How To Fix ResMed myAir App Not Syncing With AirSense (2026)
How the myAir app gets its information from your ResMed machine depends on which AirSense you have.
The AirSense 11 connects to the app by Bluetooth, while the AirSense 10 sends its information to ResMed’s cloud and the app reads it from there.
This guide covers only the connection and the app, and for anything else, ask your equipment provider or doctor.
Quick answer: which machine do you have?
| Machine | How the myAir app gets its data | First thing to check |
|---|---|---|
| AirSense 11 | Bluetooth to the phone | Bluetooth is on and the machine shows a Bluetooth symbol in its status bar |
| AirSense 10 and AirCurve 10 | Indirectly, through ResMed’s AirView cloud database | Airplane Mode is off and the machine has a wireless signal |
ResMed’s myAir user guide says Bluetooth features are only available on the AirSense 11, and that other ResMed machines do not connect to the app directly.
AirSense 11: pair the machine with the app
If you already have a myAir account, ResMed gives these steps.
- Turn on the AirSense 11.
- Open the myAir app and tap Profile.
- Tap My equipment.
- Tap Pair Bluetooth.
- Follow the prompts to finish the Bluetooth connection.
- Look for the Bluetooth symbol in the status bar of the machine, then tap Done in the app.
For a first-time setup, create your account, tap AirSense 11 to choose your machine, and follow the prompts.
AirSense 11: if the Bluetooth connection will not work
The myAir user guide lists these steps in order.
- Check that Bluetooth is turned on in your phone’s settings.
- Pair the machine and the phone again with the steps above.
- Restart your phone if that does not work.
- Keep the machine away from interference such as microwaves, WLAN routers and cordless phones.
- Turn off Airplane Mode on the machine.
If your AirSense 11 shows in the device list but will not connect, the guide says to tap its name in the list to confirm that you want to connect to it.
Start over: disconnect and pair again
You can remove the connection and set it up again from inside the app.
- In the myAir app, tap Profile.
- Tap My equipment.
- Tap Update device.
- Tap Disconnect.
- Pair the machine again with the steps in the section above.
ResMed adds that the Test Drive feature needs an active Bluetooth connection.
AirSense 10: why there is no Bluetooth step
The myAir guide says the app reads AirSense 10 and AirCurve 10 information indirectly through ResMed’s AirView cloud database.
That means a cellular signal at the machine matters, and not your phone’s Bluetooth.
ResMed’s air solutions FAQ says the data is sent one hour after a session ends, if there is cellular coverage and the machine is not in Airplane Mode.
Check Airplane Mode on the machine
ResMed says AirSense and AirCurve machines show an airplane icon in the top-right corner and a message when they power on.
Airplane Mode turns off wireless connectivity, so the machine cannot send data to the cloud.
ResMed says the machine keeps the data stored and sends it when connectivity returns.
Check the signal where the machine sits
Poor cellular coverage can stop data from arriving in the app, according to ResMed’s FAQ.
ResMed suggests turning Airplane Mode off and moving the machine closer to a better signal.
If you travel, ResMed notes that data may not appear until you are back with cellular service and power the machine on.
App steps to try
| Step | Source |
|---|---|
| Log out of myAir and log back in, possibly several times | ResMed’s 2023 notice about a data delay |
| Unplug the machine and plug it back in | Same notice |
| Restart your phone | Same notice and the myAir user guide |
| Give the app time to catch up | Same notice |
That notice was about a specific past delay, which ResMed marked as resolved, but the steps it gives are general reset steps.
Match what you see to a fix
| What you see | Machine | Try this |
|---|---|---|
| No Bluetooth symbol in the machine’s status bar | AirSense 11 | Profile, My equipment, Pair Bluetooth, then follow the prompts |
| Machine listed but will not connect | AirSense 11 | Tap the machine’s name in the list to confirm the connection |
| Airplane icon in the top-right corner of the machine | AirSense or AirCurve | Turn Airplane Mode off on the machine |
| Nothing shows in the app after a session | AirSense 10 or AirCurve 10 | Check the signal, turn Airplane Mode off, and wait for the data to be sent |
| App will not open or sign in | Any | Check your phone runs iOS 14.0 or Android 8.0 or later, then log out and back in |
If there is no cellular coverage at all
ResMed’s FAQ says a care provider can use a ResMed SD card to collect data when a patient has poor cellular coverage.
The card is returned to the provider to be uploaded into AirView.
Ask your equipment provider whether this is an option for you, since it is arranged by the provider and not in the app.
Is your phone supported?
The myAir user guide lists iOS 14.0 and later and Android 8.0 and later.
If your phone is older than that, update it if you can before trying the steps above.
Our guide to resetting network settings on iPhone may help if your iPhone’s Bluetooth is misbehaving for all devices.
If you pair other Bluetooth devices, our hearing aid pairing guide shows the same iPhone and Android Bluetooth menus.
When to contact your provider or ResMed
The myAir user guide says to contact your service provider or ResMed if you cannot resolve a problem.
It also says that if you have a problem with the AirSense 11 itself, you should not open it.
For questions about your settings or your results, contact your equipment provider or doctor, because this guide covers only the connection.