How To Fix A Roomba That Won’t Connect To Wi-Fi (2026)
A Roomba that will not join your Wi-Fi usually has a network or phone setting in the way, not a broken robot.
iRobot’s setup guide names a short list of requirements that most failed setups miss.
This guide walks through them in order, from the quickest check to the router and firewall fixes.
Quick answer: what to check first
| Check | Why it matters |
|---|---|
| Phone is on the 2.4 GHz network | Many Roomba models only support 2.4 GHz. |
| Bluetooth and Precise Location are on | The iRobot Home app needs both during setup. |
| Password typed by hand | Pasted text with special characters may be rejected. |
| Network is not WPA3-only | iRobot says WPA3 is not supported. |
| Phone and robot on the same network | Setup fails if they are on different ones. |
Setup requirements from iRobot
Install or update the iRobot Home app, which needs iOS 15 or later, or Android 9.0 or later.
iPads and tablets are not supported for setup, and foldable phones are often treated as tablets.
The Wi-Fi network must allow device discovery, and your phone must stay on it while the robot is being added.
Turn Bluetooth on, and enable location services with Precise Location.
Check which Wi-Fi bands your model supports
iRobot lists the supported bands by model, so find yours before changing anything on the router.
| Band support | Models listed by iRobot |
|---|---|
| 2.4 GHz only | Roomba Essential, i1 to i5, Combo i5, Combo i8, Combo, 900, 800, 670/690 |
| 2.4 GHz and 5 GHz | Combo 10 Max, Combo j5, j7+/j9+, j7/j9, s9, i6 to i8 |
| No Wi-Fi | Models below the 670 |
If your robot is 2.4 GHz only, connect your phone to the 2.4 GHz network before you start.
That is usually the network without “5G”, “5.0” or “5” in its name, or one labeled “2G” or “2GHz”.
Our guide on whether 2.4GHz and 5GHz should be one network or two explains the trade-offs of splitting your router’s bands.
Prepare and place the dock
Remove tape and packaging from the robot and dock, then place the dock on a level surface with nothing around it.
Put it as close to the router as is practical, since the robot connects from the dock during setup.
Plug it in and look for a small light, except on the Roomba Essential, which has no dock light.
On the Essential, check that the power cord is fully inserted at both ends instead.
Add the robot in the app
- Open the main menu (three lines, upper right) and tap Add your product.
- Tap Set Up if the app finds your robot, or choose vacuum, mop or combo if it does not.
- On newer models (Combo 10 Max, j series, i6/i7/i8, s9), press the robot’s button when prompted, then pick your network and enter the password.
- On older models (600 to 900 series, e series, i1 to i5, Essential), pick the network and password first, then press the robot’s buttons when prompted.
- Stay on the app screen until setup finishes, then name the robot.
iRobot says linking the robot to your account can take a few minutes, and closing and reopening the app can help if it stalls.
If you hear no sound during activation
First confirm the dock light is solid while the robot sits on the dock.
If it is not, move the robot within 6 feet (1.8 m) of the dock, facing it.
Send the robot home with the Dock or Home button, and on single-button models such as the j series and Combo 10 Max, press and hold for 3 seconds.
If it docks, retry setup, and if it does not, iRobot says to contact Customer Care.
If the app cannot find the robot
After two failed attempts, the app asks you to select the temporary network the robot creates, then return to your own network.
Your phone may default to 5 GHz when it switches back, so reconnect it to 2.4 GHz if your robot needs that band.
General connection fixes
| Fix | How |
|---|---|
| Refresh the robot | Hold CLEAN for about 20 seconds while it sits on the dock. |
| Reboot the router | Unplug it for 10 seconds, then wait 2 minutes. |
| Reinstall the app | This clears the cache and gets the latest version. |
| Try another phone | If it works there, the problem is on the first device. |
| Try another network | Use another router, a hotspot or mobile data to isolate the cause. |
For router-side problems, see our notes on 2.4GHz versus 5GHz settings, which apply to most smart home devices.
Mesh networks and router compatibility
If your robot supports only 2.4 GHz, iRobot suggests temporarily turning off 5 GHz in your mesh system during setup.
Make sure the dock sits in a strong signal area, and that no two devices on the mesh share an IP address.
iRobot also notes known issues with some router makes, including certain Cisco, D-Link, Logitech, Microsoft, Motorola, Sagemcom, Time Warner, Western Digital and ZTE models.
Update the router firmware first, then check the compatibility table in iRobot’s article.
Firewall ports to open
| Direction | Ports |
|---|---|
| Internal | UDP 5353 and 5678 (discovery), TCP 443 (data), TCP 8080 and 8883 (MQTT) |
| Outbound | UDP 123 (time), TCP 443 and 80 (data), TCP 8080 and 8883 (MQTT), UDP/TCP 53 (DNS) |
Only change these if your router or firewall blocks traffic by default.
If the app says Roomba cannot connect right now
Go to Product Settings, then Wi-Fi Settings, then Reconnect or Change Product Wi-Fi.
Enter your Wi-Fi password again when asked.
Ownership errors C1CD and BRC1CD
If the app says the robot is registered to another account, or shows C1CD or BRC1CD, the robot needs an ownership change.
That requires a manual factory reset, after which you register the robot again once it reboots.
When to contact iRobot
If setup still fails after these steps, iRobot’s guide says to contact iRobot Customer Care.
Models older than the Roomba 670 have no Wi-Fi, so no setup method will connect them.