Archives for

can’t browse

What to do when your Samsung Galaxy Note 5 has No Data when Connected to Wi-Fi

Even today’s high-end devices are not free of wireless connectivity issues. As a matter of fact, online forums and websites are flooded with posts from a number of smartphone users reporting various issues tied to the Wi-Fi feature of their respective devices, including those who own the Samsung #Galaxy Note 5. One of these reported issues is about the #Note5 that has no data when connected to a wireless (Wi-Fi) network. And this is what we tackle in this post.


After digging through some relevant sources, we have managed to come up with this comprehensive piece, containing a few helpful tips on what to do if your Galaxy Note 5 device can connect to a Wi-Fi network but unable to get through the Internet or there’s no data received. For example, your phone is connected to the Wi-Fi but you cannot browse any website and/or sync online accounts.

The following methods are deemed as general workarounds used by many device owners to deal with no data issues on their respective devices, including the Note 5 variant. You too can try any of these methods, if necessary.

  1. Check the Signal Strength and ensure your phone is getting enough strength to acquire a good signal. Remember, the more bars you see, the better the signal your phone can get. If you see only two bars of signal strength or fewer, try to move your device closer to the wireless router.
  2. Eliminate potential interference. Some home appliances such as microwave ovens and cordless phones can cause interference between your phone and wireless networks that might be in range. If you see any of these devices near your phone, try to turn them off temporarily or move them farther away and see if it’ll fixed the problem. Or if you’ve got the guts, you can change the router or access point settings to use a different wireless network instead. You can also set the network channel to be selected automatically if it’s set to a fixed network number as some channels work better than the other.

If you need further assistance in configuring your wireless router settings, please contact your device manufacturer (OEM) or Internet Service Provider (ISP).

  1. Double-check Physical Connections/Wirings (if applicable). In case you are using Ethernet cables, DSL/cable connections, and the like, then it’s likely that the network (internet connection) problem is due to a loose physical connection.

In this regard, double-check all the connections from and to your router, and/or high-speed modem (if available). Make sure all cable connections are properly secured.

  1. Power-cycle your wireless router or high-speed modem. The process is the same as turning the device off for a few minutes, and then turning it back on. The method is referred to as soft reset, on smartphones. Performing this method will restart and refresh your router/modem, allowing it to re-establish network connections. In case you need help in the process, here’s how to power cycle a wireless router or high-speed modem:
  • Locate the power switch on your router or modem. If a power switch isn’t accessible, then just disconnect the power cord from the back.
  • Wait for 1-2 minutes and then turn the router/modem back on. Otherwise, simply reconnect the power cord, if you disconnected it from the back of the router and/or modem.
  • After the router and/or modem reboot, try to connect your phone to your wireless network and see if it’s already able to receive data.
  1. Isolate the problem. To determine if the problem is with the router/modem, try to connect with another wireless device. If neither device has no data or can’t connect to the Internet, then it implies that the problem is most likely with the router or modem. In this case, please contact your Internet Service Provider for further assistance and recommendations.

There are also some instances when a wireless router is configured to allow a limited number of simultaneous connections. In order to prevent any unwanted connection, MAC filters are entrenched into some networks.

To see if this is what’s causing you trouble, then please contact your Internet Service Provider (ISP) or the device manufacturer for further support.

What is MAC Filtering and how does it affect your phone’s Wi-Fi feature?

MAC filtering is a security method implemented on some networks for added protection against infiltrators. It works by filtering MAC addresses of each device, and grants network access to only those devices that have been included in the access list. Each device with wireless transmitter possesses a unique identifier referred to as MAC address. To eliminate this factor from the potential culprits, please contact the device manufacturer or your Internet Service Provider and have them add your phone to the MAC filtering list (if necessary).

You can locate the MAC address on your device by navigating to this menu: Apps->Settings->About device->Status->Wi-Fi MAC address.

  1. Verify wireless configurations by navigating to your phone’s Wi-Fi settings menu.

Here’s how: Tap Apps->Settings->Wi-Fi, and then toggle the switch to disable Wi-Fi for a moment. Afterwards, toggle the switch to turn it back on. Once Wi-Fi is re-enabled, open a browser on your phone and try to navigate to a website. See if it goes through this time, else, try another workaround.

  1. Forget Network and Reconnect. If the problem occurs while using a previously connected wireless network or known Wi-Fi network on your device, try to disconnect from that network and then connect again. Here’s how it works:
  • Tap Apps from Home.
  • Tap Settings.
  • Tap Wi-Fi to get to your phone’s Wi-Fi menu.
  • Touch and hold the name of the network you’re currently connected to, and then tap the option to Forget
  • Wait for a few moments and then tap the network name again.
  • If you see a secured network icon (lock), you need to enter the correct password to gain access to that network. To ensure you’re typing in the correct password, tap the option to Show password. Each character displays as you type.
  • Finally, tap Connect to connect to that network again.
  1. Update to the latest Software Version available. Another common recommendation is to update your device to the latest software version available.

To check for available updates on your phone, navigate to Apps->Settings->System->About device->Software update->Check for updates->OK. If a system update is available, simply follow the onscreen instructions to download and complete the update installation.

Note: To avoid potential data loss during the software update process, we strongly suggest you back up all your important data before you start. Bear in mind that once the update has been completed, you won’t be able to downgrade the software.

  1. Check for Network outages. One more thing you need to consider, that might as well affect your Internet connection is a network outage. If all of a sudden, your devices are unable to connect to the Internet or can connect but no data, then there might be a network service outage. Contact your Internet provider and have them check for any possible outages that might be affecting network services in your place.

Connect with us

We are always open to your problems, questions and suggestions, so feel free to contact us by filling up this form. This is a free service we offer and we won’t charge you a penny for it. But please note that we receive hundreds of emails every day and it’s impossible for us to respond to every single one of them. But rest assured we read every message we receive. For those whom we’ve helped, please spread the word by sharing our posts to your friends or by simply liking our Facebook and Google+ page or follow us on Twitter.

How to fix various Samsung Galaxy S6 Edge Wi-Fi Problems (random disconnection, greyed out switch, can’t browse & more)

I have compiled the most common Wi-Fi problems that Samsung Galaxy S6 Edge (#Samsung #GalaxyS6Edge) owners encountered and reported. There are five issues I tackled in this post and while I specifically mentioned the name of the device in the title, the #troubleshooting procedures I cited here may also work with other #Android devices. So, if you’ve encountered or have been bugged by a Wi-Fi problem recently, you might want to take a little time reading or skimming through this post to see if your concern is among the ones I addressed. Here’s the list of the problems you can find here…

For those who are trying to find a solution to a different problem, then visit the troubleshooting page we carved out for the S6 Edge. You can find a lot of problems in that page; find ones that are related to yours and use the solutions we suggested. If they didn’t work, then you may fill up this questionnaire and hit the submit button to contact us.


Wi-Fi randomly disconnects and reconnects after a firmware update (Verizon)

Problem: I have a new Galaxy S6 Edge that I updated just recently and so far, not so good because ever since the update was installed, the Wi-Fi in my phone was totally messed up. It can connect to any network but then the connection drops out and leaves me with nothing; no email, can’t browse, etc. It is very annoying and I really can’t use the device to its full potential with this kind of problem. If you could help me figure out what the problem is, I would be very grateful. Thank you in advance.

Troubleshooting: Since we are dealing with a problem that occurred after an update, then you must clear all system caches first as some of them may have been corrupted during the process. After that, try to observe your phone closely if the problem still occurs and if so, disable the Smart Network Switch. Follow the instructions below:

Wipe Galaxy S6 Edge Cache Partition

  1. Turn off the device.
  2. Press and hold the following three buttons at the same time: Volume Up key, Home key, and Power key.
  3. When the phone vibrates, release the Power key but continue to press and hold the Volume Up key and the Home key.
  4. When the Android System Recovery screen appears, release the Volume Up and Home keys.
  5. Press the Volume Down key to highlight ‘wipe cache partition.’
  6. Press the Power key to select.
  7. When the wipe cache partition is complete, ‘Reboot system now’ is highlighted.
  8. Press the Power key to restart the device.

Disable Smart Network Switch

  1. Swipe down from the top of the screen with one finger.
  2. Tap the Settings icon on the upper-right corner.
  3. Tap the WiFi icon.
  4. Tap the Menu icon on the upper-right corner of the screen.
  5. Choose Advanced from the drop down.
  6. Uncheck the box next to “Smart network switch.”

I hope this helps.

On/Off switch greyed out, Wi-Fi is always On (ATT)

Problem: For some very weird reason the On/Off Wi-Fi switch in my phone is disabled and the Wi-Fi is always on but I really can’t get a good connection; sometimes it connects with a very slow connection but most of the time it just won’t. Even if I go to an area with a different Wi-Fi network, my phone won’t disconnect from my home network and connect to a familiar one. I badly need your help guys. Why is this happening and how can I fix it? By the way, my phone is a Galaxy S6 Edge. Thanks.

Troubleshooting: It’s probably just a glitch that affected the device’s radio services. If you happen to download a firmware update, I suggest you follow the procedure on how to wipe the cache partition above. Glitches that occur after an update are often caused by corrupt caches.

If there was no update or if wiping the cache partition didn’t fix the problem, then try booting your phone in safe mode and from there, try to see if the Wi-Fi switch is enabled. If so, try turning if off and restart to normal mode. It should work after that. However, if it’s still disabled, then you have no other choice but to backup all your data and perform a master reset. Follow the procedures on how to boot in safe mode and do the master reset below:

How to boot Galaxy S6 Edge in safe mode

  1. Turn off your Galaxy S6 Edge.
  2. Press and hold the Power key.
  3. When ‘Samsung Galaxy S6 Edge’ appears, immediately release the Power key and then press and hold the Volume Down button.
  4. Continue holding the Volume Down button until the phone finishes the restart.
  5. When you see Safe Mode on the lower left corner of the screen, release the button.

Perform master reset on Galaxy S6 Edge

  1. Turn off your Samsung Galaxy S6 Edge.
  2. Press and hold the Volume Up, Home and Power keys together.
  3. When the device powers on and displays ‘Power on logo’, release all keys and the Android icon will appear on the screen.
  4. Wait until the Android Recovery Screen appears after about 30 seconds.
  5. Using the Volume Down key, highlight the option, ‘wipe data/factory reset’ and press the Power key to select it.
  6. Press the Vol Down button again until the option ‘Yes — delete all user data’ is highlighted and then press the Power key to select it.
  7. After the reset is complete, highlight ‘Reboot system now’ and hit the Power key to restart the phone.

Connected to a Wi-Fi network but cannot browse or download apps (Sprint)

Problem: This problem actually just started today. My Galaxy S6 Edge is somehow connected to my Home Wi-Fi but it couldn’t connect to the internet. Did you get what I mean? I can’t browse using the Internet app, my emails don’t come in and I haven’t received one since the morning, I can’t do Facebook, no Twitter either. It started without any cause or something and it started in the morning when I woke up. Help me. Thanks.

Troubleshooting: Well, first of all, reboot your phone. Some services may have crashed for some reason and they might have caused the problem. Rebooting will refresh your phone’s memory as well as start up necessary services. If that didn’t work and if there was no other significant events that may have led to this issue, then the problem might be in your network. But the thing is all you can do to troubleshoot your network is to turn off your modem and/or router. So please, do that to see if that could make a difference.

You could also further verify if the problem is with your network by trying to browse the internet using your other devices such as laptop, computer, other smartphones, etc. If they can connect just fine, then the issue is with your phone. Try “Forgetting” your Home network in your phone and let it detect and connect to it. However, if you other devices couldn’t connect either, then you should probably call your Internet service provider.

Phone can’t connect to home Wi-Fi network after an update (T-Mobile)

Problem: It’s just weird because after the recent update to my S6 Edge, the device can no longer connect to my home network. Apparently, it could connect before the update because I used my network to download it but the moment it rebooted, it just keeps saying “Obtaining IP address” and won’t actually connect. How come my phone was messed by an update? Please help me guys. Thanks.

Troubleshooting: I understand the phone rebooted itself after the update was installed but try to reboot one more time to see if that would make a difference. If it didn’t, then you should try the procedure I cited in the first problem–wipe the cache partition.

It is apparent it’s a glitch in the firmware and if it were minor, then wiping the cache partition would take care of it, otherwise, you really have to perform a master reset, although I also want you to reboot your network equipment.

Apps automatically update if phone is connected via Wi-Fi (ATT)

Problem: I am always connected to Wi-Fi even at work but there are always time in a day wherein I connect via mobile data. But my problem is my apps automatically update themselves when I’m connected to Wi-Fi without my consent. This phone, an S6 Edge, has been with me for a couple of weeks and I’m still trying to learn more about it since I was with a Windows phone for a long time. So, to sum it up, I really don’t know how to disable the auto update thingy. Can you help me?

Troubleshooting: As part of being “smart” your phone can be set to update its apps automatically when to connected to Wi-Fi or mobile data or not at all. Basically, all you have to do is set the phone to not update its apps so all future updates will be initiated by you. To cut to the chase, here’s the procedure how to do it:

  1. From the Home screen, tap Apps.
  2. Tap Play Store.
  3. Tap the Menu key.
  4. Choose Settings.
  5. Now, tap on Auto-update apps.
  6. To disable automatic application updates, tap Do not auto-update apps.

Connect with us

We are always open to your problems, questions and suggestions, so feel free to contact us by filling up this form. We support every Android device available and we are serious in what we do. This is a free service we offer and we won’t charge you a penny for it. But please note that we receive hundreds of emails every day and it’s impossible for us to respond to every single one of them. But rest assured we read every message we receive. For those whom we’ve helped, please spread the word by sharing our posts to your friends or by simply liking our Facebook and Google+ page or follow us on Twitter.