Hearing Aids Won’t Connect To iPhone Or Android (2026)

If your hearing aids will not connect to your phone, the fix is usually to put them back into pairing mode and pair them again from the phone’s settings.

This guide covers only the phone connection: pairing, Bluetooth and the maker’s app.

For anything about how the hearing aids sound or how they are programmed, contact your audiologist.

Quick answer: where to pair

PhoneWhere to pair
iPhone (Made for iPhone hearing aids)Settings, Accessibility, Hearing Devices, Pair MFi Hearing Device
Android, method 1Settings, Connected devices, Pair new device
Android, method 2Settings, Accessibility, Hearing devices, Pair new device
Pixel phoneSettings, Accessibility, Hearing Devices, Pair new device

Step 1: Put the hearing aids in pairing mode

Apple says to check your hearing aid’s user guide, and it lists three common ways to start pairing.

  • With replaceable batteries, open the battery door and close it when you are ready to pair.
  • With an on and off switch, turn the hearing aid off and then on again.
  • With built-in rechargeable batteries and no switch, take the hearing aid off its charger.

Keep the hearing aids close to the phone while you pair them.

Step 2: Pair with an iPhone

Apple’s page is about Made for iPhone hearing devices, so first confirm that yours are on Apple’s compatibility list.

  1. Update your iPhone to the current version of iOS.
  2. Open Settings.
  3. Tap Accessibility, then tap Hearing Devices.
  4. Tap Pair MFi Hearing Device and follow the onscreen instructions.
  5. Select your hearing aids from the list and tap Pair.

Apple notes that pairing a new hearing device replaces any hearing device that was paired before.

Step 3: Pair with an Android phone

Google gives two ways to pair, and the first works with all hearing devices.

  1. Open Settings.
  2. Tap Connected devices, then tap Pair new device.
  3. Select your hearing aid from the list.
  4. For a second hearing aid, wait for the first to connect and then select the second one.

The second way is Settings, then Accessibility, then Hearing devices, then Pair new device, which Google says works best with ASHA-compatible hearing devices.

If you cannot see yours, Google says to tap See more devices on the Connected devices page.

Check that the phone and hearing aids match

Google’s Pixel page says that both the phone and the hearing aid must support ASHA, or both must support HAP, to pair this way.

It tells you to ask your audiologist or the hearing aid maker to confirm which your hearing aids support.

Hearing aids without ASHA or HAP may still stream through other devices, so ask your audiologist or the maker about those.

If your iPhone cannot find or keep the hearing aids

ProblemWhat Apple says to try
Not listed in Hearing DevicesMake sure they are compatible and in pairing mode, restart the iPhone, and unpair them from any other Apple device first
Name is dimmedMove them closer, or unpair and pair again
Disconnects unexpectedlyKeep the iPhone nearby, check the batteries, and check for wireless interference
Connected but no audioSelect the hearing aids as the sound output, and check the microphone level in Hearing Devices settings

To start over, open Settings, Accessibility, Hearing Devices, tap the device name, and tap Forget this device.

Apple says an unpaired device will not reconnect until you pair it again.

Update the hearing aid firmware

Apple says the hearing device’s firmware may need updating, and that the maker’s app can usually install updates.

Open the app that came with your hearing aids and look for an update prompt.

If the maker’s app will not connect

As an example, Phonak’s support site lists these checks for its myPhonak app, and other makers have their own pages.

  1. Check your internet connection, because setup needs it.
  2. Turn on Bluetooth on the phone.
  3. Confirm the hearing aids are on and have enough battery power.
  4. Turn the hearing aids off and on to put them in pairing mode, which Phonak says lasts several minutes.
  5. Make sure the phone and the hearing aids are not in flight mode.
  6. On Android, turn on Location Services during the first setup.

Phonak adds that rechargeable hearing aids can enter flight mode by accident if you hold the button too long while powering on, and a solid orange light shows it.

Phonak says to turn each hearing aid off and on again to exit flight mode.

After pairing on Android

To do thisGo to
Open a device’s settingsTap the Settings icon next to its name
Choose where sounds playSettings, Accessibility, Hearing devices, then the Sound options
Check connection and batteryQuick Settings

Phone calls without Bluetooth: M and T mode

Google’s Pixel page describes two ways to use a phone with hearing aids that do not rely on Bluetooth pairing.

  • For M mode, set the hearing aid to M and hold the phone’s receiver close to the hearing aid’s microphones.
  • For T mode, set the hearing aid to T and turn on hearing aid compatibility on the phone.

On a Pixel, open Settings, then Accessibility, then Hearing devices, and turn on Hearing aid compatibility for T mode.

Google says to make sure the hearing aid is set to the same mode that you are using on the phone.

Some Android steps need Android 14 or later, according to Google’s accessibility page.

More than one Apple device

If your hearing aids are paired with several Apple devices, Apple says to change the Handoff setting in Hearing Devices settings when they disconnect unexpectedly.

Apple also says to unpair them from another Apple device first if they do not show up on your iPhone.

For other Bluetooth audio devices, see our guides on AirPods connected but no sound and Pixel Buds not pairing.

Those are for earbuds, so for hearing aids follow the maker’s and your audiologist’s guidance.

When to contact your audiologist or Google

If the hearing aids still will not connect, contact your audiologist or the hearing aid maker.

Google’s page also points to its Disability Support team for other Android issues.

Official sources

Leave a Reply

Your email address will not be published. Required fields are marked *