How To Fix The Huawei Y9 Black Screen of Death Issue

The #Huawei #Y9 is a mid-range Android smartphone model with the latest variant released last April 2018. This phone has a solid build quality with a 5.93 inch IPS LCD screen having a resolution of 1080 x 2160 pixels. It has a dual rear camera system and a dual selfie camera on the front. Under the hood you will find the HiSilicon Kirin 659 octa core processor which is paired with 4GB of RAM. Although this is a solid performing device there are instances when certain issues can occur which we will be addressing today. In this latest installment of our troubleshooting series we will tackle the Huawei Y9 Black Screen of Death issue.

If you own a Huawei Y9 or any other Android device for that matter then feel free to contact us using this form. We will be more than happy to assist you with any concern that you may have with your device. This is a free service we are offering with no strings attached. We however ask that when you do contact us try to be as detailed as possible so that an accurate assessment can be made and the correct solution can be given.  

How To Fix The Huawei Y9 Black Screen of Death Issue

One major issue that can occur on your phone is when its screen does not work. Nothing can be seen on the display which is why this issue is usually called as the Black Screen of Death. If this happened after you dropped your phone or had your device in contact with water  then it’s very likely that this is caused by a damaged hardware component. If this just happened randomly then there’s a possibility that it is caused by a software glitch. Listed below are the necessary troubleshooting steps that you need to do for this particular problem.

Fully charge the phone battery

One of the main causes as to why the phone screen will not work or why the phone does not seem to turn on is because its battery is drained. To eliminate this possibility you will have to make sure that the battery is fully charged.

  • Clean the charging port of the phone using a can of compressed air making sure to remove any dirt or debris stuck in it.
  • Fully charge the phone with a charging cord and wall charger that have been tested to work on another device.
  • If the phone does not charge with a wall charger then try charging the device from a computer USB port.

Once the battery is fully charged check if the Huawei Y9 Black Screen of Death issue still occurs.

Perform a soft reset

Sometimes corrupted temporary data stored in your phone can cause this problem. To eliminate this possibility you will need to restart your phone as this will usually resolve issue caused by minor software glitches.

  • Press and hold the Power and Volume down key for up to 45 seconds.
  • Wait as the device restarts.

Check if the issue still occurs.

Start the phone in Safe Mode

There are instances when an app you downloaded from the Google Play Store can cause this particular issue. To check if this is the case you will have to start the phone in Safe Mode as only the pre-installed apps are allowed to run in this mode.

  • Power off the phone by holding down the power button for a few seconds.
  • Press and hold the power button and release it when you see the Huawei logo on screen.
  • After releasing the Power key, immediately press and hold the Volume down key.
  • Keep holding the Volume key till the phone completely boots up.
  • Once the phone boots up,  “Safe mode” should be appeared on the bottom of the screen

If the screen works in this mode then the problem could be caused by an app you downloaded. Find out what app this is and uninstall it.

Wipe the cache partition of the phone

There are cases when the cached data stored in the dedicated partition of the phone can become corrupted. When this happens this this will usually cause certain issues to occur on the phone. To eliminate the possibility that this is what’s causing the problem you will have to wipe the cache partition of the phone from the recovery mode.

  • Turn off the device.
  • Press and hold the Volume Up button.
  • While holding the Volume Up button, connect USB charger to the phone.
  • Within a few seconds, your phone will boot into the recovery mode.
  • Now, remove the USB charger.
  • Use volume buttons to highlight ‘wipe cache partition’ and use power key to select it
  • Reboot the system once the process is completed

Check if the issue still occurs.

Perform a factory reset

In case the above steps fails to fix the problem then you should try doing a factory reset in recovery mode. Take note that this will erase your phone data.

  • Turn off the device.
  • Press and hold the Volume Up button.
  • While holding the Volume Up button, connect USB charger to the phone.
  • Within a few seconds, your phone will boot into the recovery mode.
  • Now, remove the USB charger.
  • Use volume buttons to highlight  select wipe cache/factory reset and use power key to select it
  • Reboot the system once the process is completed

Check if the issue still persists. If it does then this might already be caused by a faulty hardware component. The best thing to do right now is to bring the phone to a service center and have it checked.