How To Fix Signal Not Sending A Registration Code (2026)
If Signal never sends the verification code when you register your phone number, the problem is usually the text message or call not reaching your phone, not Signal itself.
Signal’s own troubleshooting page lists a handful of causes, and most of them take a minute to check.
Work through the list below in order, starting with the number you typed.
Quick answer: where to look first
| Symptom | Most likely cause | Fix |
|---|---|---|
| No SMS code | Weak signal, blocked unknown senders, or a carrier opt-out | Check coverage, unblock unknown senders, ask your carrier about STOP or opt-outs |
| No code and no call | Number entered wrong | Enter the full international number without leading zeroes |
| T-Mobile, Metro PCS or Google Fi on T-Mobile | Carrier filters | Ask for the Shortcode Blacklist to be removed, and turn off Scam Block for calls |
| Registered too many times | Too many attempts | Wait before trying again |
| Error 0 on iPhone | Permissions, VPN or Signal version | Update Signal, turn off VPN, enable permissions |
How does Signal registration normally work?
- Install and open the latest version of Signal.
- Accept the Terms and Privacy Policy.
- Enter and confirm your phone number.
- Tap Continue on Android or Next on iPhone, then tap OK to confirm the number.
- Wait for the SMS code.
- If you cannot get an SMS, wait for the timer to count down and tap Call me.
- Enter the code manually if Signal does not detect it.
Your number must be able to receive either an SMS or a phone call.
Never share the verification code
Signal says not to share the verification code with anyone.
Signal never asks you for it, so treat anyone who does as a scammer.
Step 1: check the number and your signal
- Make sure you are within range of your mobile network and can receive SMS.
- Make sure the number can also receive a phone call, since Signal offers a voice call.
- Enter the full international number and leave out leading zeroes.
- Check that you did not block messages from unknown senders.
Signal gives two examples of numbers that trip people up: Rio de Janeiro numbers start with +5521 and Argentina numbers start with +549.
Step 2: check your carrier settings
Ask your provider to confirm you did not reply STOP to unknown senders or opt out of business or transactional notifications.
Signal has extra steps for T-Mobile, Metro PCS and Google Fi on T-Mobile.
| If you want | Do this |
|---|---|
| The SMS code | Call #611# and ask the representative to remove the Shortcode Blacklist |
| The voice call | Dial #632# to turn off Scam Block |
| The voice call on iPhone | Go to Settings, Phone and turn off Silence Unknown Callers |
Step 3: fixes for Android
- Update Signal to the latest version.
- Allow every Signal permission in Android Settings, turn them off and on again, then restart the phone.
- Update the Google Play services app.
- Turn off your VPN, or make sure it allows all traffic on TCP port 443.
- Free up space on the phone’s internal storage, not the SD card, by uninstalling unused apps.
- Exclude Signal from automatic background optimization and let it start on its own.
What if your Android is a Huawei or Xiaomi?
| Phone | Where to change it |
|---|---|
| Huawei | Settings, Apps, Apps, Signal, Power Usage Details, App Launch, set to Manage Manually, then turn on Auto-Launch, Secondary Launch and Run in Background |
| Xiaomi | Security, Permissions, Autostart, allow Signal and Google Play services, or Settings, All, Startup manager, Allow |
Step 4: fixes for iPhone
- Update Signal to the latest version.
- Turn off your VPN or data monitoring app, or make sure it allows all traffic on TCP port 443.
- Check the Unknown Senders inbox in Messages, or turn off Settings, Messages, Filter Unknown Senders.
- Turn on every permission under iPhone Settings, Signal.
If you see Error 0, Signal points you to those first four checks.
Why does Signal ask for your PIN instead of a code?
When you re-register a number you used before, Signal can use a stored token together with your Signal PIN in place of the SMS code.
Signal checks the two together to confirm you were the most recent owner of the number.
The token is useless without the correct PIN.
If you forgot the PIN, tap Skip in the top-right corner to use the normal SMS verification instead.
| Question | What Signal says |
|---|---|
| How often do you enter the PIN here | Only once |
| Does it affect Registration Lock | No, Registration Lock is not affected by this change |
| When does the stored token stop working | When someone completes registration of the number, such as by SMS, or when you delete your account |
| Which token stays valid | Only the most recent one that registered the number |
That last point means a fresh SMS registration replaces any earlier PIN shortcut.
What if Signal says you registered too many times?
Signal says to wait before registering again, giving examples such as one hour or one day.
Repeatedly tapping resend does not shorten that wait.
Why is your message history missing on the new install?
Signal stores messages only on your own devices and keeps no copy.
A new install does not bring back old chats on its own.
Our guide to moving Signal to a new phone and keeping messages covers transfers and backups.
Can you register Signal Desktop with a code?
No, Signal Desktop has to be linked to Signal on an Android phone or iPhone before you can message with it.
Other verification code problems
If a different service is the one not sending codes, see Google verification code not arriving or Apple Account verification code not arriving.