How to troubleshoot Samsung Galaxy S7 Edge screen flickering issue & other display problems

While many Samsung Galaxy S7 Edge owners were complaining about power and system related issues after the Marshmallow update, there are some that encountered screen related problems especially screen flickering issues.

The problems I addressed below are just some of those that were reported by our readers. It seems like it’s a widespread problem and the fix may need to come from Samsung especially for screen-related issues that occurred immediately after the Marshmallow update.

Read on to learn more about these problems and how to troubleshoot them. If you have other concerns, try to find similar issues from our S7 Edge troubleshooting page as we’ve already addressed a lot of problems with this phone since its release you may also contact us if you need more help. Just fill up our Android issues questionnaire and we’ll include your issue on our future posts.

Q: “This morning I got a notice on my phone that an android update was available. I installed it. And now my screen is constantly flickering and jumping around.. Also if I turn up the brightness too high, the entire screen goes white/yellow and I can see nothing. Any ideas?? I have an unlocked phone running an AT&T SIM card.

A: Screen flickering issues can actually range from a minor app and firmware issue to a more complicated hardware problem. In your case, it seems like it’s all the new firmware that is to blame but you still have to rule out the possibility that your apps have something to do with it. So, the first thing you have to do is boot your S7 Edge in safe mode to temporarily disable all downloaded apps and third-party services. Then, observe your phone’s screen to see if the problem still occurs. Here’s how you boot your device in safe mode:

  1. Press and hold the Power key.
  2. As soon as you can see the ‘Samsung Galaxy S7 EDGE’ on the screen, release the Power key and immediately hold the Volume Down key.
  3. Continue holding the Volume Down button until the device finishes rebooting.
  4. You may release it when you can see ‘Safe mode’ in the bottom left corner of the screen.

Should the problem occur in safe mode, then it could be an issue with the new firmware or possibly a hardware problem. The next thing you have to do is try to delete the cache of the previous system.

System caches aren’t automatically deleted when new firmware is installed. In this case, the new system may continue using them and that’s when complications occur. The problem might be caused by incompatible or corrupt caches. Due to this, you need to delete the caches, here’s how:

  1. Turn off your Samsung Galaxy S7 Edge.
  2. Press and then hold the Home and Volume UP keys, then press and hold the Power key.
  3. When the Samsung Galaxy S7 Edge shows on the screen, release the Power key but continue holding the Home and Volume Up keys.
  4. When the Android logo shows, you may release both keys and leave the phone be for about 30 to 60 seconds.
  5. Using the Volume Down key, navigate through the options and highlight ‘wipe cache partition.’
  6. Once highlighted, you may press the Power key to select it.
  7. Now highlight the option ‘Yes’ using the Volume Down key and press the Power button to select it.
  8. Wait until your phone is finished wiping the cache partition. Once completed, highlight ‘Reboot system now’ and press the Power key.
  9. The phone will now reboot longer than usual.

At this point, if the problem remained, it could mean that it’s a serious firmware or hardware issue. I am not sure if you still can backup your data and files because you really need to reset the phone to bring it back to its default settings while leaving the new firmware installed on your phone.

The master reset can fix a lot of problems with the firmware and the hardware so it’s necessary you do this before you visit a technician to have the phone checked. For us advanced users, we often resort to the re-flashing of the firmware but we really don’t want to suggest that to average users as they may end up messing up their devices all the more. So, if the procedure below fails, send the phone in for checkup and/or repair:

  1. Backup your data.
  2. Remove your Google account.
  3. Disengage screen lock.
  4. Turn off your Samsung Galaxy S7 Edge.
  5. Press and then hold the Home and Volume UP keys, then press and hold the Power key.

NOTE: It doesn’t matter how long you press and hold the Home and Volume Up keys, it won’t affect the phone but by the time you press and hold the Power key, that’s when the phone starts to respond.

  1. When the Samsung Galaxy S7 Edge shows on the screen, release the Power key but continue holding the Home and Volume Up keys.
  2. When the Android logo shows, you may release both keys and leave the phone be for about 30 to 60 seconds.

NOTE: The “Installing system update” message may show on the screen for several seconds before displaying the Android system recovery menu. This is just the first phase of the entire process.

  1. Using the Volume Down key, navigate through the options and highlight ‘wipe data / factory reset.’
  2. Once highlighted, you may press the Power key to select it.
  3. Now highlight the option ‘Yes — delete all user data’ using the Volume Down key and press the Power button to select it.
  4. Wait until your phone is finished doing the Master Reset. Once completed, highlight ‘Reboot system now’ and press the Power key.
  5. The phone will now reboot longer than usual.

Q: “I am currently in Germany, I got an update notification on my phone for the operating system. I installed and now the entire screen flickers, has green and pink stripes and the battery gets very hot when i try to do anything. I have rebooted and no change, start in safe mode – no change. I have done a factory reset – no change. I am at a loss and can’t find any help online any where. I have the SMG935FD – dual sim international version. I have not installed any new applications in the last month and all was fine until this morning.” — Peter

A: Hey Pete! Your problem is the same as the one I addressed above but in your case, you’ve already done the basic troubleshooting procedures to rule out possibilities. I think this issue can be fixed by re-installing the firmware but you have to do it manually using a computer and the flashing tool Odin.

Apparently, it’s a firmware issue and unless Samsung addresses it (by rolling out another update that doesn’t have this kind of issue), the only viable option is to downgrade your phone to Lollipop. It’s a very inconvenient thing to do not to mention risky but if it’s the only option left to make your phone work again, I think it’s worth all the troubles. The problem is not everyone knows how to manually flash a firmware to a phone. So, you really need a technician’s help for this.

I feel sorry that many S6 Edge+ owners are experiencing this issue. We sincerely hope Samsung will fix it as soon as possible.

Q: “The screen will turn on but it won’t be bright and the screen flickers plus if I click on a app the phone will turn black. When I push the power button a white stripe will appear on the bottom of the screen and when I put a bright light on the top sensors the display will turn on but then the screen eventually  turn black.

A: If this problem occurred after the Marshmallow update, then it’s no different from the first two issues I addressed above. You have to do the standard troubleshooting procedure before sending the phone in for checkup and/or repair.

However, if it occurred even with the update, then there’s a chance it’s a hardware problem especially if the phone got in contact with liquid or got dropped recently. You need a technician to check it for you.

Q: “I was on my phone whilst on charge when it suddenly (hard to describe) went black screen then started sketching out only light on the top of the screen then after a while light shows down the screen but it’s all misty. Practically like if I had dropped it and ruined the entire pixel hardware, I’ve only had it a month, no scratches on the screen and I’ve never dropped it, I’m hoping the heat hasn’t completely fried the display.

A: I was actually thinking the same thing. The phone may have overheated and there’s a possibility something got fried inside. But I suggest you follow the standard troubleshooting procedures above and if the problem remained after that, you really have to let a technician take a look at it.

Connect with us

We are always open to your problems, questions and suggestions, so feel free to contact us by filling up this form. This is a free service we offer and we won’t charge you a penny for it. But please note that we receive hundreds of emails every day and it’s impossible for us to respond to every single one of them. But rest assured we read every message we receive. For those whom we’ve helped, please spread the word by sharing our posts to your friends or by simply liking our Facebook and Google+ page or follow us on Twitter.


Leave a Reply
  1. I have the same problem except it a green screen and a lite reddish pink screen where I can hardly see the stuff on the screen. I can’t even shut it off. It goes black then green, so I just left it alone to see what happens and if it goes back to normal or is it doing something that got messed up with loading or something or maybe its time for a new phone. But mine is like brand new no scratches or nothing like it just came out the box. protective cover for the phone. Hopefully, it goes back to normal, I pray it does. if somebody can help let me know.

  2. hi my s7 edge phone got dropped and you can see a faint crack line all the way down the screen and the picture flickers then goes black and you have to press the power button to see anything then top half of phone pic is fine but at the bottom you get one thick white line then flickering grey lines so you have to hope you pressing right area at bottom of screen for menu etc any ideas please x

  3. My son’s s7 edge starting flashing green and white and will not stop..He can still use it at the moment but I’m afraid it’s just going to get worse and he won’t be able to see anything but the flashing green and white screen..What could be wrong with it and can it be fixed,it hasn’t been dropped or gotten wet..

  4. i have samgung s7 edge it was working fine and now its freaking out on me green screen and wont let me do anything in it

  5. My Samsung galaxy edge. S7 was flickering and I tried cleaning and later I got 3 vertical lines across the face of the phone and left it to be charged and the next day the screen wen completely black and wouldn’t show a thing but phone kept on flashing the red LED light and constantly vibrating and nothing has changed as I can’t even power off . Can you help please?

  6. My phone does the exact same thing, feel so helpless cant read my , emails,whatsapps,messages and my customers probably feel that i ma ignoring them . If i had the money I would be heading back to iPhone. Crappy phone indeed.

  7. My phone flicker when turn on and green screen on boot up can’t open apps turns black I tried all the steps but left me on the green screen

  8. I did the latest upgrade and now the green led doesn’t flash when I receive a text message. I checked the notification and led’s are supposedly set to show for the various notificaitons

  9. I have exactly the same first issue problem.
    I followed the guideline instructions above but can not fixed the problems cause the screen so brightness unable to see step to step.
    May be have to return the phone or exchange new device. The phone just 1 week old comes with stock firmware not updated its works right out the box just 5 cycles charge
    I think Samsung needs to be improved with engineering department after Note 7 issues.

  10. My Edge Flickers and I am unable to turn the phone off…I don’t know what to do…I can not answer calls…I can not do anything….

    Is it possible they will give me the new Note? I can’t stand this phone…

Leave a Reply

Required fields are marked *

9 Best DirecTV Now Alternative In 2019

5 Best USB Microphones For Podcasts And YouTubers In 2019