How To Fix Samsung Galaxy A10 Screen Flickering Issue

The #Samsung #Galaxy #A10 is a mid-range Android smartphone released this year which uses a plastic body and has a 6.2 inch Infinity V HD display. It has a single 13MP f/1.9 rear camera and a single 5MP front camera. Under the hood is an Exynos 7884 processor paired with 2GB of RAM. Although this is a solid performing device there are instances when certain issues can occur which we will be addressing today. In this latest installment of our troubleshooting series we will tackle the Galaxy A10 screen flickering issue.

If you own a Galaxy A10 or any other Android device for that matter then feel free to contact us using this form. We will be more than happy to assist you with any concern that you may have with your device. This is a free service we are offering with no strings attached. We however ask that when you do contact us try to be as detailed as possible so that an accurate assessment can be made and the correct solution can be given.

How To Fix Samsung Galaxy A10 Screen Flickering Issue

Before you troubleshoot this particular problem it’s best to make sure that your phone is running on the latest software version. If an update is available then I suggest that you download and install it first.  Once your phone has the latest software update installed you should proceed with the steps listed below.

Perform a soft reset

The first thing that you will need to do in this case is to refresh the phone software by doing a soft reset. This is recommended in cases where the problem is caused by a minor software glitch.

  • Press and hold the Power and Volume down key for up to 45 seconds.
  • Wait as the device restarts.

Check if the issue still occurs.

Start the phone in Safe Mode

There are instances when an app you downloaded can cause this particular issue. If the app has a few bugs which the developer hasn’t ironed out yet then there’s a chance that the screen will flicker. To check if this is the case you will have to start the phone in Safe Mode as only the pre-installed apps are allowed to run in this mode.

  • Turn the device off.
  • Press and hold the Power key past the screen with the device name.
  • When ‘SAMSUNG’ appears on the screen, release the Power key.
  • Immediately after releasing the Power key, press and hold the Volume down key.
  • Continue to hold the Volume down key until the device finishes restarting.
  • Safe mode will display in the bottom left corner of the screen.
  • Release the Volume down key when you see ‘Safe Mode’.

If the screen flickering does not occur in this mode then the problem could be caused by an app you downloaded. Find out what app this is and uninstall it.

To find the particular app you will have to perform a trial and error method. Start by uninstalling the most recent app you downloaded before the problem occurred then check if the screen still flickers. Repeat this step until the issue will not occur anymore after uninstalling a particular app. This last app is most likely the cause of the problem.

Wipe the cache partition

There are instances when a corrupted system cached data can cause this problem. It’s therefore a good idea to delete this data as the phone will just rebuild this data when it starts again.

  • Turn off the phone.
  • Press and hold the Volume Up key and the Home key, then press and hold the Power key.
  • When the device logo screen displays, release only the Power key
  • When the Android logo displays, release all keys (‘Installing system update’ will show for about 30 – 60 seconds before showing the Android system recovery menu options).
  • Press the Volume down key several times key to highlight ‘wipe cache partition.’
  • Press the Power key to select.
  • Press the Volume down key to highlight ‘yes’ and press the Power key to select.
  • When the wipe cache partition is complete, ‘Reboot system now’ is highlighted.
  • Press the Power key to restart the device.

Check if the issue still occurs.

Perform a factory reset

One last troubleshooting step to consider to fix the Samsung Galaxy A10 screen flickering issue is a factory reset. This will bring your phone back to its original factory condition. Take note that your phone data will be deleted in the process so make sure to backup your phone data before proceeding.

  • Turn off the phone.
  • Press and hold the Volume Up key and the Home key, then press and hold the Power key.
  • When the device logo screen displays, release only the Power key
  • When the Android logo displays, release all keys (‘Installing system update’ will show for about 30 – 60 seconds before showing the Android system recovery menu options).
  • Press the Volume down key several times key to highlight ‘wipe data / factory reset.’
  • Press Power button to select.
  • Press the Volume down key until ‘Yes — delete all user data’ is highlighted.
  • Press Power button to select and start the master reset.
  • When the master reset is complete, ‘Reboot system now’ is highlighted.
  • Press the Power key to restart the device.
  • With no apps installed in the phone, try to check if the issue still occurs.

If the above steps doesn’t fix the problem then you will need to bring the phone to a service center and have it checked as this is most likely caused by a faulty hardware component already, possibly by a defective display assembly.

Engage with us

Feel free to send us your questions, suggestions and problems you’ve encountered while using your Android phone. We support every Android device that is available in the market today. And don’t worry, we won’t charge you a single penny for your questions. Contact us using this form. We read every message we receive but can’t guarantee a quick response. If we were able to help you, please help us spread the word by sharing our posts with your friends.