How To Fix The Vivo Y93s Won’t Turn On Issue

The #Vivo #Y93s is a mid-range Android smartphone model that has several good features. This device has a 6.2 inch IPS LCD display with a resolution of 720 x 1520 pixels. It uses a dual rear camera system and a single 8MP selfie camera on the front. Under the hood is a Mediatek MT6762 Helio P22 octa core processor which is paired with 4GB of RAM. Although this is a solid performing device there are instances when certain issues can occur which we will be addressing today. In this latest installment of our troubleshooting series we will tackle the Vivo Y93s won’t turn on issue.

If you own a Vivo Y93s or any other Android device for that matter then feel free to contact us using this form. We will be more than happy to assist you with any concern that you may have with your device. This is a free service we are offering with no strings attached. We however ask that when you do contact us try to be as detailed as possible so that an accurate assessment can be made and the correct solution can be given.

How To Fix The Vivo Y93s Won’t Turn On Issue

One of the major issues that can occur on your phone is when it does not turn on. This can be caused by several factors  but the reasons can be classified as either a hardware or software problem. If this is caused by a damaged hardware component then the only way to fix this is to bring the phone to a service center and have it repaired. If however the issue is caused by a software glitch then there’s a possibility that this can be fixed on your end by following the troubleshooting steps listed below.

Charge the phone

The first thing that you will want to do in this case is to make sure that the phone battery has sufficient charge. There have been several cases when the phone battery will get fully drained thus causing this problem. This factor is what we will be eliminating by following the steps listed below.

  • Clean the charging port of the phone using a can of compressed air. Make sure that any dirt or debris stuck in this port is removed.
  • Fully charge the phone using its wall charger.
  • In case the phone does not charge then try using a different charging cord and wall charger. You should also try charging the phone from a computer USB port in case charging using the wall charger fails to work.

Once the battery has been fully charged try turning on the phone. If it still does not turn on then proceed with the additional troubleshooting steps listed below.

Perform a soft reset

You should refresh the phone software to eliminate the possibility of the problem being caused by a minor software glitch. This can be done easily by simply restarting the device. Press and hold the Power button and Volume Down until the device powers off, approximately 8 seconds, then release.

Check if the issue still occurs.

Wipe the cache partition of the phone

Your phone will usually store the most commonly used data to improve its performance. There are cases when this data stored in the dedicated partition of the phone can become corrupted. When this happens this this will usually cause certain issues to occur on the phone. To eliminate the possibility that this is what’s causing the problem you will have to wipe the cache partition of the phone from the recovery mode.

  • Press and hold the Volume Down + Power key together for a short while.
  • Release all buttons when Fastboot Mode appears.
  • In this mode select “Recovery”. Use Volume Down to navigate and the Power key to confirm that.
  • Press the volume key to highlight the Wipe cache option then the power key to select it
  • Use the volume keys to go to “reboot system now” and press the power key.

Check if the Vivo Y93s won’t turn on issue still occurs.

Perform a factory reset

In case the phone still does not turn on then one last troubleshooting step you can perform is a factory reset. Take note that this will erase your phone data.

  • Press and hold the Volume Down + Power key together for a short while.
  • Release all buttons when Fastboot Mode appears.
  • In this mode select “Recovery”. Use Volume Down to navigate and the Power key to confirm that.
  • Press the volume key to highlight the “wipe data / factory reset” and press the power button to enter. A screen with many NOs and a YES will appear, with the volume keys again go to the YES and press with the power key.
  • Use the volume keys to go to “reboot system now” and press the power key.

In case the above steps fails to fix the problem then you will need to bring the phone to a service center and have it checked as this might already be caused by a faulty hardware component.

Engage with us

Feel free to send us your questions, suggestions and problems you’ve encountered while using your Android phone. We support every Android device that is available in the market today. And don’t worry, we won’t charge you a single penny for your questions. Contact us using this form. We read every message we receive but can’t guarantee a quick response. If we were able to help you, please help us spread the word by sharing our posts with your friends.