick answer: what to try first

StepWhat to do
1Check that the base has power at the wall and at the base.
2Unplug the base for 60 seconds, then clean the metal contacts on the robot and the dock.
3Remove and reinstall the battery to clear the error.
4If the error stays, leave the battery out for at least 30 minutes, then try again.
5Contact iRobot Customer Care if the contacts look green or copper colored.

Why a Roomba stops charging

iRobot explains that charging depends on three parts working together: the battery, the robot and the dock.

An error can come from any one of the three, so the fix depends on which number the robot shows.

The iRobot HOME app also reports these errors, and its numbers run from 101 to 121 instead of 1 to 21.

Check the base has power

  1. Look at the cord at the wall outlet and at the base.
  2. Unplug both connections.
  3. Plug them back in firmly.
  4. Set the robot on the base again and watch whether it starts charging.

Clean the charging contacts

Dirty or damaged contacts are the most common cause of charging errors 19 and 21, according to iRobot.

  1. Unplug the base and wait 60 seconds.
  2. Take the robot off the dock and set it upside down on a flat surface.
  3. Lightly dampen a melamine foam pad (such as a Magic Eraser) or a cloth.
  4. Wipe the metal contacts on the robot and on the dock until they have a visible shine.
  5. Plug the base back in and place the robot on it.

Charging error numbers and what to do

iRobot publishes one chart that covers the 500 to 900 series and the e, i, j, s and m series.

ErrorMeaningiRobot fix
1Robot does not detect the batteryRemove and reinstall the battery
2Charge fault (over-current)Use an authentic iRobot lithium-ion battery; check for liquid damage
3Charge fault (charging system)Try charging again; check for liquid damage
4 and 5Low current in the dock or robotClean the charging contacts
6 and 7Battery too hot (6) or too cold (7)Bring the robot to room temperature and try again
8Robot cannot communicate with the batteryConfirm the battery is authentic; remove and reinstall it
9 and 11Battery failure or hardware failureConfirm authentic battery; reinstall; it may need replacing
17Battery may not be iRobot AuthenticUse an authentic battery; remove and reinstall it
19Charging timed outReinstall the battery; clean the contacts
20Battery fault or not ready to chargeRemove the battery for 15 minutes, then reinstall
21Robot docked but could not chargeClean the charging contacts

The same errors in the iRobot HOME app

The app numbers mirror the charging chart with 100 added, so error 19 appears as 119 and error 21 appears as 121.

App codeMeaningiRobot fix
104No current detected in the dock or robotClean the charging contacts
105Low current in the dock or robotClean the charging contacts
106 and 107Battery too warm (106) or too cold (107)Bring the robot to room temperature
114Internal battery failureReplace the battery
119Charging timed outReinstall the battery; clean the contacts
120Battery fault or not ready to chargeRemove the battery for 15 minutes
121Robot docked but could not chargeClean the charging contacts

If you see charging error 19

Error 19 means the robot sits on its base but cannot charge, and a charge that takes far too long makes the battery time out.

  1. Take the robot off the dock, put it into Sleep or Ship mode, then place it back on the dock.
  2. Remove and reinstall the battery.
  3. Clean the contacts as described above.
  4. Confirm the base has power.
  5. If the error continues, reseat the battery once more.

If you see charging error 21

Error 21 means the robot is docked but loses charge instead of staying charged.

iRobot says the most common cause is contacts that need cleaning, so the contact steps above come first.

If the error persists afterward, remove and reinstall the battery to clear it.

Reset the battery properly

For a stubborn error 19, iRobot’s last self-help step is to take the battery out and leave it outside the robot for at least 30 minutes.

Error 20 asks for a shorter wait, with the battery removed for 15 minutes before you reinstall it.

After the wait, put the battery back, seat it fully and try charging again.

Use only a genuine iRobot battery

iRobot warns that counterfeit or aftermarket batteries can cause charging errors and can void the warranty.

The same warning applies to unauthorized resellers, so errors 2, 8, 9, 11 and 17 are worth treating as a battery-source question first.

When cleaning will not help

Contacts that look green or copper colored are damaged, according to iRobot.

In that case the robot or the base with the damaged contacts has to be replaced, because cleaning does not repair them.

When to contact iRobot support

If the error remains after the steps above, contact iRobot Customer Care.

  • Have the robot charged and with you.
  • Have its serial number ready.
  • For a warranty claim, have proof of purchase from an authorized retailer.

If the robot charges but cannot get back to the base, read how to fix Roomba error 1010.

If it charges but drops offline in the app, see how to fix a Roomba that won’t connect to Wi-Fi.

Sources: iRobot charging error chart, iRobot charging error 19 and iRobot charging error 21.

Leave a Reply

Your email address will not be published. Required fields are marked *