Real fix for Chrome has stopped error on Galaxy S10 | troubleshoot “Unfortunately, Chrome has stopped”

Are you having trouble with your Google Chrome app? This post will help you deal with Chrome has stopped error on your Galaxy S10. Find out the specific troubleshooting steps that you can try to address this bug below.

Real fix for Chrome has stopped error on Galaxy S10 | troubleshoot “Unfortunately, Chrome has stopped”

Google Chrome is one of the stable applications you can have on your Samsung Galaxy. However, just like any other app, it is not perfect and may encounter bugs from time to time. In this troubleshooting article, we help you fix Chrome has stopped error.

Chrome has stopped fix #1: Restart Chrome app

Chrome has stopped error is usually temporary and fixed most of the time by force quitting the app itself. If you haven’t tried this yet, make sure to do so as your first troubleshooting step. A lot of app errors are caused by minor bugs that usually go away after closing the app. There are two ways to do this.

Method 1: Close an app using Recent Apps key

  1. On your screen, tap the Recent Apps soft key (the one with three vertical lines on the left of the Home button).
  2. Once the Recent Apps screen is shown, swipe left or right to look for the app. It should be here if you managed to run it previously.
  3. Then, swipe up on the app to close it. This should force close it. If it’s not there, simply tap the Close All app to also restart all apps.

Method 2: Close an app using App Info menu

Another way to force close an app is by going within the app’s settings itself. It’s a longer way compared to the first method above but it’s equally effective. You want to use this method if you plan on doing other troubleshooting for the said app like clearing its cache or data. Here’s how it’s done:

  1. Open Settings app.
  2. Tap Apps.
  3. Tap the More settings icon (three-dot icon, upper right).
  4. Tap Show system apps.
  5. Find and tap the app.
  6. Tap Force Stop.

Chrome has stopped fix #2: Perform a soft reset

Doing a soft reset should be the next troubleshooting step if force closing the app won’t work. Soft reset is another form of restarting your device by simulating the effects of a “battery pull.” You must do this in order to clear the RAM and refresh the system in general. To do that, simply press and hold the Power and Volume Down buttons for about 10 seconds. Once the phone has restarted, release the buttons. This is usually effective in clearing bugs that developed when a system is left running for some time. We suggest that you restart your S10 using this method at least once a week to lessen the chances of bugs.

For some Galaxy S10, there may be a slightly different way to arrive at the same method. Here’s how:

  1. Press and hold the Power + Volume Down buttons for approximately 10 seconds or until the device power cycles. Allow several seconds for the Maintenance Boot Mode screen to appear.
  2. From the Maintenance Boot Mode screen, select Normal Boot. You can use the volume buttons to cycle through the available options and the lower left button (below the volume buttons) to select. Wait for up to 90 seconds for the reset to complete.

Chrome has stopped fix #3: Update Google Chrome

Some bugs are fixed by updates alone. It is for this reason that you want to keep

Android and all apps up-to-date. If the problem started out of the blue, keeping your Google Chrome app updated  is not a bad idea in this case. If you haven’t installed updates for Chrome recently, try checking the Play Store to see if there’s any update at this time. It would also be a good idea to update the rest of your apps if you haven’t yet. If the cause of the problem is known by developers, a new update may include a fix for it. Keep in mind that Chrome has stopped error can be caused by a lot of factors. Although the error itself is common among Android devices, each situation may be different from another. A developer may need to create a new version to fix a particular bug that shows the error in another device.

Chrome has stopped fix #4: Clear Chrome cache

Deleting the cache is one of the direct ways to troubleshoot a problem app. It’s usually effective in fixing minor bugs caused by outdated cache or temporary files. It can be done safely without losing any user-related content in the app. Here’s how it’s done:

  1. Go to the Home screen.
  2. Tap Apps icon.
  3. Open Settings app.
  4. Tap Apps.
  5. If you’re looking for a system or default app, tap on More settings at the upper right (three-dot icon).
  6. Select Show system apps.
  7. Find and tap the appropriate app.
  8. Tap Storage.
  9. Tap Clear Cache button.
  10. Restart the device and check for the problem.

Chrome has stopped fix #5: Reset or re-install Chrome

Should nothing happen after clearing an app’s cache, the next good thing that you can do is to clear the app’s data. Unlike the previous procedure, this one might delete important information or data within the app. For example, if you’re trying to address an issue with a messaging app, clearing its data will delete all your messages. For games, doing this may delete your progress. If you don’t want to lose important stuff, be sure to back them up ahead of time.

  1. Go to the Home screen.
  2. Tap Apps icon.
  3. Open Settings app.
  4. Tap Apps.
  5. If you’re looking for a system or default app, tap on More settings at the upper right (three-dot icon).
  6. Select Show system apps.
  7. Find and tap the appropriate app.
  8. Tap Storage.
  9. Tap Clear Data button.
  10. Restart the device and check for the problem.

Reinstalling the app may also work in this situation. Be sure to do so if clearing the app’s data won’t help.

Chrome has stopped fix #6: Reset network settings

Like any other network troubles, this issue may be resolved by resetting the network settings on your device. A bug in your phone’s network configuration may also be causing the problem. Make sure to include reset network settings in your list of troubleshooting to keep network settings in top shape. Here’s how you do that:

  1. From the Home screen, swipe up on an empty spot to open the Apps tray.
  2. Tap General Management > Reset > Reset network settings.
  3. Tap Reset settings.
  4. If you have set up a PIN, enter it.
  5. Tap Reset settings. Once complete a confirmation window will appear.

Chrome has stopped fix #7: Check for bad app issue

If the Google Chrome app came with the Operating System, which means that it’s one of the pre-installed apps, you can also use Safe Mode to troubleshoot the issue. On Safe Mode, all third party apps are blocked so only preinstalled apps will be running. If Google Chrome works normally on safe mode only, that can mean a third party app is to blame. To check if that’s the case, restart the phone to safe mode. Here’s how to do that:

  1. Press and hold the Power button until the Power off window appears then release.
  2. Touch and hold Power off until the Safe mode prompt appears then release.
  3. To confirm, tap Safe mode.
  4. The process may take up to 30 seconds to complete.
  5. Upon reboot, “Safe mode” appears in the lower-left of the home screen.

Don’t forget: safe mode blocks third party apps but it won’t tell you which of them is the real cause. If you think that there’s a rogue third party app in the system, you must identify it. Here’s what you need to do exactly:

  1. Boot to safe mode.
  2. Check for the problem.
  3. Once you’ve confirmed that a third party app is to blame, you can start uninstalling apps individually. We suggest that you begin with the most recent ones you added.
  4. After you uninstall an app, restart the phone to normal mode and check for the problem.
  5. If your S10 is still problematic, repeat steps 1-4.

Chrome has stopped fix #8: Reset app preferences

Some apps, including Google Chrome for Android, requires default system apps in order to work. Sometimes, these default apps may be turned off by other apps or after some system changes like after an update. To ensure that all default apps are enabled again, you can do these steps:

  1. Open Settings app.
  2. Tap Apps.
  3. Tap on More settings at the upper right (three-dot icon).
  4. Select Reset app preferences.
  5. Restart your S10 and check for the problem.

Chrome has stopped fix #9: Wipe cache partition

In order to load apps quickly, Android stores frequently used items like website links, images, videos, ads, among others in a part in internal storage called cache partition. Sometimes, these items collectively called system cache may get outdated or corrupted causing performance problems or bugs. To ensure that you phone runs efficiently and the cache in top shape, you want to regularly clear the cache partition (about once every few months). When dealing with any app issue, this can also be one of the troubleshooting steps. Here’s how to do it

  1. Turn off the device.
  2. Press and hold the Volume Up key and the Bixby key, then press and hold the Power key.
  3. When the green Android logo displays, release all keys (‘Installing system update’ will show for about 30 – 60 seconds before showing the Android system recovery menu options).
  4. Press the Volume down key several times to highlight ‘wipe cache partition’.
  5. Press Power button to select.
  6. Press the Volume down key until ‘yes’ is highlighted and press the Power button.
  7. When the wipe cache partition is complete, “Reboot system now” is highlighted.
  8. Press the Power key to restart the device.

Chrome has stopped fix #10: Factory reset

Factory reset should be considered if none of the solutions above has worked so far. Make sure to back your personal data up to avoid losing important files.

Below are the two ways to factory reset your S10:

Method 1: How to hard reset on Samsung Galaxy S10 via Settings Menu

This is the easiest way to wipe your Galaxy S10. all you have to do is to go under Settings menu and follow the steps below. We recommend this method if you have no trouble going under Settings.

  1. Create a backup of your personal data and remove your Google account.
  2. Open Settings app.
  3. Scroll to and tap General management.
  4. Tap Reset.
  5. Select Factory data reset from the given options.
  6. Read the information then tap Reset to continue.
  7. Tap Delete All to confirm action.

Method 2: How to hard reset on Samsung Galaxy S10 using hardware buttons

If your case is that the phone is not booting up, or it boots but Settings menu is inaccessible, this method can be helpful. First, you need to boot the device to Recovery Mode. Once you successfully access Recovery, that’s the time that you begin proper master reset procedure. It may take some tries for you before you can access Recovery so be patient and simply try again.

  1. If possible, create a backup of your personal data ahead of time. If your problem prevents you from doing that, then simply skip this step.
  2. Also, you want to make sure that you remove your Google account. If your problem prevents you from doing that, then simply skip this step.
  3. Turn off the device. This is important. If you can’t turn it off, you’ll never be able to boot to Recovery Mode. If you are not able to shut the device off regularly via the Power button, wait until the phone’s battery is drained. Then, charge the phone for 30 minutes before booting to Recovery Mode.
  4. Press and hold the Volume Up button and the Bixby button at the same time.
  5. While still holding the Volume Up and Bixby keys, press and hold the Power button.
  6. The Recovery screen menu will now appear. When you see this, release the buttons.
  7. Use the Volume Down button until you are highlighting ‘Wipe data/factory reset.’
  8. Press the Power button to select ‘Wipe data/factory reset.’
  9. Use Volume Down to highlight Yes.
  10. Press the Power button to confirm factory reset.