How To Fix The Huawei P Smart Black Screen of Death Issue

The #Huawei #PSmart is a mid-range Android smartphone model that was released in December 2018. It has a solid build quality made of a plastic body and a 6.21 inch IPS LCD screen having a resolution of 1080 x 2340 pixels. It makes use of a dual rear camera system and a single 16MP selfie camera on the front. Under the hood is the Hisilicon Kirin 710 octa core processor which is paired with 3GB of RAM. Although this is a solid performing device there are instances when certain issues can occur which we will be addressing today. In this latest installment of our troubleshooting series we will tackle the Huawei P Smart Black Screen of Death issue.

If you own a Huawei P Smart or any other Android device for that matter then feel free to contact us using this form. We will be more than happy to assist you with any concerns that you may have with your device. This is a free service we are offering with no strings attached. We however ask that when you do contact us try to be as detailed as possible so that an accurate assessment can be made and the correct solution can be given.  

How To Fix The Huawei P Smart Black Screen of Death Issue

When your phone screen does not seem to work and all you see is black then there’s a possibility that the phone is suffering from the Black Screen of Death issue. When this problem occurs, nothing can be seen on the display but the phone might still be getting notifications, calls, or text messages. There is also the possibility that the device might not be responding or getting notifications at all. If this happened after you dropped your phone or had your device in contact with water  then it’s very likely that this is caused by a damaged hardware component. If this just happened randomly then there’s a possibility that it is caused by a software glitch. Listed below are the necessary troubleshooting steps that you need to do for this particular problem.

Fully charge the phone battery

The first thing that you will need to do is to make sure that the problem is not caused by a drained battery. To eliminate this possibility you will have to make sure that the battery is fully charged.

  • Clean the charging port of the phone using a can of compressed air making sure to remove any dirt or debris stuck in it.
  • Fully charge the phone with a charging cord and wall charger that have been tested to work on another device.
  • If the phone does not charge with a wall charger then try charging the device from a computer USB port.

Once the battery is fully charged check if the Huawei P Smart Black Screen of Death issue still occurs.

Perform a soft reset

Sometimes corrupted temporary data stored in your phone can cause this problem. To eliminate this possibility you will need to restart your phone as this will usually remove the temporary data stored in the phone. 

  • Press and hold the Power and Volume down key for up to 45 seconds.
  • Wait as the device restarts.

Check if the Huawei P Smart Black Screen of Death issue still occurs.

Start the phone in Safe Mode

There are instances when an app you downloaded from the Google Play Store can cause this particular issue. This can be due to bugs present in the app or due to compatibility issues between the app and your phone. To check if this is what’s causing the problem you will have to start the phone in Safe Mode as only the pre-installed apps are allowed to run in this mode. 

  • Power off the phone by holding down the power button for a few seconds.
  • Press and hold the power button and release it when you see the Huawei logo on screen.
  • After releasing the Power key, immediately press and hold the Volume down key.
  • Keep holding the Volume key till the phone completely boots up.
  • Once the phone boots up,  “Safe mode” should appear on the bottom of the screen

If the screen works in this mode then the problem could be caused by an app you downloaded. Find out what app this is and uninstall it.

Wipe the cache partition of the phone

There is a possibility that the cached data stored in the dedicated partition of the phone can become corrupted. When this happens this will usually cause certain issues to occur on the phone. To eliminate the possibility that this is what’s causing the problem you will have to wipe the cache partition of the phone from the recovery mode.

  • Turn off the device.
  • Press and hold the Volume Up button.
  • While holding the Volume Up button, connect USB charger to the phone.
  • Within a few seconds, your phone will boot into the recovery mode.
  • Now, remove the USB charger.
  • Use volume buttons to highlight ‘wipe cache partition’ and use power key to select it
  • Reboot the system once the process is completed

Check if the Huawei P Smart Black Screen of Death issue still occurs.

Perform a factory reset

In case the above steps fails to fix the problem then you should try doing a factory reset in recovery mode. Take note that this will erase your phone data.

  • Turn off the device.
  • Press and hold the Volume Up button.
  • While holding the Volume Up button, connect USB charger to the phone.
  • Within a few seconds, your phone will boot into the recovery mode.
  • Now, remove the USB charger.
  • Use volume buttons to highlight  select wipe cache/factory reset and use power key to select it
  • Reboot the system once the process is completed

Check if the issue still persists. If it does then this might already be caused by a faulty hardware component. The best thing to do right now is to bring the phone to a service center and have it checked.

Leave a Reply

Your email address will not be published. Required fields are marked *