8 Best Motion Sensor Light Bulb in 2024

Motion sensing technology has come a long way since its inception several years ago. Today we can find motion sensors in almost any home product, which not only adds convenience but also acts as an important security layer. This is more so the case with motion sensing light bulbs. Given the number of options available out there, picking the right variant can be quite tricky. Keeping this in mind, we’re going to have a closer look at some of the best motion sensing light bulbs available in the market today.

Best Motion Sensor Light Bulb

Aukora Motion Sensor Light Bulb

This is a handy 12W bulb that can activate itself on motion regardless of the weather conditions. However, a light bulb like this is probably better suited for indoor use. The manufacturer claims that it can be used outdoors as long as the weather remains between 14°F (-10°C) and 95°F (35°C). It offers a lumination of 1000lm, which is reasonably bright as far as light bulbs are concerned. As far as motion-sensing features are concerned, this light bulb uses the PIR infrared sensor to make sure any motion is detected.

This means it can detect motion even in the dark at about a distance of up to 8-10 feet. However, the company claims that you can hang it as high as 10 feet vertically above the ground, and it can still detect motion. One good thing about this light bulb is the fact that it will not activate in the day time, thus saving precious energy. Not that it will take too much power anyway, but it’s good to know that the manufacturer has built a system to conserve energy. This bulb is available in a pack of two on Amazon.

Banord 12W Light Bulb

As far as light bulbs are concerned, most are of the same wattage or capacity. This one too consumes 12W of power, which is relatively decent. In terms of luminance, this light bulb can light up to 1000lm, which is on par with most bulbs in this range. It can turn on at 15 Lux and turn itself off if the illumination is more than 30Lux, thus helping you save power when it’s bright outside. This fits into a standard E26 slot and doesn’t require any additional wiring. This means it’s good to go as soon as it arrives at your doorstep.

Once motion is detected, the light will be turned off after 30 seconds unless there’s movement in the bulb’s field of view. The company recommends installing this bulb facing downwards, while it shouldn’t have any covering or cases on top as this could impact its motion-sensing abilities. This uses a PIR infrared sensor to enable motion sensing features, which is in line with several light bulbs in this genre. This bulb doesn’t have dimming functions, however. The Amazon seller is currently offering this bulb in a pack of 2 units.

Boxlood PIR Motion Sensor Light Bulb

This particular light bulb can be used both indoors and outdoors. It can detect motion at the height of up to 20 feet, although the company recommends mounting this not more than 15 feet from the ground for a clear, unobstructed view of its surroundings. It offers brightness of 1000 lumens and can shut itself off during the day time. Getting a bulb-like this also translates to plenty of savings compared to conventional light bulbs, which makes this an instant choice for many. A bulb-like this can be ideal for dark areas that usually don’t get a lot of movement (for ex: garage or backyard).

This offering uses the PIR infrared sensor to capture motion and turn on the bulb accordingly. The company calls this color “Cool White,” although it shouldn’t perform any differently than the other 12W LED bulbs we’ve spoken about above. You also get to pick from “Warm White” from this particular manufacturer. You can currently buy this in a pack of 2 from Amazon.

Brinks 7120B

This is explicitly meant bigger establishments and outdoors, although it can also be used at homes. It comes with two heads, offering double the illumination of a standard motion sensing bulb. Also unique to this bulb is the 110-degree field of view that it provides, something that not a lot of motion-sensing bulbs can do today. It works on a photocell process wherein it operates only when it’s dark and doesn’t detect movement during the day when illumination is otherwise not needed.

Going into the specifics of the bulbs, this product uses two 120 watts maximum PAR outdoor flood lamps, which are known for their high illumination, but not necessarily their energy efficiency. Since this is meant for bigger surface areas, the energy costs will probably not matter much. Also, thanks to its motion sensor, you can save a lot of money on the offer. Users can choose to use eve or surface mounting to get this attached to a wall or surface.

SANSI LED Security Motion Sensor Outdoor Lights

This is an exceptional outdoor lighting solution and can offer unparalleled illumination, especially in comparison to most outdoor lighting equipment in this price range. It comes with a sharp sensor that can theoretically detect motion at 180 degrees and up to 50 feet. However, the company recommends attaching this bulb at a distance of around 13 feet for optimum performance. Given the brightness that it offers, it may not be a good idea for home use. It can provide a brightness of up to 3600lm despite only using 36W of energy.

If you’re confused about installing this product, well, you will be relieved to know that the company offers all the accessories and tools required to fix it on a surface. It’s worth pointing out that this motion sensing light bulb by SANSI is also resistant to water so that it can run on its own regardless of the weather around you. The company also offers 5-years of “unlimited” warranty. This particular is also available in a smaller package that uses 30W of energy instead of 36W.

First Alert PIR725

This isn’t a light bulb but in-fact a socket that enables motion-sensing features to your ordinary bulb. So you can use your existing bulbs with this product, which is the level of customization that not every bulb manufacturer offers. It can theoretically turn on when you walk into the room and turn off when you leave the room, which is saving you the trouble of turning off the switch. This can work with any incandescent bulbs up to 100W and compact fluorescent bulbs of up to 50W.

It can plug into your standard bulb socket, while the bulb can be attached firmly onto the motion sensor. This is a cost-effective way of enabling motion sensing by enabling the bulbs you already have. To make things better, it only costs about half as much as a standard motion sensing bulb. Be sure to check out this product on Amazon.

Sengled LED with Motion Sensor

This is an easy to install motion-sensing bulb that doesn’t require a lot of knowhow to understand. It comes with LED illumination with a brightness of 806lm, which isn’t mainly the brightest on this list. However, since this is supposed to be a “Soft White light,” the lack of brightness was perhaps by design. It must be noted that despite its versatility, this light bulb cannot be used on fixtures that already have a motion sensor attached. You have to plug this into an empty bulb socket.

The bulb can detect motion at up to 30 feet and remain illuminated for 90 seconds unless a motion is detected. This bulb has been rated to last 25,000 hours in its lifetime while it will reportedly consume just 0.2W of power while on standby. Keeping this in mind, this appears to be an excellent replacement for conventional light bulbs. The company offers this in a pack of 2, while a single pack is also available.

Govee Motion Sensor Light Bulb

This is a slightly smaller LED motion sensing bulb meant for the indoor environment. It comes with a brightness of 450lm, which isn’t the best out there, but considering the setup, this is intended for, we don’t see this as a concern. Despite being small in size, it can illuminate a standard-sized room comfortably. It can detect movement at 360 degrees offer coverage of 16 to 26 feet.

In the company’s words, this bulb can produce lumination that is equivalent to 50W bulbs in the market. The bulb will automatically turn on when it detects the light intensity to be falling to or below 15Lux.

The light will stay on for 30 seconds once illuminated and will turn off if there’s no motion detected. As far as installing this is concerned, it’s a simple plug and play unit, allowing you to buy no additional accessories or wiring to set it up. All you have to do is find a light bulb socket that works, and you’re good to go.