Bosch eBike Error Codes And What They Mean (2026)

When a Bosch eBike display shows a three-digit number, the drive system has detected a fault and is telling you which part to look at.

The codes below come from the Bosch Intuvia (BUI255) US owner’s manual, and most of them end with the same advice: restart, then see a dealer.

Your display may be a different Bosch model, so check its own manual if a number is not listed.

Quick answer: what to do when a code appears

StepAction
1Stop riding safely and switch the eBike system off.
2Switch it back on and see whether the code returns.
3Look up the number in the tables below.
4If Bosch says “contact dealer”, take the bike to an authorized Bosch dealer.

What a fault code means for your ride

The Intuvia manual says the eBike’s components are monitored continuously, and a fault code appears when one is detected.

Depending on the fault, the drive may switch off automatically.

You can keep riding without drive assistance, but Bosch says to have the eBike checked before further trips.

How to restart the eBike system

The manual does not describe a separate reset, so a restart means switching the system off and on.

ActionWays Bosch lists
Switch offPress the computer’s on/off button, switch off the battery with its button, or remove the computer from its holder
Switch onPress the computer’s on/off button briefly with the computer and battery inserted, or press the battery’s on/off button with the computer in its holder
Automatic shut-offAfter about 10 minutes with no drive power draw and no button presses

Reading the battery indicator before you blame a code

A low battery can look like a problem, so check the charge bars on the computer first.

IndicatorWhat Bosch says it means
Each barAbout 20% of battery capacity
Few barsThe battery should be recharged
All bars offDrive capacity is used up and assistance switches off gently
Flashing indicatorEnough capacity left for about 2 hours of lighting, not counting other loads

When the drive capacity is used up, the remaining charge still serves the lighting and the computer.

Display blank or not responding

Bosch lists a blank display as an internal fault of the on-board computer.

The manual’s fix is to restart the eBike system by switching it off and on.

Codes that ask you to restart

These codes are internal faults, and Bosch’s first step is a restart, with a dealer visit if the code persists.

CodeMeaning
419, 531, 593Configuration error
426Internal time-out error
431, 580Software version error
440, 500, 511Internal drive unit fault
450Internal software error
510Internal sensor fault
602, 603, 640Internal battery fault
610Battery voltage error

For code 426, the manual adds that wheel circumference cannot be viewed or adjusted in the basic settings.

Button codes 410 and 418

Code 410 means the on-board computer buttons are disabled, and code 418 means the operating unit buttons are disabled.

Bosch’s remedy for both is to check for stuck buttons, for example from dirt, and clean them if needed.

Connection codes: 414, 422, 423 and 424

CodeProblemBosch action
414Operating unit connection problemHave connections checked
422Drive unit connection problemHave connections checked
423eBike battery connection problemHave connections checked
424Communication problem between componentsHave connections checked

Battery codes: 530, 591 and 655

For code 530 (battery fault), Bosch says to switch off, reinsert the eBike battery and restart.

Codes 591 (authentication error) and 655 (multiple battery faults) have the same step: switch off, remove and reinsert the battery pack, then restart.

Reinsert it only the way the bike’s holder is designed to take it, and never open the battery pack.

Temperature codes 540 and 605

Code 540 is a drive unit temperature error, and code 605 is a battery temperature error.

Bosch says to switch off and let the part reach a permissible temperature before restarting.

Speed sensor and light codes

CodeProblemBosch action
502Bike light faultCheck the light and its wiring, then restart
503Speed sensor faultRestart; contact a dealer if it persists
504Speed signal distortion detectedCheck and adjust the spoke magnet position; assistance is reduced

Other codes in the manual

CodeMeaningBosch action
430On-board computer internal battery flatCharge the computer in its holder or by USB
460USB port errorRemove the cable from the USB port
490Internal fault of the on-board computerHave the computer checked
550Impermissible load detectedRemove the load and restart
592Incompatible componentUse a compatible display
595, 596Communication errorCheck the drive wiring and restart
606External battery faultCheck wiring and restart
620Charger faultReplace the charger and contact a dealer
656Software version errorContact a dealer for a software update
7xxThird-party component errorFollow that component maker’s instructions

Care rules from the manual

  • Remove the battery before any inspection, maintenance or repair.
  • Do not open components, because service belongs with an authorized Bosch eBike dealer.
  • Keep battery pack contacts and holder contacts clean.
  • Clean with a soft, damp cloth, and do not submerge parts or use a pressure washer.

Charging safety if the battery or charger is involved

Bosch’s charger manual warns to charge only Bosch eBike batteries with an approved Bosch charger.

  • Do not leave the battery unattended while charging, especially overnight.
  • Charge in a dry, well ventilated place that has a smoke detector.
  • Never open the charger, and stop using it if the cable or plug is damaged.

The manual also says an unapproved or counterfeit charger can cause serious injury.

When to contact a Bosch dealer

If a restart does not clear the code, the manual repeatedly points to an authorized dealer.

Write down the code, when it appeared and what you were doing, because that helps the shop find the fault.

If the battery itself is the problem, read how to fix a Bosch eBike battery that will not charge.

Other charging problems are covered in how to fix a Nest camera battery that will not charge.

Source: Bosch Intuvia BUI255 owner’s manual and the Bosch BPC32 and BPC34 charger manual.

Leave a Reply

Your email address will not be published. Required fields are marked *