How To Fix Roku Error Code 003 Issue Quick and Easy Way

The Roku device is one of the best streaming players that can play up to 4K Ultra HD content at a budget friendly price. You can enjoy watching Netflix, YouTube, or any other online streaming content by simply plugging this device to your TV. Although using this device is as simple as plug and play there are instances when the Roku error code 003 issue will occur and this is what we will be addressing today.

If you have any issues with your computer or Android device then feel free to contact us using this form. We will be more than happy to assist you with any concerns that you may have with your device. This is a free service we are offering with no strings attached. We however ask that when you do contact us try to be as detailed as possible so that an accurate assessment can be made and the correct solution can be given.  

How To Fix Roku Error Code 003 Issue

Before performing the recommended troubleshooting steps for this particular problem I suggest that you try restarting the system first. Remove the Roku device from your TV and disconnect its power source then turn off the TV. Wait for at least a minute then turn on the TV and connect the Roku device. This will refresh the operating system as well as remove corrupt temporary data and is quite effective in fixing most software related issues.

There are several factors that can cause this particular problem ranging from a server problem to an issue with the network security protocol. Listed below are the troubleshooting steps you need to do to fix this problem.

Check if the Roku server is online

The first thing you will need to do in this case is to check if there is a server outage or if there is a server maintenance going on. You can visit this website https://www.roku.com/en-gb/maintenance to check if there is any server maintenance being done. You can also visit https://downdetector.com/status/roku/ to check if the Roku servers are online.

Change the network security protocol

One of the reasons why this issue occurs is because of the Wi-Fi security protocol. If you are using AES then try changing this to WPA2-PSK (TKIP).

  • Go to your router’s settings by typing its IP address on a browser. This address is mostly found at the back of the router or is present in its documentation. Most of the time it should be  ‘192.168.8.1’.
  • Once in settings, navigate to Wireless or Security and make sure that the security mode is not set as AES . It can be WPA2-PSK (TKIP).
  • After changing the security method, you can try connecting from your Roku to the network with the new settings implemented.

Check if the  Roku error code 003 issue still occurs.

Use a wired connection

In case the above steps fails to fix the problem then try using an Ethernet connection instead of a wireless connection to connect the Roku device to the router. This way you can eliminate the possibility of the WiFi connection causing the problem.

Check if the  Roku error code 003 issue still occurs.

Engage with us

Feel free to send us your questions, suggestions and problems you’ve encountered while using your Android phone. We support every Android device that is available in the market today. And don’t worry, we won’t charge you a single penny for your questions. Contact us using this form. We read every message we receive but can’t guarantee a quick response. If we were able to help you, please help us spread the word by sharing our posts with your friends.