How To Fix Huawei Mate 20 X Won’t Turn On Issue

The #Huawei #Mate20X is a premium Android smartphone first released late last year which is best known for its large display. It’s the bigger version of the Mate 20 model having a 7.2 inch OLED display with a resolution of 1080 x 2244 pixels. It uses a triple rear camera system which is co-developed by Leica and it also has a single 24MP front camera. Under the hood is a HiSilicon Kirin 980 paired with 8GB of RAM. Although this is a solid performing device there are instances when certain issues can occur which we will be addressing today. In this latest installment of our troubleshooting series we will tackle the Huawei Mate 20X won’t turn on issue.

If you own a Huawei Mate 20 X or any other Android device for that matter then feel free to contact us using this form. We will be more than happy to assist you with any concern that you may have with your device. This is a free service we are offering with no strings attached. We however ask that when you do contact us try to be as detailed as possible so that an accurate assessment can be made and the correct solution can be given.  

How To Fix Huawei Mate 20X Won’t Turn On Issue

A major issue that you might experience on your mobile device is when it does not turn  on. When this happens the first thing you will need to do is to make sure that the phone battery is fully charged by following the steps listed below.

  • Clean the charging port of the phone using a can of compressed air. Make sure that any dirt or debris stuck in this port is removed.
  • Fully charge the phone using its wall charger.
  • In case the phone does not charge then try using a different charging cord and wall charger. You should also try charging the phone from a computer USB port in case charging using the wall charger fails to work.

Once the battery has been fully charged try turning on the phone. If it still does not turn on then proceed with the additional troubleshooting steps listed below.

Perform a soft reset

Try to refresh the phone software to eliminate the possibility of the problem being caused by a minor software glitch. This is usually done on an unresponsive device however it should also work in this case as it will refresh the phone software. This can be done easily by simply restarting the device.

  • Press and hold the Power and Volume down key for up to 45 seconds.
  • Wait as the device restarts.

Check if the issue still occurs.

Start the phone in Safe Mode

There are cases when an app you downloaded will cause issues on the phone when they are installed. To check if an app you downloaded is causing the problem you will have to start the phone in Safe Mode as only the pre-installed apps are allowed to run in this mode.

  • Power off the phone by holding down the power button for a few seconds.
  • Press and hold the power button and release it when you see the Huawei logo on screen.
  • After releasing the Power key, immediately press and hold the Volume down key.
  • Keep holding the Volume key till the phone completely boots up.
  • Once the phone boots up,  “Safe mode” should be appeared on the bottom of the screen

In case the issue does not occur in this mode then it is most likely caused by an app you installed. Find out what app this is and uninstall it. You will need to perform a trial and error method to find out what app is causing the problem.

Wipe the cache partition of the phone

There are cases when the cached data stored in the dedicated partition of the phone can become corrupted. When this happens this this will usually cause certain issues to occur on the phone. To eliminate the possibility that this is what’s causing the problem you will have to wipe the cache partition of the phone from the recovery mode.

  • Turn off your phone.
  • Press and hold Volume UP button along with Power button on your  device simultaneously for a few seconds
  • The phone will enter the stock recovery mode
  • Use volume buttons to highlight ‘wipe cache partition’ and use power key to select it
  • Reboot the system once the process is completed

Check if the issue still occurs.

Perform a factory reset

In case the above steps fails to fix the Huawei Mate 20 X won’t turn on issue then there is a chance that this is  caused by a system glitch. The best way to deal with this right now is to perform a factory reset. Take note that when you perform this step your phone data will be deleted.

  • Turn off your phone.
  • Press and hold Volume UP button along with Power button on your  device simultaneously for a few seconds
  • The phone will enter the stock recovery mode
  • Use volume buttons to highlight  select wipe cache/factory reset and use power key to select it
  • Reboot the system once the process is completed

In case the above steps fails to fix the problem then you will need to bring the phone to a service center and have it checked as this might already be caused by a faulty hardware component.

Engage with us

Feel free to send us your questions, suggestions and problems you’ve encountered while using your Android phone. We support every Android device that is available in the market today. And don’t worry, we won’t charge you a single penny for your questions. Contact us using this form. We read every message we receive but can’t guarantee a quick response. If we were able to help you, please help us spread the word by sharing our posts with your friends.