Samsung Galaxy Note 2: Problems, Questions, Solutions, Fixes [Part 4]

samsung galaxy note 2

This is the fourth part of our Samsung Galaxy Note 2 Problems series and hundreds of questions are yet unanswered. Ten questions / problems have been answered in this post and we will continue posting articles like this to support owners who probably don’t want to spend hours on the phone talking to a representative who is unwilling to help. In case your problem wasn’t mentioned in this post, check out the first three parts of this series.

Samsung Galaxy Note 2: Problems, Questions, Solutions, Fixes [Part 1][Part 2][Part 3]

We will do everything to help our readers and we will use all possible media to do that. So, if you have problems, questions, suggestions and clarifications, you can ask us through our Facebook Page, Google Plus Community, subscribe to our newsletter or email us at [email protected].

Note 2 won’t come on after charging

Problem: Hi, my Note 2 was working fine but I connected it to a charger over night and in the morning it froze. After I removed the battery and replaced it the power does not turn on. If I keep the power button pressed then the small red light next to camera flashes for 1 sec and nothing happens. I tried a different battery but no response. Even showed it to a tech and he said “no issues with the hardware except there is no power coming to motherboard.” Is direct wire connection from power source to the board the only solution?Saj

Answer: If it was the technician who suggested there is a need to hardwire your phone then probably knew what the problem really was. But I think this problem is more than just a software glitch; it must be a hardware problem. And since it’s about the phone not powering up, you should set your focus first on the power sources.

Try to plug your phone to your computer and see if the computer can detect it and that the phone would charge. While connected to the computer, power on the phone normally. If it wouldn’t respond, press and hold the Power button. If that doesn’t work either, try booting up to Recovery Mode–press and hold the Volume Up, Home and Power buttons for at least 7 seconds. If any of these procedures don’t work, try a different battery and repeat these procedures.

Before you go any further, by the way, try to inspect the receptors in your phone. If one of them is crooked, try fixing that first to make sure each receptor touches the interface of the battery.

But I don’t quite understand what you meant by “direct wire.” If the phone is already out of warranty and you have thought of something that could fix or remedy this problem, then it’s worth-doing but at your own risk. I would still recommend you bring the phone to an authorized Samsung technician to have it checked properly.

Related posts:

Fring app won’t load anymore on Note 2

Problem: Hello dears. I use Fring for VOIP.  It used to load very fast on my Samsung Galaxy Note 2. But for the last 5-6 months, it take ages to load and in 99% cases it gives error message “Fring is unable to load… Report, Cancel, OK.” after 10-15 minutes of wait. This app works fine on Nokia E72 and Google Nexus 7 (2013). I tried translation of application many times but the result was same.

Note: only this application is giving the trouble out of 160 installed apps.  — Ashfaq

Answer: In that time span, I am pretty sure you have updated your phone to a higher version of Android and if that’s the case, it’s a compatibility issue. When a new version of Android is released by Google developers, app developers would usually adapt and build updates for their apps. Try going to your list of Apps in Google Play and see if there’s an available update for Fring. You need to be sure about this so even if there’s no available update, you need to uninstall and reinstall the app. But before you do that, here are some things you need to do:

  1. Tap Force Close first.
  2. Tap Clear Cache, then Clear Data.
  3. Go back to your App drawer and launch Fring. See if it still takes forever to load and return and error at the end. If so, then proceed with reinstallation of the app.
  4. Tap Uninstall button.
  5. Reboot the phone.
  6. Launch Google Play Store and find Fring.
  7. Download and install the app.

After doing this procedure and the app still gives you an error, email the developer of the app and make a detailed report. The app may just need some updating.

Turn off auto-correct feature on Note 2

Problem: Hi, I’m running OS 4.3 on my Note 2 and have a problem with the spell checker.  It’s auto-correcting words for me that are already correct, so I have to go back & fix them.  I’ve had this problem with previous Android phones & have gone to the Settings menu & turn off the auto-correct feature. But I can’t find it now. Is there a way to turn off auto-correct & if so, how? Thanks.Betty

Answer: Actually, you’re not the only one who emailed my about this problem. While the predictive text is a useful feature, I don’t know why it’s so messed up nowadays. More often, the words entered are the ones you really don’t want to use. There was a time I supposed to type ‘and’ but the word that was entered was ‘anal’. I seldom use the predictive feature now, it can screw you sometimes.

By the way, I’m not sure what keyboard you’re using but try this:

  1. From the Home screen, tap the Menu key.
  2. Choose Settings and tap My Device tab.
  3. Tap Language & Input, then Input Methods.
  4. Inside Keyboards, you’ll see Default and Samsung Keyboard.
  5. Tap the wheel beside the keyboard you’re using.
  6. Below the Predictive text is Auto Replacement, turn that option off.

If you can’t find the setting to turn predictive feature off, try using a different keyboard app if you desperately need to turn it off.

Transfer saved pages from Note 2 to computer

Question: Hi, how do I copy or transfer internet saved pages from my Samsung Galaxy Note 2 to my PC with or without Kies?Johan

Answer: Just remember the name of the folder or directory where you saved those pages. Connect your phone to your computer and just copy the folder that contains all your saved pages. In your computer, open the folder and look for a file that has either “.html” or “.htm” extensions and just open it normally. The downside of this is that you need to connect your phone every time you want to copy saved pages.

There is an easy way to do it especially when you use Firefox on your Note 2. All you need to do is sync the Firefox application on your phone to the Firefox on your computer and you can view the pages or sites on your PC without connecting your phone via a cable.

In case you’re using Google Chrome on your PC, you can also use Android2Cloud app. It is a free app from the Play Store and let’s you share pages from your Note 2 to your PC wirelessly. You just need to install this 2Cloud extension on Google Chrome on your PC. Please leave every setting on default.

Once the extension has been installed, launch the Play Store on your phone and search for 2Cloud app and install it. When browsing and you want to transfer the page you’re viewing, you just need to pop your share menu, tap Share Page and share via android2cloud. This will transfer the page to Google Chrome on your computer.

Alternatively, you use bookmark importer apps–there’s a bunch of free ones on the Play Store.

Make Wi-Fi primary connection on Note 2

Problem: First, thank you for your column it has be enjoyable to read and I have learned a lot. My current problem with my Note 2 is, since the 4.3 update. Going from cellular mobile data network (4G/LTE) AT&T to WiFi. Before 4.3 update, all I had to do was turn on my WiFi and the Note 2 would change over to WiFi from mobile data network. The 4G/LTE emblem on top notification bar would change over to WiFi emblem. After 4.3, the only way I can connect to wifi is to go to setting, then other networks, then turn off mobile data network, then go back and turn on the wifi and it would connect instantly. So that about the extent of my problems from the 4.3 update. Any suggestions or fixes you may have would certainly be appreciated! Thanks again.Don

Answer: There must be one setting that was messed up. To make your Note 2 connect to your WiFi network when it’s turned on, here’s what you need to do:

  1. From the Home screen, tap the Menu key.
  2. Tap Settings, then Connections tab.
  3. If necessary turn the WiFi on first, then tap WiFi.
  4. Tap the Menu key, then choose Advanced.
  5. Check the box beside ‘Auto network switch.’

I hope this helps your problem.

Related posts:

No ringtone for some contacts on Note 2

Problem: Howdy, love the Note 2 Q&A articles! Between my friends and I, we have 4 Note 2s. One of them seems to have randomly stopped doing text ringtones for only some contacts but not others. None of the contacts have special tones. They are all the standard whistle. We found a workaround at first by using a 3rd party text program but even with that its started back up again. The amount of texts in the log seems to have no bearing on the random contacts its picked.  I am at a loss at this point. Any ideas what could cause this? (No rooting no massive altering apps installed. Running AT&T newest update). Thanks for any help!Riggs

Answer: I would assume at this point that you have checked all settings were correct, the volume of the phone was set to an audible level and that the phone was set to emit sound when a text message is received. So, the first thing I would look into if this were my phone is the messaging app. You said you already used a 3rd party text app to remedy the issue but the problem still persists. For now, try to uninstall that app and focus on the stock app. Go to the Messaging app manager, force close the app and clear its cache and data. You may lose your settings and some of your data when you do this but it’s worth it.

If such procedure won’t solve the problem, we have to other choice but to bring the phone back to its original or default settings and if there’s an available firmware upgrade available, you would have to download and install it to update your phone.

Font not supported on Note 2

Problem: Recently I have updated 4.3 on my Note 2 via WiFi. I could not change my language font after updating. So I down load again my Font App. When I choose to use that font style the following message appear. “This font is not supported. Contact the font provider. Uninstall this font.” This was not happened in my previous version. Can you help? Regards.

N.B. The font I want to use is (zawgyi one flip font), Burmese language font.  — Thet

Answer: You’re not the only having this problem. It seems like Android 4.3 doesn’t support many of the custom fonts that can be downloaded and installed free on the Note 2. We really can’t do anything about this issue as it is up to the developer of the font to adapt to the evolution of Android and release updates. But have you tried iFont?

SIM card unmounts automatically on Note 2

Problem: I have had my note 2 for about a month. Bought new and updated to 4.3 then I rooted it. Now when ever the battery gets low my SIM card unmounts and it has trouble charging and unless I turn it off for 20 to 30 minutes it will reboot until I remove the battery. Is this fixable? Thank you!

Answer: I am also guilty of rooting my smartphones even if they were one-day old. I’m sure if the problem is because of the rooting but you haven’t mentioned any significant procedures except for the 4.3 update and rooting. So, the first thing I would have to ask you to do is to unroot your phone and see if that solves the problem. After all, rooting would take just a few minutes to do.

If unrooting doesn’t solve the issue, try doing a factory reset just to bring the phone back to its original settings. As to the unmounting of the SIM card, I am sure the weak flow of electric current causes it.

When the phone boots up, there is a series of services the phone needs to run first before reading the SIM card and when it’s about to shut off due to battery deficiency, SIM card and network services are among the first ones that would be shut off because they eat up battery more than any other services.

Note 2 problems while playing music

Problem: Hi Droid Guy. I have a problem with my Galaxy Note 2 since I upgraded to 4.3 when I play music some tracks sometimes sound like a scratching disk playing and the music player in terms of sending music files is just a mission because I have to then search music folders to find the correct album where else the older version was user friendly because you could just send them from the music player. Any suggestions regarding this?

Answer: Sounds like it’s a compatibility issue between the stock music app and the new version of Android. It could also be a few corrupt data, so to start troubleshooting, go to the Application Manager and find Music. Force close the app and clear both its cache and data. Launch the app again and check if the problem still persists.

If clearing the cache and data won’t work, boot the phone to Recovery Mode and wipe the cache partition and then reboot the phone. This procedure will clear all cached data store in your phone’s memory but don’t worry, caches of the apps will be created once you launch each one of them.

In case the second procedure doesn’t work either, you must consider performing a factory reset to bring the phone back to its original settings. Also, try to listen carefully if the scratches happen only at a certain period of time because the music track may be the one with the issue and not your phone.

Note 2 android.process.acore has stopped

Problem: I am having issues with my phone. The message “Unfortunately, the process android.process.acore has stopped.” Keeps popping up on my display and it will not go away. I click “ok” but it keeps re-popping up and will not stop. I can no longer use my phone for its intended purpose. Please help!Zack

Answer: The question is, what happened to the phone before this error message started to pop up and bug you? The error message is telling you that the core process that makes Android run on your phone has stopped working. Consequently, you cannot use your phone because the operating system cannot run. This issue is equivalent to the ‘boot failure’ error message on your computer.

If you installed a third-party firmware or custom ROM on your phone, this message means the installation was corrupt or not completed. Flash the firmware again and see if this problem would be fixed. You also need to double-check that the integrity of the package you downloaded was intact, otherwise, some file may have been missing.

Moreover, there could be a third-party app that caused this error. Boot to safe mode and remember the apps you recently installed. Disable them one by one and you may need to uninstall the app that’s problematic.

Lastly, if all else fails, perform a factory reset to bring the phone back to its original settings.

Engage with us

Feel free to send us your questions, suggestions and problems you’ve encountered while using your Android phone. We support every Android that is available in the market today. And don’t worry, we won’t charge you a single penny for your emails. Email us via [email protected] any time. We read every email but can’t guarantee a response. Lastly, if we were able to help you, please help us spread the word by sharing our posts with your friends or subscribe to our newsletter. Thanks.

One Reply to “Samsung Galaxy Note 2: Problems, Questions, Solutions, Fixes [Part 4]”

  1. using a gift samsung galaxy note 2 from saudi made in korea then a night before it happen to shut off, i charge then tried opening the other way, it does not work to open… as if i charge doubting it was low battery?_ cj_louie

Comments are closed.