How To Fix Honor View 20 Screen Flickering Issue

The #Honor #View20 is a flagship quality Android smartphone released early this year that’s best known for having a 48MP rear camera sensor. This phone has a metal frame with a 6.4 inch IPS LCD display making it a good device to use for viewing various multimedia content. Under the hood is a HiSilicon Kirin 980 combined with 8GB of RAM making it able to run multiple apps with ease. Although this is a solid performing device there are instances when certain issues can occur which we will be addressing today. In this latest installment of our troubleshooting series we will tackle the Honor View 20 screen flickering issue.

If you own an Honor View 20 or any other Android device for that matter then feel free to contact us using this form. We will be more than happy to assist you with any concern that you may have with your device. This is a free service we are offering with no strings attached. We however ask that when you do contact us try to be as detailed as possible so that an accurate assessment can be made and the correct solution can be given.

How To Fix Honor View 20 Screen Flickering Issue

Before you do any of the recommended troubleshooting steps for this particular problem it’s best to make sure that the phone is running on the latest software version. If an update is available then I suggest that you download and install it first.

It’s very likely that this problem is caused by a software glitch which is why we will be concentrating our troubleshooting efforts on the software side of the device.

Perform a soft reset

The first thing you will need to do is to refresh the phone software to eliminate the possibility of the problem being caused by a minor software glitch. While this step is usually done on an unresponsive device it should also work in this case. This can be done easily by simply restarting the device.

  • Press and hold the Power key for up to 45 seconds.
  • Wait as the device restarts.

Check if the issue still occurs.

Start the phone in Safe Mode

There are instances when an app you downloaded will cause issues on the phone when they are installed. This can be due to bugs in the app or compatibility issues between the app and your phone. To check if an app you downloaded is causing the problem you will have to start the phone in Safe Mode as only the pre-installed apps are allowed to run in this mode.

  • Power off the phone by holding down the power button for a few seconds.
  • Press and hold the power button and release it when you see the Honor logo on screen.
  • After releasing the Power key, immediately press and hold the Volume down key.
  • Keep holding the Volume key till the phone completely boots up.
  • Once the phone boots up,  “Safe mode” should be appeared on the bottom of the screen

In case the issue does not occur in this mode then it is most likely caused by an app you installed. Find out what app this is and uninstall it.

To find out what app is causing the problem you will need to do a trial and error method. Restart the phone normally then uninstall the last app you downloaded before the issue occured. Check if the screen still flickers. Repeat this step until the screen stops flickering after uninstalling an app. That particular app is most likely what’s causing the problem.

Wipe the cache partition of the phone

There are cases when the cached data stored in the dedicated partition of the phone can become corrupted. When this happens this this will usually cause certain issues to occur on the phone. To eliminate the possibility that this is what’s causing the problem you will have to wipe the cache partition of the phone from the recovery mode.

  • Turn off your phone.
  • Press and hold Volume UP button along with Power button on your  device simultaneously for a few seconds
  • The phone will enter the stock recovery mode
  • Use volume buttons to highlight ‘wipe cache partition’ and use power key to select it
  • Reboot the system once the process is completed

Check if the issue still occurs.

Perform a factory reset

In case the above steps fails to fix the Honor View 20 screen flickering issue then chances are this is caused by a system glitch. The best way to deal with this right now is to perform a factory reset. Take note that this will erase your phone data.

  • Turn off your phone.
  • Press and hold Volume UP button along with Power button on your  device simultaneously for a few seconds
  • The phone will enter the stock recovery mode
  • Use volume buttons to highlight  select wipe cache/factory reset and use power key to select it
  • Reboot the system once the process is completed

Setup the phone, but do not install any apps yet, then check if the issue still occurs. If it does then this might already be caused by a faulty hardware component. The best thing to do right now is to bring the phone to a service center and have it checked.