The #Samsung #Galaxy #J4Core is one of the many models of the J series of devices that’s available in the market today. This is a mid range device that uses a large 6 inch IPS LCD display and runs on Android Oreo Go Edition. This means that the apps installed in the phone are optimized to take up less space freeing up more storage room for personal data. Under the hood is a Snapdragon 425 processor paired with 1GB of RAM. Although this is a solid performing device there are instances when certain issues can occur which we will be addressing today. In this latest installment of our troubleshooting series we will tackle the Galaxy J4 Core won’t turn on issue.
If you own a Samsung Galaxy J4 Core or any other Android device for that matter then feel free to contact us using this form. We will be more than happy to assist you with any concern that you may have with your device. This is a free service we are offering with no strings attached. We however ask that when you do contact us try to be as detailed as possible so that an accurate assessment can be made and the correct solution can be given.
How To Fix Samsung Galaxy J4 Core Won’t Turn On
For this particular problem the first thing you will need to do is to make sure that the battery of the phone has sufficient charge. There have been several instances when phone owners have a hard time turning on their device only to find out that it has ran out of charge. Follow the steps listed below to charge the device.
- Clean the charging port of the phone using a can of compressed air. Make sure that any dirt or debris stuck in this port is removed.
- Fully charge the phone using its wall charger.
- In case the phone does not charge then try using a different charging cord and wall charger. You should also try charging the phone from a computer USB port in case charging using the wall charger fails to work.
Once the phone has sufficient charge you should try turning on the device.
Posts you might like
Perform a soft reset
Most issues such as this can usually be fixed by doing a soft reset. This is usually the first thing you will have to do when the phone is unresponsive however this will also work in this case as it will refresh the phone software. This is done by pressing and holding on the power button for a few seconds until the device restarts.
Check if the problem occurs in Safe Mode
There are instances when an app you downloaded can cause this particular problem. To check if this is the case you will have to start the phone in Safe Mode as only the pre-installed apps are allowed to run in this mode.
- Make sure that the device is off.
- Press and hold the Power key past the screen with the device name.
- When ‘SAMSUNG’ appears on the screen, release the Power key.
- Immediately after releasing the Power key, press and hold the Volume down key.
- Continue to hold the Volume down key until the device finishes restarting.
- Safe mode will display in the bottom left corner of the screen.
- Release the Volume down key when you see ‘Safe Mode’.
If the problem does not occur in this mode then it could be caused by an app you downloaded. Find out what app this is and uninstall it.
Wipe the cache partition of the phone
There are cases when the temporary data of the phone software can get corrupted which can result to issues occurring on the device. The best thing to do in this scenario is to wipe the cache partition of the phone from the recovery mode.
- Turn off the phone.
- Press and hold the Volume Up and Home keys.
- Press and hold the Power key until the device vibrates, then release it. Keep pressing the Volume Up and Home keys the entire time.
- When you see the Android Recovery screen, release the Volume Up and Home keys.
- Use the Volume keys to scroll down to Wipe cache partition, then use the Power key to select it.
- Use the Volume keys to scroll down to Yes, then use the Power key to select it.
- Use the Volume keys to scroll down to Reboot system now, then use the Power key to select it.
Check if the issue still occurs.
Perform a factory reset
One last troubleshooting step to consider is a factory reset. This will revert the phone back to its original factory condition and will usually fix the problem in case is is caused by a software glitch. Take note that this will erase your phone data.
- Turn off the phone.
- Press and hold the Volume Up key and the Home key, then press and hold the Power key.
- When the device logo screen displays, release only the Power key
- When the Android logo displays, release all keys (‘Installing system update’ will show for about 30 – 60 seconds before showing the Android system recovery menu options).
- Press the Volume down key several times key to highlight ‘wipe data / factory reset.’
- Press Power button to select.
- Press the Volume down key until ‘Yes — delete all user data’ is highlighted.
- Press Power button to select and start the master reset.
- When the master reset is complete, ‘Reboot system now’ is highlighted.
- Press the Power key to restart the device.
If the phone still does not turn on then this could already be caused by a faulty hardware component. The best thing to do right now is to bring the phone to a service center and have it checked.
Feel free to send us your questions, suggestions and problems you’ve encountered while using your Android phone. We support every Android device that is available in the market today. And don’t worry, we won’t charge you a single penny for your questions. Contact us using this form. We read every message we receive can’t guarantee a quick response. If we were able to help you, please help us spread the word by sharing our posts with your friends.