How To Fix The LG K10 Screen Flickering Issue

The #LG #K10 is a mid-range Android smartphone that has a good build quality with the latest version released in June 2018. It is made of a plastic body with a 5.3 inch IPS LCD display having a resolution of 720 x 1280 pixels. It has a single 13MP camera at the back and a single 8MP camera on the front. Under the hood is  Mediatek MT6750 processor paired with 3GB of RAM which should be enough to make apps run smoothly. Although this is a solid performing device there are instances when certain issues can occur which we will be addressing today. In this latest installment of our troubleshooting series we will tackle the LG K10 screen flickering issue.

If you own a LG K10 or any other Android device for that matter then feel free to contact us using this form. We will be more than happy to assist you with any concern that you may have with your device. This is a free service we are offering with no strings attached. We however ask that when you do contact us try to be as detailed as possible so that an accurate assessment can be made and the correct solution can be given.

How To Fix The LG K10 Screen Flickering Issue

Before you do any of the recommended troubleshooting steps for this particular issue it’s best to make sure that your phone is running on the latest software version. If an update is available then I suggest that you download and install it first. This will at least minimize the possibility of the problem being caused by an old software version. Once you have the latest software version installed then proceed with the troubleshooting steps listed below.

Perform a soft reset

The first thing you will need to do in this case is to refresh the phone software which can be done by simply restarting the phone. Although this is usually done on an unresponsive device it should also work in this case. To do this step just press and hold the Power button and Volume Down until the device powers off, approximately 8 seconds, then release. Your phone should restart. Once this is done check if the screen still flickers.

Start the phone in Safe Mode

There are cases when an app you downloaded from the Google Play Store will cause issues on the phone when it is installed. This happens if the particular app still has  bugs or has compatibility issues with your device. To check if an app you downloaded is causing the problem you will have to start the phone in Safe Mode as only the pre-installed apps are allowed to run in this mode.

  • With the screen on, press and hold the Power key.
  • In the options menu that displays, tap Power off and restart.
  • The device will restart and the Safe mode overlay will no longer show on the screen.

In case the issue does not occur in this mode then it is most likely caused by an app you installed. Find out what app this is and uninstall it.

To find out what app is causing the problem you will need to do a trial and error method.  Start the phone normally then uninstall an app. Once the app has been uninstalled check if the screen still flickers. Repeat this until the screen no longer flickers. The last app you uninstalled is most likely the culprit.

Wipe the cache partition of the phone

Sometimes the cached data stored in the dedicated partition of the phone can become corrupted. When this happens this will usually cause certain issues to occur on the phone. To eliminate the possibility that this is what’s causing the problem you will have to wipe the cache partition of the phone from the recovery mode.

  • From the Home screen, tap Settings.
  • Tap the ‘General’ tab.
  • Tap Storage > Internal storage.
  • Wait for menu options to finish calculating.
  • Tap Free up space.
  • Tap Temporary files & raw files.
  • Select the following options: Cached data, Clip tray temporary files, Raw files from camera.
  • Tap Delete > DELETE

Check if the LG K10 screen flickering issue still occurs.

Perform a factory reset

In case the above steps fails to fix the LG K10 screen flickering issue then your last option is to do a factory reset. Make sure to backup your phone data before doing the reset as this will be deleted in the process.

  • Turn off the device.
  • Press and hold the Power and Volume down buttons.
  • When the LG logo appears, quickly release and then re-hold the Power button while continuing to hold the Volume down button.
  • When the ‘Delete all user data (including LG and carrier apps) and reset all settings’ message appears, use the Volume down button to highlight Yes.
  • Press the Power button to reset the device.

Once the reset is complete setup your phone again, but don’t install any apps yet,  then check if the screen still flickers. If it does then this is most likely caused by a faulty hardware component in which case you will need to bring the phone to a service center and have it checked.

Engage with us

Feel free to send us your questions, suggestions and problems you’ve encountered while using your Android phone. We support every Android device that is available in the market today. And don’t worry, we won’t charge you a single penny for your questions. Contact us using this form. We read every message we receive but can’t guarantee a quick response. If we were able to help you, please help us spread the word by sharing our posts with your friends.